McMaster-Carr logo
    Filter by
    Fastener Head Type
    Industrial Info Compare
    Connection Hardware
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    Drill Bit Decimal Size Equivalent
    Drive Size
    Head Width
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    63 Products

    Sleeve Anchors for Block and Brick

    Mount machinery, railings, and framing in walls and floors. These anchors have a sleeve that expands inside your hole to create a strong grip. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials like block and brick. You can use these anchors as an alternative to wedge anchors in concrete near edges, corners, or other weak points, but they are not as strong.
    To install, drive the anchor through your machinery into a drilled hole until the head meets the surface. Then, tighten the nut or flat head to expand the anchor sleeve. Remove your machinery by unfastening the nut or flat head, but the anchor itself cannot be removed.
    Anchors with Hex Nut
    Image of Product. Front orientation. Contains Annotated. Anchors. Sleeve Anchors for Block and Brick, Hex Nut.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Thread
    Ultimate
    Strength, lbf
    Lg.
    Size
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/4" Diameter
    1 1/8"10-24
    		1/2"1/2"1/4"
    		6401,0004,000 psi Concrete22597046A129000000
    1 5/8"10-24
    		1 1/4"1/2"1/4"
    		6401,0004,000 psi Concrete21097046A13100000
    2 5/8"10-24
    		2"1/2"1/4"
    		6401,0004,000 psi Concrete21097046A1320000
     
    5/16" Diameter
    1 7/8"1/4"-20
    		1 1/4"1"5/16"
    		1,4002,3604,000 psi Concrete122597046A11100000
    2 3/4"1/4"-20
    		2"1"5/16"
    		1,4002,3604,000 psi Concrete122597046A11200000
     
    3/8" Diameter
    2 1/4"5/16"-18
    		1 1/2"1 1/4"3/8"
    		2,1604,1204,000 psi Concrete181097046A1130000
    3 3/8"5/16"-18
    		2 5/8"1 1/4"3/8"
    		2,1604,1204,000 psi Concrete181097046A1140000
    4 3/8"5/16"-18
    		3 5/8"1 1/4"3/8"
    		2,1604,1204,000 psi Concrete181097046A1150000
     
    1/2" Diameter
    2 7/8"3/8"-16
    		2"1 1/2"1/2"
    		2,5804,8604,000 psi Concrete261097046A11600000
    3 3/8"3/8"-16
    		2 1/2"1 1/2"1/2"
    		2,5804,8604,000 psi Concrete261097046A11700000
    4 3/8"3/8"-16
    		3 1/2"1 1/2"1/2"
    		2,5804,8604,000 psi Concrete26597046A1180000
    5 3/4"3/8"-16
    		4"1 1/2"1/2"
    		2,5804,8604,000 psi Concrete26597046A11900000
    6 3/4"3/8"-16
    		4 7/8"1 1/2"1/2"
    		2,5804,8604,000 psi Concrete26597046A12100000
     
    5/8" Diameter
    3 1/4"1/2"-13
    		2"2"5/8"
    		5,6204,8604,000 psi Concrete501097046A12200000
    3 3/4"1/2"-13
    		2 5/8"2"5/8"
    		5,6204,8604,000 psi Concrete501097046A12300000
    5"1/2"-13
    		4"2"5/8"
    		5,6204,8604,000 psi Concrete50597046A12400000
    6 1/4"1/2"-13
    		4"2"5/8"
    		5,6204,8604,000 psi Concrete50597046A12500000
     
    3/4" Diameter
    3 5/8"5/8"-11
    		2 1/2"2 1/4"3/4"
    		5,82011,0404,000 psi Concrete90597046A12600000
    5 1/8"5/8"-11
    		4"2 1/4"3/4"
    		5,82011,0404,000 psi Concrete90197046A1270000
    7 1/8"5/8"-11
    		6"2 1/4"3/4"
    		5,82011,0404,000 psi Concrete90197046A1280000
     
    Corrosion-Resistant 18-8 Stainless Steel
     
    5/16" Diameter
    1 7/8"1/4"-20
    		1"1 1/8"5/16"
    		1,8801,6804,000 psi Concrete22596892A23100000
    2 3/4"1/4"-20
    		2"1 1/8"5/16"
    		1,8801,6804,000 psi Concrete22196892A2440000
     
    3/8" Diameter
    2 1/8"5/16"-18
    		1 1/4"1 1/4"3/8"
    		3,0002,0804,000 psi Concrete26196892A2580000
    3 1/4"5/16"-18
    		2 1/4"1 1/4"3/8"
    		3,0002,0804,000 psi Concrete26196892A2740000
     
    1/2" Diameter
    2 5/8"3/8"-16
    		1 5/8"1 1/2"1/2"
    		4,8006,0004,000 psi Concrete38196892A2870000
    4 1/2"3/8"-16
    		3"1 1/2"1/2"
    		4,8006,0004,000 psi Concrete38196892A30000000
     
    5/8" Diameter
    5"1/2"-13
    		4 1/4"2"5/8"
    		6,0008,4004,000 psi Concrete75196892A31400000
     
    3/4" Diameter
    3 3/8"5/8"-11
    		2 1/4"2"3/4"
    		8,80012,4004,000 psi Concrete110196892A32900000
    5"5/8"-11
    		3 1/4"2"3/4"
    		8,80012,4004,000 psi Concrete110196892A34300000
     
    Anchors with Flat Head
    Image of Product. Front orientation. Contains Annotated, Inset. Anchors. Sleeve Anchors for Block and Brick, Anchors with Flat Head.
    The flat head creates a flush finish in countersunk holes.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Thread
    Ultimate
    Strength, lbf
    Lg.
    Size
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/4" Diameter
    1 1/2"10-24
    		5/8"5/8"1/4"
    		6401,0004,000 psi Concrete62597480A141000000
    2 1/4"10-24
    		1 1/4"5/8"1/4"
    		6401,0004,000 psi Concrete62597480A14200000
    3"10-24
    		2"5/8"1/4"
    		6401,0004,000 psi Concrete62597480A14300000
    4"10-24
    		2 1/2"5/8"1/4"
    		6401,0004,000 psi Concrete62597480A14400000
    5 1/4"10-24
    		2 1/2"5/8"1/4"
    		6401,0004,000 psi Concrete61097480A14500000
     
    5/16" Diameter
    2 1/2"1/4"-20
    		1 1/4"1 1/4"5/16"
    		1,4802,2804,000 psi Concrete121097480A14600000
     
    3/8" Diameter
    2 3/4"5/16"-18
    		1 5/8"1 5/8"3/8"
    		2,2804,0004,000 psi Concrete181097480A14800000
    4"5/16"-18
    		2 5/8"1 5/8"3/8"
    		2,2804,0004,000 psi Concrete181097480A14900000
    5"5/16"-18
    		1 5/8"1 5/8"3/8"
    		2,2804,0004,000 psi Concrete181097480A15100000
    6"5/16"-18
    		1 5/8"1 5/8"3/8"
    		2,2804,0004,000 psi Concrete181097480A15200000
     

    Bolt-Style Sleeve Anchors for Block and Brick

    Remove the bolt so the anchor is flush with your walls and floors to slide components past these anchors, making it easier to install or make adjustments. They’re best for door frames that need to be pressed into place or machinery you service frequently. All have a sleeve that expands inside your hole to create a strong grip. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials like block and brick. You can use these anchors as an alternative to wedge anchors in concrete near edges, corners, or other weak points, but they are not as strong.
    To install, drive the anchor through your component into a drilled hole until the head meets the surface. Then, tighten the bolt to expand the anchor sleeve. As you tighten, the nylon ring compresses to secure the component against the surface. You can remove the bolt, but the anchor itself cannot be removed.
    Anchors with Hex Head
    Image of Product. Front orientation. Contains Annotated. Anchors. Bolt-Style Sleeve Anchors for Block and Brick, Anchors with Hex Head.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Thread
    Ultimate
    Strength, lbf
    Each
    Package
    Lg.
    Size
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Each
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant 18-8 Stainless Steel
     
    1/4" Diameter
    1 3/4"10-24
    		3/4"1 1/4"1/4"
    		1,4802,0804,000 psi Concrete392405A19400000492405A102000000
    3"10-24
    		3/4"1 1/4"1/4"
    		1,4802,0804,000 psi Concrete392405A1980000492405A10400000
     
    3/8" Diameter
    2 1/4"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete1292405A2000000492405A10600000
    3 1/2"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete1292405A20200000492405A10800000
    4"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete1292405A20300000492405A11100000
     
    1/2" Diameter
    2 3/4"3/8"-16
    		1"2 1/2"1/2"
    		6,4008,0004,000 psi Concrete2592405A30000000492405A11300000
    4 3/4"3/8"-16
    		1"2 1/2"1/2"
    		6,4008,0004,000 psi Concrete2592405A30200000492405A11500000
     
    Anchors with Flat Head
    Image of Product. Front orientation. Contains Annotated. Anchors. Bolt-Style Sleeve Anchors for Block and Brick, Anchors with Flat Head.
    The flat head creates a flush finish in countersunk holes.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Thread
    Ultimate
    Strength, lbf
    Each
    Package
    Lg.
    Size
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Certification
    Each
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    3/8" Diameter
    3 3/4"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete25UL Listed
    		92403A803000001092403A823000000
    5"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete25UL Listed
    		92403A80500001092403A82500000
    6"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete25UL Listed
    		92403A80600001092403A82600000
     
    1/2" Diameter
    5"3/8"-16
    		1"2 1/2"1/2"
    		6,4008,0004,000 psi Concrete45UL Listed
    		92403A80100001092403A82100000
     
    5/8" Diameter
    5 1/2"1/2"-13
    		1 1/8"2 3/4"5/8"
    		7,60011,6004,000 psi Concrete100UL Listed
    		92403A80200000492403A82200000
     
    back to top