We will reply to your message within an hour.
With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.
A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem.
A handle on the side of the carriage locks the carriage in place.
Create a self-aligning system that can be locked in place with these carriages and guide rails.
Use these carriages and guide rails in temperatures up to 300° F.
With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.
For applications with low clearance, these carriages protrude less than 5 mm above their rails.
Compensate for rail misalignment in low-clearance applications with these carriages and guide rails.
Mate with a T-slotted rail to add linear motion to your assembly.
Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.
Fasten loads on the side of these carriages and add linear motion to a T-slot assembly.
C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.
The square profile prevents loads from twisting and rotating.
A handle locks these carriages in place on curved paths, loops, and circuits in assembly stations and other repetitive processes.
Build loops, circuits, and curved paths in assembly stations and other repetitive processes.
Combine with a T-slotted rail to add linear motion to your assembly.
Use these slides in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drilling, fastening, assembly, and measuring.
A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".
Made with Frelon bearings, these slides have over four times the load capacity of standard positioning slides.