Vertical-Mount Slide-Bolt Latches

Filter by

Material

Mounting Position

System of Measurement

Bolt Diameter

Height

Projection

Width

Mounting Location

Finish

Bolt Thickness

Slide Bolt Type

Door Opening Direction

Color

Pull Type

Mounting Screw Size

Mounting Hole Diameter

Surface-Mount Strike Plate Width

Mounting Hole Style

Bolt Width

Appearance

Export Control Classification Number (ECCN)

REACH

Screw Size

DFARS Specialty Metals

Exempt

RoHS

Compliant

Not Compliant

Mounting Screw Length

58 Products

Long-Reach Slide-Bolt Latches


Bolt with C-Bracket	Bolt without Strike Plate	Bolt with Strike Plate

Mount bolts without a strike plate by drilling a hole to secure the bolt.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position. They are reversible for right- and left-hand mounting.

C-bracket—Use bolts with a C bracket as a template to drill a hole.

					Mortise-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Projection	Bolt Dia.	Wd.	Dp.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Zinc-Plated Steel—Dull



		12"	2"	1 3/8"	5/8"	2 3/4"	1 3/8"	Vertical	Yes	No. 12	3/8"	Straight	Nonlocking	0000000	000000


		18"	2"	1 3/8"	5/8"	2 3/4"	1 3/8"	Vertical	Yes	No. 12	3/8"	Straight	Nonlocking	0000000	00000
		24"	2"	1 3/8"	5/8"	2 3/4"	1 3/8"	Vertical	Yes	No. 12	3/8"	Straight	Nonlocking	0000000	00000


		Zinc-Plated Steel—Dull with C-bracket



				24"	3 1/4"	1 1/2"	5/8"	—	—	Vertical	No	No. 10	1/4"	Straight	Nonlocking	00000000	00000


				Black Powder-Coated Steel



						24"	2"	1 3/8"	1/2"	—	—	Vertical	Yes	No. 14	1/4"	Straight	Nonlocking	00000000	00000


						33"	2"	1 5/8"	1"	—	—	Vertical	Yes	No. 14	1/4"	Straight	Nonlocking	00000000	00000
						45"	2"	1 3/8"	3/4"	—	—	Vertical	Yes	No. 14	1/4"	Straight	Nonlocking	00000000	00000


						304 Stainless Steel—Polished



								12"	2"	1 3/8"	5/8"	2 3/4"	1 3/8"	Vertical	Yes	No. 12	1/4"	Straight	Nonlocking	0000000	00000


								18"	2"	1 3/8"	5/8"	2 3/4"	1 3/8"	Vertical	Yes	No. 12	1/4"	Straight	Nonlocking	0000000	00000
								24"	2"	1 3/8"	5/8"	2 3/4"	1 3/8"	Vertical	Yes	No. 12	1/4"	Straight	Nonlocking	0000000	00000


								Black Powder-Coated 304 Stainless Steel



										24"	2"	1 3/8"	5/8"	—	—	Vertical	Yes	No. 14	1/4"	Straight	Nonlocking	00000000	00000


										34"	2"	1 3/8"	5/8"	—	—	Vertical	Yes	No. 14	1/4"	Straight	Nonlocking	00000000	00000
										46"	2"	1 3/8"	5/8"	—	—	Vertical	Yes	No. 14	1/4"	Straight	Nonlocking	00000000	00000

Foot-Operated Slide-Bolt Latches

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

					Mortise-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Projection	Bolt Dia.	Wd.	Dp.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Zinc-Plated Steel—Dull



		4 15/16"	2 3/16"	1 9/16"	3/4"	2 1/4"	1 3/8"	Vertical	Yes	No. 8	3/16"	Straight	Nonlocking	000000	000000

Spring-Loaded Slide-Bolt Latches

Bolts are spring-loaded to stay latched until you activate the pull. All latches are reversible for right- and left-hand mounting.

With Knob Pull


With Knob Pull and Cap		Without Offset Bolt

					Bolt		Mounting			Mounting Hole			Without Offset Bolt
	Ht.	Wd.	Projection	For Door Opening Direction	Wd.	Thk.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Zinc-Plated Steel—Dull



		2"	1 1/2"	3/4"	Opens Away from You	9/16"	3/8"	Horizontal, Vertical	No	No. 10	3/16"	Straight	Nonlocking	00000000	000000


		2"	1 1/2"	3/4"	Opens Toward You	9/16"	3/8"	Horizontal, Vertical	No	No. 10	3/16"	Straight	Nonlocking	00000000	00000


		Zinc-Plated Steel—Dull with Black Vinyl Cap



				1 1/2"	1 1/4"	1"	Opens Toward You	3/8"	3/8"	Horizontal, Vertical	No	No. 8	11/64"	Straight	Nonlocking	0000000	00000


				2"	1 5/8"	1 1/4"	Opens Toward You	7/16"	7/16"	Horizontal, Vertical	No	No. 10	13/64"	Straight	Nonlocking	0000000	00000
				2 7/8"	2"	1 3/8"	Opens Toward You	1/2"	1/2"	Horizontal, Vertical	No	No. 10	17/64"	Straight	Nonlocking	0000000	00000


				304 Stainless Steel—Dull with Black Vinyl Cap



						1 1/2"	1 1/4"	1"	Opens Toward You	3/8"	3/8"	Horizontal, Vertical	No	No. 8	11/64"	Straight	Nonlocking	0000000	00000


						2 7/8"	2"	1 3/8"	Opens Toward You	1/2"	1/2"	Horizontal, Vertical	No	No. 10	17/64"	Straight	Nonlocking	0000000	00000


						304 Stainless Steel—Dull with Red Vinyl Cap



								2"	1 5/8"	1 1/4"	Opens Toward You	7/16"	7/16"	Horizontal, Vertical	No	No. 10	13/64"	Straight	Nonlocking	0000000	00000

With Hook Pull


	Without Offset Bolt	1/2" Bolt Offset

Latches with hook pull have bolts that can be rotated 180°, so they can be used with both push and pull doors.

With Offset Bolt—Choose those with an offset bolt to accommodate door offset, which is the space between the front of a door and the frame.

					Bolt		Mounting			Mounting Hole			Without Offset Bolt		With 1/2" Offset Bolt
	Ht.	Wd.	Projection	For Door Opening Direction	Wd.	Thk.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each		Each
Zinc-Plated Steel—Dull



		3 1/8"	2 1/8"	3/4"	Opens Away from You, Opens Toward You	3/4"	3/4"	Horizontal, Vertical	No	No. 8	1/4"	Straight	Nonlocking	0000000	000000	0000000	000000


		3 1/8"	2 1/8"	1 1/4"	Opens Away from You, Opens Toward You	3/4"	3/4"	Horizontal, Vertical	No	No. 8	1/4"	Straight	Nonlocking	0000000	00000	0000000	00000

Push-Button Release Slide-Bolt Latches

Push the knob to slide the bolt that secures these latches and then press the button to release the bolt. All are reversible for right- and left-hand mounting.

					Surface-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Projection	Bolt Dia.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
304 Stainless Steel—Dull



		1 7/16"	1 9/16"	5/8"	1/4"	1 7/16"	11/16"	Horizontal, Vertical	No	No. 3	1/8"	Straight	Nonlocking	000000	000000

Spring-Loaded Lift-and-Drop Barrel Slide-Bolt Latches

The spring-loaded bolt stays latched until you pull it back—slide the bolt and drop the knob into the notch to secure. These latches are reversible for right- and left-hand mounting.

					Surface-Mount Strike Plate		Mortise-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Projection	Bolt Dia.	Ht.	Wd.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
304 Stainless Steel—Dull



		15/16"	1 9/16"	9/16"	1/4"	15/16"	13/16"	1 5/16"	9/16"	Horizontal, Vertical	Yes	M2.6	9/64"	Countersunk	Nonlocking	0000000	000000


		15/16"	2 3/8"	9/16"	1/4"	15/16"	13/16"	1 5/16"	9/16"	Horizontal, Vertical	Yes	M2.6	9/64"	Countersunk	Nonlocking	0000000	00000
		1 5/16"	2 3/8"	13/16"	3/8"	1 5/16"	1"	1 11/16"	11/16"	Horizontal, Vertical	Yes	M3.5	1/8"	Countersunk	Nonlocking	0000000	00000
		1 5/16"	3 9/16"	13/16"	3/8"	1 5/16"	1"	1 11/16"	11/16"	Horizontal, Vertical	Yes	M3.5	1/8"	Countersunk	Nonlocking	0000000	00000

Tamper-Resistant Padlockable Slide-Bolt Latches


	Edge-Mount Strike Plate

The mounting screws on this padlockable latch are concealed to prevent tampering. The latch is reversible for right- and left-hand mounting.

				Bolt				Surface-Mount Strike Plate		Edge-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Projection	Wd.	Thk.	For Max. Padlock Shackle Dia.	Min. Padlock Vert. Shackle Clearance	Ht.	Wd.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Chrome-Plated Steel—Polished



		7/8"	6"	2 5/16"	3/4"	3/4"	7/16"	1 1/4"	7/8"	2 1/2"	1 3/8"	2 1/2"	Horizontal, Vertical	Yes	No. 8	1/4"	Countersunk	Padlockable	0000000	000000

Tamper-Resistant Lift-and-Drop Barrel Padlockable Slide-Bolt Latches

Image of Product. Front orientation. Contains Annotated. Slide-Bolt Latches. Tamper-Resistant Lift-and-Drop Barrel Padlockable Slide-Bolt Latches.

To prevent tampering, the mounting screws on these latches are concealed. Slide the bolt and drop the knob into the notch to secure. All latches are reversible for right- and left-hand mounting.

						Surface-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Projection	Bolt Dia.	For Max. Padlock Shackle Dia.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Black Powder-Coated Steel—Dull



		3/4"	1 3/16"	15/16"	9/16"	15/32"	11/16"	1 3/16"	Horizontal, Vertical	Yes	No. 8	1/4"	Countersunk	Padlockable	0000000	000000

Self-Aligning Slide-Bolt Latches


Nonlocking Black Zinc-Plated Steel	Padlockable Black Zinc-Plated Steel	Nonlocking Silver Zinc-Plated Steel

Padlockable Silver Zinc-Plated Steel	Nonlocking Stainless Steel

The strike has angled ends, so these latches can accept their bolt even when doors become misaligned. All latches are reversible for right- and left-hand mounting.

Zinc-Plated Steel—Zinc-plated steel latches should be used in mostly dry environments. The plating offers temporary rust protection, but once it wears away the steel will rust.

304 Stainless Steel—304 stainless steel latches will hold up in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals.

						Surface-Mount Strike Plate		Mounting
	Ht.	Wd.	Projection	Bolt Dia.	For Max. Padlock Shackle Dia.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Mounting Hole Style	Slide Bolt Type		Each
Black Zinc-Plated Steel—Dull



		1 1/2"	1 5/16"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	00000


		1 1/2"	1 13/16"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	0000
		1 1/2"	2 3/16"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	0000
		1 1/2"	3"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	0000
		1 7/8"	4 5/8"	1 1/8"	7/16"	9/32"	1 7/8"	1 1/2"	Horizontal, Vertical	Yes	M4	Countersunk	Padlockable	0000000	00000


		Silver Zinc-Plated Steel—Dull



				1 1/2"	1 5/16"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	0000


				1 1/2"	1 13/16"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	0000
				1 1/2"	2 3/16"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	0000
				1 1/2"	3"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	0000
				1 7/8"	4 5/8"	1 1/8"	7/16"	9/32"	1 7/8"	1 1/2"	Horizontal, Vertical	Yes	M4	Countersunk	Padlockable	0000000	00000


				304 Stainless Steel—Dull



						1 1/2"	2 3/16"	1"	5/16"	—	1 1/2"	1 1/4"	Horizontal, Vertical	Yes	M4	Countersunk	Nonlocking	0000000	00000

Tamper-Resistant Slide-Bolt Latches


Style A	Style B

The mounting screws on these latches are concealed to prevent tampering. All latches are reversible for right- and left-hand mounting.

					Bolt		Surface-Mount Strike Plate		Edge-Mount Strike Plate		Mortise-Mount Strike Plate		Mounting			Mounting Hole
	Style	Ht.	Wd.	Projection	Wd.	Thk.	Ht.	Wd.	Ht.	Wd.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Chrome-Plated Steel—Dull



		A	7/8"	8"	1 5/8"	7/8"	7/16"	1 1/2"	1"	—	—	3"	1"	Horizontal, Vertical	Yes	No. 12	1/4"	Countersunk	Nonlocking	0000000	000000


		Chrome-Plated Brass—Dull



				B	5/8"	3"	3/4"	1/2"	1/4"	—	—	1 1/4"	3/4"	1 1/2"	1/2"	Horizontal, Vertical	Yes	No. 6	3/16"	Countersunk	Nonlocking	00000000	00000


				B	5/8"	4"	3/4"	1/2"	1/4"	—	—	1 1/4"	3/4"	1 1/2"	1/2"	Horizontal, Vertical	Yes	No. 6	3/16"	Countersunk	Nonlocking	00000000	00000
				B	5/8"	6"	3/4"	1/2"	1/4"	—	—	1 1/4"	3/4"	1 1/2"	1/2"	Horizontal, Vertical	Yes	No. 6	3/16"	Countersunk	Nonlocking	00000000	00000


				Brass—Polished



						B	5/8"	3"	3/4"	1/2"	1/4"	—	—	1 1/4"	3/4"	1 1/2"	1/2"	Horizontal, Vertical	Yes	No. 6	3/16"	Countersunk	Nonlocking	00000000	00000


						B	5/8"	4"	3/4"	1/2"	1/4"	—	—	1 1/4"	3/4"	1 1/2"	1/2"	Horizontal, Vertical	Yes	No. 6	3/16"	Countersunk	Nonlocking	00000000	00000
						B	5/8"	6"	3/4"	1/2"	1/4"	—	—	1 1/4"	3/4"	1 1/2"	1/2"	Horizontal, Vertical	Yes	No. 6	3/16"	Countersunk	Nonlocking	00000000	00000

Chain-Grip Spring-Loaded Slide-Bolt Latches


Style A	Style B

Pull the chain-grip to unlatch hard-to-reach doors and panels. Bolts are spring-loaded to stay latched until you activate the pull. All latches have bolts that can be rotated 180°, so they can be used with both push and pull doors. They are reversible for right- and left-hand mounting.

					Bolt		Surface-Mount Strike Plate		Mortise-Mount Strike Plate		Mounting		Mounting Hole
	Style	Ht.	Wd.	Projection	Wd.	Thk.	Ht.	Wd.	Ht.	Wd.	Position	Fasteners Included	Dia.	Style	Includes		Each
Chrome-Plated Zinc



		A	4 15/16"	2 1/16"	1"	1/2"	1/2"	1"	2 7/8"	1 1/16"	2 1/8"	Horizontal, Vertical	Yes	3/16"	Straight	Clip for Pull Chain	000000	000000


		Beige Painted Iron



				B	9"	4 1/4"	2"	1 3/16"	1"	2 1/4"	4 5/8"	—	—	Horizontal, Vertical	Yes	7/16"	Straight	Clip for Pull Chain	0000000	000000

Tamper-Resistant Keyed Slide-Bolt Locks


	Mortise-Mount Strike Plate

The mounting screws are concealed to prevent tampering. Choose this lock if you need locks that each open with a different key. It can be locked in the open or closed position. It is reversible for right- and left-hand mounting.

				Bolt		Surface-Mount Strike Plate		Mortise-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Projection	Wd.	Thk.	Ht.	Wd.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Chrome-Plated Steel—Dull



		7/8"	8"	1 5/8"	7/8"	7/16"	1 1/2"	1"	3"	1"	Horizontal, Vertical	Yes	No. 8	1/4"	Countersunk	Keyed	0000000	000000

Tamper-Resistant Keyed Alike Slide-Bolt Locks


	Mortise-Mount Strike Plate

Choose this lock if you need several locks that open with the same key. The mounting screws are concealed to prevent tampering. Lock can be locked in the open or closed position. It is reversible for right- and left-hand mounting.

					Bolt		Surface-Mount Strike Plate		Mortise-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Key No.	Projection	Wd.	Thk.	Ht.	Wd.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Chrome-Plated Steel—Dull



		7/8"	8"	820	1 5/8"	7/8"	7/16"	1 1/2"	1"	3"	1"	Horizontal, Vertical	Yes	No. 8	1/4"	Countersunk	Keyed	0000000	000000

Spring-Loaded Padlockable Slide-Bolt Latches

Style A

The spring-loaded bolt stays latched until you pull it back. These padlockable latches are reversible for right- and left-hand mounting.

					Bolt			Surface-Mount Strike Plate		Edge-Mount Strike Plate		Mortise-Mount Strike Plate		Mounting			Mounting Hole
	Style	Ht.	Wd.	Projection	Wd.	Thk.	For Max. Padlock Shackle Dia.	Ht.	Wd.	Ht.	Wd.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia.	Style	Slide Bolt Type		Each
Zinc-Plated Steel—Dull



		A	2 1/8"	6 1/4"	15/16"	5/8"	1/2"	3/8"	2 3/16"	7/8"	1 1/2"	2 3/8"	2 3/16"	1 1/8"	Horizontal, Vertical	No	No. 18	5/16"	Countersunk	Padlockable	000000	000000

Open-Indicating Keyed Slide-Bolt Locks

A red indicator on the side of these locks is visible when they are open and hidden when they are locked. The lock is reversible for right- and left-hand mounting.

Replacement Keys—Replacement keys are sold separately.

	Locks																Replacement Keys
					Bolt		Surface-Mount Strike Plate		Mounting			Mounting Hole
	Ht.	Wd.	Key No.	Projection	Wd.	Thk.	Ht.	Wd.	Position	Fasteners Included	Screw Size	Dia., mm	Style	Slide Bolt Type		Each		Each
Black Nylon



		2 1/8"	1 9/16"	6951	1 1/4"	1/2"	1/8"	2 1/8"	11/16"	Horizontal, Vertical	No	M5	5.5	Straight	Keyed	0000000	000000	0000000	00000