About Push-to-Close Latches
More
About Cabinet Door and Drawer Locks
More
Keyed Alike Deadbolt Locks for Sliding Cabinet Doors
Choose these locks if you need several locks that open with the same key. Also known as push-bolt locks, they secure sliding doors, such as those found on display cases. Push in the cylinder to lock; use the key to unlock.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Strike Plate | Mounting | Mounting Holes | Replacement Keys | ||||||||||||||||
For Max. Thick. | Key Number | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Dia. | Dp. | Lock Cylinder Material | Fasteners Included | Screw Size | Screw Lg. | No. of | Dia. | Ctr.-to-Ctr. | Style | For Use On | Each | Each | ||
Brass—Dull | |||||||||||||||||||
7/8" | 4T362 | 7/8" | 7/16" | 7/16" | 7/16" | 1/2" | Brass | No | No. 6 | 5/8" | 2 | 3/16" | 1 3/8" | Countersunk | Wood | 0000000 | 000000 | 0000000 | 00000 |
1 1/8" | 107 | 15/16" | 7/16" | 1/2" | 3/8" | 7/16" | Brass | No | No. 6 | 5/8" | 2 | 3/16" | 1 3/8" | Straight | Wood | 0000000 | 00000 | 0000000 | 0000 |
1 3/8" | 915 | 15/16" | 7/16" | 1/2" | 3/8" | 7/16" | Brass | No | No. 6 | 5/8" | 2 | 3/16" | 1 3/8" | Straight | Wood | 0000000 | 00000 | 0000000 | 0000 |
Deadbolt Locks for Sliding Cabinet Doors
Choose these locks if you need locks that each open with a different key. Also known as push-bolt locks, they secure sliding doors, such as those found on display cases. Push in the cylinder to lock; use the key to unlock.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | Mounting Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | For Through Hole Dia. | Rear Projection | Latch Bolt Projection | Dia. | Dp. | Lock Cylinder Material | Fasteners Included | Screw Size | Screw Lg. | No. of | Dia. | Ctr.-to-Ctr. | Mounting Hole Style | For Use On | Each | |
Brass—Dull | ||||||||||||||||
1 1/8" | 15/16" | 7/16" | 1/2" | 3/8" | 7/16" | Brass | No | No. 6 | 5/8" | 2 | 3/16" | 1 3/8" | Straight | Wood | 0000000 | 000000 |
1 3/8" | 15/16" | 7/16" | 1/2" | 3/8" | 7/16" | Brass | No | No. 6 | 5/8" | 2 | 3/16" | 1 3/8" | Straight | Wood | 0000000 | 00000 |
Push-to-Close Latches with Edge-Pull Handle for Sliding Doors
Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open. Often used on T-slotted framing, they have a two-piece design.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Latching Distance | Lg. | Wd. | Projection | Latch Bolt Projection | Wd. | Ht. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Each | |
Black Powder-Coated Zinc | ||||||||||||
1/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 15/16" | 2 15/16" | 2 3/16" | No | M6 | 2 3/16" | 0000000 | 000000 |
Two-Way-Drive Push-to-Close Locks for Sliding Doors
Secure sliding doors on industrial cabinets and enclosure panels with a push. These locks are more convenient to use than cam and draw locks, since you don’t need to turn them to close. Open them with a two-way key (sold separately). Also called a double-bit key, this type matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or slotted driver. These locks also have a concealed design that prevents others from tampering with them using pliers.
Mount these locks to the back of your door. They require a through-hole in the front of your door to insert your key. To change how far they project into your enclosure, these locks include two mounting brackets with different depths. They don’t come with a catch, so you’ll need to cut a slot in your door frame or mount a stud.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Enclosure Keys | ||||||||||||||
For Max. Door Thick. | Door Mounting Location | Key Size | Max. Latching Distance | For Through Hole Dia. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Fasteners Included | Screw Size | Includes | Each | Each | ||
Through-Hole Mount | |||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||
1/8" | Left Side | 3 mm | 1" | 7/8" | 4 5/16" | 1 7/16" | 7/16", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 000000 | 0000000 | 00000 |
1/8" | Left Side | 5 mm | 1" | 7/8" | 4 5/16" | 1 7/16" | 7/16", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 00000 | 0000000 | 0000 |
1/8" | Right Side | 3 mm | 1" | 7/8" | 4 5/16" | 1 7/16" | 7/16", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 00000 | 0000000 | 0000 |
1/8" | Right Side | 5 mm | 1" | 7/8" | 4 5/16" | 1 7/16" | 7/16", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 00000 | 0000000 | 0000 |
Square-Drive Push-to-Close Locks for Sliding Doors
Quickly push to secure sliding doors on industrial cabinets and enclosure panels. These locks are more convenient to use than cam and draw locks, since you don’t need to turn them to close. They open with a square key, so they match a common keying system for industrial enclosures but are more secure than locks that open with a hex key or slotted driver. Their concealed design also stops others from tampering with them using pliers.
Mount these locks to the back of your door. They require a through-hole in the front of your door to insert your key. To change how far they project into your enclosure, these locks include two mounting brackets with different depths. They don’t come with a catch, so you’ll need to cut a slot in your door frame or mount a stud.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Enclosure Keys | ||||||||||||||
For Max. Door Thick. | Door Mounting Location | Square Size, mm | Max. Latching Distance | For Through Hole Dia | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Fasteners Included | Screw Size | Includes | Each | Each | ||
Through Hole Mount | |||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||
1/8" | Left Side | 8 | 1" | 7/8" | 4 5/16" | 1 7/16" | 1/2", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 000000 | 0000000 | 00000 |
1/8" | Right Side | 8 | 1" | 7/8" | 4 5/16" | 1 7/16" | 1/2", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 00000 | 0000000 | 0000 |
Keyed Push-to-Close Locks with Edge-Pull Handle for Sliding Doors
For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t. Compared to cam and draw locks, these locks are more convenient because they easily latch with a single push.
Choose keyed alike locks when you need several locks that open with the same key. Choose keyed differently locks when you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Latching Distance | Lg. | Wd. | Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Key No. | No. of Keys Included | For Use On | Each | |
Keyed Alike | |||||||||||||||
Black Powder-Coated Zinc | |||||||||||||||
5/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 2 15/16" | 15/16" | 2 3/16" | No | M6 | 2 3/16" | 1333 | 2 | Metal, Wood | 0000000 | 000000 |
Keyed Differently | |||||||||||||||
Black Powder-Coated Zinc | |||||||||||||||
5/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 2 15/16" | 15/16" | 2 3/16" | No | M6 | 2 3/16" | __ | 2 | Metal, Wood | 0000000 | 00000 |
Keyed Locks for Sliding Gates
In addition to sliding gates, this lock is for use on cantilever and fixed-roller gates. With a key-locking mechanism, it provides more security than other gate locks. Choose this lock if you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Strike Plate | |||||||||
---|---|---|---|---|---|---|---|---|---|
Material | For Through Hole Dia. | Ht. | Wd. | Ht. | Wd. | Mounting Fasteners Included | No. of Keys Included | Each | |
Through-Hole Mount | |||||||||
Gray Powder-Coated 300 Series Stainless Steel | 7/8" | 6 5/16" | 3 3/4" | 7 11/16" | 2 3/4" | Yes | 3 | 0000000 | 0000000 |