For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills.

Remove large amounts of material quickly without sacrificing tool life. Variable spacing between flutes reduces cutting time and vibration in high-volume jobs.

Also known as NC tolerance end mills, these carbide end mills have oversize mill diameter tolerances. They're sized to match standard high-speed steel end mills, so you can use them as longer-lasting replacements without changing the size of the cut.

A 45° corner chamfer improves cutting edge strength, so these end mills last longer than standard square end mills when milling hard material; however they do not create as sharp of a corner. Variable spacing between the flutes reduces vibration, allowing them to provide fast cuts, smooth finishes, and long tool life.

These end mills have an extended neck with a reduced diameter that prevents them from rubbing against your workpiece when deep milling. Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life on hard materials.

These end mills have a neck that’s extended and has a reduced diameter—this prevents them from rubbing against your workpiece when deep milling.

Cut into the sides and make slots in honeycomb panels without damaging any layers.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds. They are uncoated for use in soft material, such as aluminum, brass, and bronze.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life. They are uncoated for use in soft material, such as aluminum, brass, and bronze.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds without sacrificing tool life.

Variable spacing between the flutes reduces vibration for faster cuts, a smoother finish, and longer tool life.

Use these end mills for short runs and general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

A higher helix angle means these end mills clear more chips than other roughing cobalt steel end mills, making them better for milling aluminum, brass, and bronze. Serrations along the cutting edge act as chip breakers, so they can remove large amounts of material at high speeds.

With a mill diameter less than 1/8", these end mills are great for precise, detailed work such as in electronics, mold making, and medical-device manufacturing.

These end mills have either a neck or shank that’s extended and has a reduced diameter—this prevents them from rubbing against your workpiece when deep milling. Variable spacing between the flutes reduces vibration, allowing the end mills to provide fast cuts, smooth finishes, and long tool life on hard materials.

These end mills have an extended neck with a reduced diameter that prevents them from rubbing against your workpiece when deep milling. Also known as runner cutters, they cut channels with precise angles and dimensions, reducing the need for additional finishing.

These end mills have a diamond or diamondlike coating for machining abrasive material, such as carbon fiber, fiberglass, and graphite.

The 45° helix angle plus a titanium-carbonitride (TiCN) coating prevents soft material, such as aluminum, brass, and bronze, from accumulating on the cutting edge and creating an uneven finish.

When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel. When one end wears out, turn the tool around for a sharp edge.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

Use these end mills for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their angled profile allows chamfer, bevel, and other angled cuts.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life on hard materials.

Made of cobalt steel, these end mills have good heat and wear resistance, so they can run at high speeds in hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, chamfering, and spotting cuts.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life on hard materials.

For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills. Often used for slotting and pocketing cuts in mold and die making, these end mills have a 90° profile and rounded corners, which reduce flute breakage and chipping.

With a mill diameter of 3 mm or less, these end mills are great for precise, detailed work such as in electronics, mold making, and medical-device manufacturing.

These end mills have either a neck or shank that’s extended and has a reduced diameter—this prevents them from rubbing against your workpiece when deep milling. Variable spacing between the flutes reduces vibration, allowing the end mills to provide fast cuts, smooth finishes, and long tool life on hard materials.

Replicate the shape of complex parts with these end mills.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life. They have a high helix angle and a wear-resistant coating for excellent shearing and chip removal in stainless steel and titanium.

Made of carbide-tipped high-speed steel, these end mills provide a sharper, harder edge at high temperatures than plain high-speed steel.

Use these end mills for general purpose keyseat cutting in a wide range of material, including aluminum, iron, and steel. An alternating right- and left-hand tooth style allows them to remove more material at high speeds than standard keyseat cutters.

Made of solid carbide, these cutters are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

Create dovetail grooves that allow O-rings to flex without falling out of place.

With better heat and wear resistance than high-speed steel, these cobalt steel dovetail cutters run at higher speeds and provide better performance on hard material. Use them to create dovetail slots for connecting two components with a sliding fit.

These tools have a tapered profile and rounded cutting edge for making smooth contours on intricate, three-dimensional shapes. They're also known as taper degree end mills. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Also known as taper degree end mills, they're often used to machine angled slots in dies and molds.

A titanium-diboride (TiB2) coating reduces friction when working with nonferrous metals, so you can use these end mills to cut soft metals like aluminum, brass, and bronze. Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life.

With peripheral and side teeth, these saws remove chips for a consistent cutting width.

Made of solid carbide, these saws are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Use them for cutoff, slitting, and slotting applications.

For general purpose milling in most material, the end mills in these sets have one milling end and a standard shank.

Offering two times the life of a standard carbide end mill, the end mills in these sets have two milling ends so you can switch to the opposite end when one end wears out. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

These multifunction tools have a 90° pointed tip that allows them to be used for drilling as well as for slotting, profiling, and chamfering cuts.

Offering two times the life of a standard carbide end mill, the end mills in these sets have two milling ends so you can switch to the opposite end when one end wears out. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.