Open and close circuits in a snap. These switches actuate quickly to minimize arcing and prevent contacts from sticking. They’re often used to indicate that an appliance or enclosure door is open. You can also use them inside limit, pressure, and temperature switches.

Plastic Covers—Plastic covers (sold separately) are compatible with switches with screw terminals. They fit over the bottom of the switch to prevent contact with live terminals.

At least 25% smaller than our Miniature Snap-Acting Switches, these switches are often used to trigger actions from inside a vehicle’s door or an engine compartment. They open and close circuits faster than other switches, preventing contacts from sticking by reducing the time that they're near one another. They also minimize the chance of arcing, so electricity won’t jump across contacts.

Keep out dirt and moisture—the sealed housing on these switches is watertight and meet MIL-PRF-8805. They’re sized to fit in the tiniest of spaces. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

Open and close circuits in a snap—even in harsh conditions. With a rubber-encased housing and stainless steel bracket, these switches handle high vibrations and resist corrosion. They’re rated IP68 for protection from dust and temporary submersion. Because they open and close circuits faster than other switches—reducing the time that contacts are near one another—they prevent contacts from sticking. They also minimize the chance of arcing, so electricity won’t jump across contacts. They’re often used as door-open indicators on enclosures or as an internal component in limit, pressure, and temperature switches.

Built for tight spaces exposed to water, these switches have a housing that's less than 1" long and IP67 rated for protection from temporary submersion. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as internal components in limit, pressure, and temperature switches.

Sealed actuators prevent these switches from jamming, even when exposed to oil, sand, mud, or ice. They send a signal to your circuit when an object hits the actuator—for instance, a box on a conveyor runs into the switch, stopping the conveyor. They open and close circuits as fast as snap-acting switches, but they have a bigger actuator for large objects. To actuate, they require a push, similar to a button. Rated IP68, they’re protected against dust and temporary submersion.