Electronic Thickness Gauges
Find the thickness of sheet metal, paper, and other flat stock. All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 1/8" | 0.4" | Ceramic | Yes | Mitutoyo | 547-500S | 00000000 | 0000000 |
Electronic Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use them to measure the thickness of sheet metal, paper, and other flat stock. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 1/8" | 0.4" | Ceramic | Yes | Mitutoyo | 547-500S | 00000000 | 0000000 |
Electronic Thickness Gauges for Pipe and Tubing with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They measure the wall thickness of pipe, tubing, and other curved surfaces. Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. All have SPC data output to connect to a computer or data processor, but model 209-954 needs an SPC output adapter (sold separately) for SPC capabilities.
USB data cables (sold separately) connect gauges directly to your PC.
10-pin data cables (sold separately) connect gauges to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect gauges to your PC through 10-pin data cables.
Wireless data transmitters and receivers (sold separately) allow you to transmit measurement data from gauges to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Tip Shape | Spindle Tip Shape | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
With SPC Data Output | |||||||||||||||
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 3/4" | 0.14" | Steel | Round | Flat | Yes | Mitutoyo | 547-561S | 00000000 | 0000000 |
| 0"-1.97" | 0 mm-50 mm | ±0.002" | ±0.050 mm | 0.001" | 0.01 mm | 6 9/16" | 0.12" | Carbide | Ball | Ball | Yes | Mitutoyo | 209-954 | 0000000 | 00000000 |
| For Manufacturer Model Number | Each | |
| 209-954 | 0000000 | 0000000 |
| For Manufacturer Model Number | Cord Length | Each | |
| 547-561S, 209-954 | 40" | 0000000 | 0000000 |
| For Manufacturer Series | Includes | Each | |
| U-WAVE-T | USB Cable | 000000 | 0000000 |
Electronic Thickness Gauges for Pipe, Tubing,
and Flat Surfaces with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.4" | 0 mm-10 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.236" | Steel | Yes | Mitutoyo | 547-312A | 00000000 | 0000000 |
Electronic Thickness Gauges for Pipe, Tubing, and Flat Surfaces
A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.4" | 0 mm-10 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.236" | Steel | Yes | Mitutoyo | 547-312A | 00000000 | 0000000 |
Electronic Thickness Gauges for Grooves
Thin as a blade, the anvil on these gauges fits into grooves in flat surfaces where typical thickness gauges can’t reach. Use them in tight and difficult-to-measure spaces, such as grooves in V-belts, stair treads, and sheet metal.
The LCD display makes results easy to read. With the zero-set button, you can start measuring at any point. The zero-position memory, also known as absolute (ABS) positioning, retains the gauge’s measuring position when the scale is off. All have both internal data storage and an SPC data output. Connect them to a computer or data processor to analyze data and monitor measurements in real time.
USB data cables (sold separately) connect the gauge directly to your PC.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.25" | Steel | Yes | Mitutoyo | 547-316S | 0000000 | 0000000 |
Pocket Electronic Thickness Gauges
Small enough to fit between your thumb and index finger, use this gauge for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Pocket Electronic Thickness Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Small enough to fit between your thumb and index finger, use it for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Long-Reach Electronic Thickness Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. An extra-deep throat provides a long reach for measuring sheet metal and other large items. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 4 3/4" | 0.4" | Ceramic | Yes | Mitutoyo | 547-520S | 0000000 | 0000000 |
Long-Reach Electronic Thickness Gauges
An extra-deep throat provides a long reach for measuring sheet metal and other large items. This gauge has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 4 3/4" | 0.4" | Ceramic | Yes | Mitutoyo | 547-520S | 00000000 | 0000000 |
Dial Thickness Gauges
A loop handle allows you to comfortably hold these gauges while operating the thumb lever.
For technical drawings and 3-D models, click on a part number.
Anvil | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.05" | ±0.0002" | 0.0001" | 0.01" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7326A | 000000 | 0000000 |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7300A | 000000 | 000000 |
| 0"-1" | ±0.002" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7304A | 000000 | 000000 |
| 0mm-10mm | ±0.015 mm | 0.01mm | 1mm | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7301A | 000000 | 000000 |
Dial Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. A loop handle allows you to comfortably hold them while operating the thumb lever.
For technical drawings and 3-D models, click on a part number.
Anvil | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.05" | ±0.0002" | 0.0001" | 0.01" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7326A | 000000 | 0000000 |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7300A | 000000 | 000000 |
| 0"-1" | ±0.002" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7304A | 000000 | 000000 |
| 0mm-10mm | ±0.015 mm | 0.01mm | 1mm | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7301A | 0000000 | 000000 |
Economy Pocket Dial Thickness Gauges
Small enough to fit between your thumb and index finger, use these gauges for quick thickness checks on paper, film, and other flat stock. Operate by pulling the serrated finger slide to raise the spindle.
Anvil | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Each | |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1/2" | 0.23" | Steel | White | 00000000 | 000000 |
Starrett Pocket Dial Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They fit between your thumb and index finger for quick thickness checks on paper, film, and other flat stock. Operate by pulling the serrated finger slide to raise the spindle.
Outside Micrometers for Tolerance Checking
Confirm a part is within your set tolerance. Set your minimum and maximum tolerance to quickly check where your part falls. They have a plain thimble that turns freely without friction or a stopping device. These micrometers rely on operator feel for accurate measurements.
Mitutoyo 113 series micrometers are limit-style micrometers. Set one spindle at your minimum and the other at your maximum tolerance.
Mitutoyo 523 series micrometers have tolerance pointers on the dial gage, so you can set your minimum and maximum tolerance.
| Measuring Range | Accuracy | Measuring Increments | Throat Dp. | Frame Material | Environmental Rating | Features | Manufacturer Model Number | Each | |
Mitutoyo Micrometers | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Plain Thimble | |||||||||
| 0mm-25mm | ±0.003 mm | 0.01mm | 0.905" | Steel | __ | Tolerance-Checking Go/No-Go Operation, Vernier Scale | 113-102 | 0000000 | 0000000 |
| 25mm-50mm | ±0.003 mm | 0.01mm | 1.456" | Steel | __ | Tolerance-Checking Go/No-Go Operation, Vernier Scale | 113-103 | 0000000 | 000000 |
Mitutoyo Micrometers with Dial Display | |||||||||
Plain Thimble | |||||||||
| 0"-1" | ±0.00005" | 0.00005" | 0.984" | Steel | IP54 | Tolerance Pointers, Tolerance-Checking Go/No-Go Operation, Locknut | 523-131 | 0000000 | 000000 |
| 1"-2" | ±0.00005" | 0.00005" | 1.378" | Steel | IP54 | Tolerance Pointers, Tolerance-Checking Go/No-Go Operation, Locknut | 523-132 | 0000000 | 000000 |