Anchor Type Anchor Type |
|---|
 |  |
| Toggle | Toggle Eyebolt |
 |  |
| Female Threaded | Plug |
 | |
| Stud |
For Use In For Use In |
|---|
|
|
Toggle Material Toggle Material |
|---|
|
Pull-Out Strength Pull-Out Strength |
|---|
|
Shear Strength Shear Strength |
|---|
|
Usable Length Usable Length |
|---|
Drill Bit Decimal Size Equivalent Drill Bit DecimalSize Equivalent |
|---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Hex Head Screws and Bolts
More
High-Strength Toggle Anchors
These high-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed. To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall. Then, slide the cap up to the wall and snap off the straps. Next, position your fixture, insert a screw and tighten. For use with machine screws; minimum screw length is the wall and fixture thicknesses plus 1/2". Pull-out strength and shear strength values are 25% of the ultimate values.
Zinc-plated steel toggle anchors resist corrosion in wet environments.
18-8 stainless steel toggle anchors are chemical resistant and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size | Thread Pitch, mm | Usable Lg. Range | Wing Span | Drill Bit Size | Material | Color | Pull-Out | Shear | Tested In | Drive Style | Head Type | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel Toggle | |||||||||||||||
| 10-24 | __ | 3/8"-3 5/8" | 2" | 1/2" | Polystyrene Plastic | White | 200 | 200 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 10 | 000000000 | 000000 |
| 10-24 | __ | 3/8"-3 5/8" | 2" | 1/2" | Polystyrene Plastic | White | 200 | 200 | Hollow Concrete Block | Phillips, Slotted | Flat | Drywall, Hollow Block, Plaster, Wood Paneling | 10 | 000000000 | 00000 |
| 10-24 | __ | 3/8"-3 5/8" | 2" | 1/2" | Polystyrene Plastic | White | 200 | 200 | Hollow Concrete Block | Phillips, Slotted | Rounded | Drywall, Hollow Block, Plaster, Wood Paneling | 10 | 000000000 | 00000 |
| 10-24 | __ | 2"-9 1/2" | 2" | 1/2" | Polystyrene Plastic | White | 200 | 200 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 00000 |
| 1/4"-20 | __ | 3/8"-3 5/8" | 2" | 1/2" | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 10 | 000000000 | 00000 |
| 1/4"-20 | __ | 3/8"-3 5/8" | 2" | 1/2" | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | Phillips, Slotted | Flat | Drywall, Hollow Block, Plaster, Wood Paneling | 10 | 000000000 | 00000 |
| 1/4"-20 | __ | 3/8"-3 5/8" | 2" | 1/2" | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | Phillips, Slotted | Rounded | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 0000 |
| 1/4"-20 | __ | 2"-9 1/2" | 2" | 1/2" | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 00000 |
| 5/16"-18 | __ | 3/8"-2 1/2" | 2" | 3/4" | Polystyrene Plastic | White | 350 | 350 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 10 | 000000000 | 00000 |
| 3/8"-16 | __ | 3/8"-2 1/2" | 2" | 3/4" | Polystyrene Plastic | White | 400 | 400 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 00000 |
| 1/2"-13 | __ | 3/8"-2 1/2" | 2" | 3/4" | Polystyrene Plastic | White | 500 | 500 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 00000 |
| M5 | 0.8 | 10mm-92mm | 51mm | 13 mm | Polystyrene Plastic | White | 200 | 200 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 0000 |
| M6 | 1 | 10mm-92mm | 51mm | 13 mm | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 0000 |
| M8 | 1.25 | 10mm-64mm | 51mm | 19 mm | Polystyrene Plastic | White | 300 | 350 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 00000 |
| M10 | 1.5 | 10mm-64mm | 51mm | 19 mm | Polystyrene Plastic | White | 400 | 400 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 00000 |
18-8 Stainless Steel Toggle | |||||||||||||||
| 10-24 | __ | 3/8"-3 5/8" | 2" | 1/2" | Polystyrene Plastic | White | 200 | 200 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 1 | 000000000 | 0000 |
| 10-24 | __ | 2"-9 1/2" | 2" | 1/2" | Polystyrene Plastic | White | 200 | 200 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 1 | 000000000 | 0000 |
| 1/4"-20 | __ | 3/8"-3 5/8" | 2" | 1/2" | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 1 | 000000000 | 0000 |
| 1/4"-20 | __ | 2"-9 1/2" | 2" | 1/2" | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 1 | 000000000 | 0000 |
| 3/8"-16 | __ | 3/8"-2 1/2" | 2" | 3/4" | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 1 | 000000000 | 0000 |
| 1/2"-13 | __ | 3/8"-2 1/2" | 2" | 3/4" | Polystyrene Plastic | White | 500 | 500 | Hollow Concrete Block | __ | __ | Drywall, Hollow Block, Plaster, Wood Paneling | 1 | 000000000 | 0000 |
Rounded Head Toggle Bolts
A spring-loaded toggle holds against the back of the material. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. In denser materials such as high-strength concrete, use a drill bit that is 1/16" larger than the size listed.
Bolts are zinc-plated steel to resist corrosion in wet environments. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed. Extra toggles are sold separately.
For technical drawings and 3-D models, click on a part number.
Toggle Bolts | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Strength, lbs. | Head | Extra Toggles | |||||||||||||||
| Lg. | Usable Lg. | Size | Lg. | Wing Span | Drill Bit Size | Pull-Out | Shear | Tested In | Dia. | Ht. | Drive Style | For Use In | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Zinc-Plated Steel | ||||||||||||||||||
1/8" Dia. | ||||||||||||||||||
| 2" | 1 1/8" | 6-32 | 1 7/8" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.24" | 0.15" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | __ | 000000 | 00 |
| 3" | 2 1/8" | 6-32 | 2 7/8" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.24" | 0.15" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 0000 | __ | 000000 | 00 |
| 4" | 3 1/8" | 6-32 | 3 7/8" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.24" | 0.15" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | __ | 000000 | 00 |
3/16" Dia. | ||||||||||||||||||
| 2" | 7/8" | 10-24 | 1 7/8" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.33" | 0.13" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 000000 |
| 3" | 1 7/8" | 10-24 | 2 7/8" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.33" | 0.13" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 00000 |
| 4" | 2 7/8" | 10-24 | 3 7/8" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.33" | 0.13" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 00000 |
| 6" | 5" | 10-24 | 6" | 2" | 1/2" | 45 | 45 | 1/2" Drywall | 0.365" | 0.13" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 00000 |
1/4" Dia. | ||||||||||||||||||
| 3" | 1 7/8" | 1/4"-20 | 2 7/8" | 2 1/8" | 5/8" | 50 | 50 | 1/2" Drywall | 0.46" | 0.205" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 | 25 | 000000000 | 00000 |
| 4" | 2 7/8" | 1/4"-20 | 3 7/8" | 2 1/8" | 5/8" | 50 | 50 | 1/2" Drywall | 0.46" | 0.205" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 | 25 | 000000000 | 00000 |
5/16" Dia. | ||||||||||||||||||
| 3" | 1 1/2" | 5/16"-18 | 2 7/8" | 2 5/8" | 7/8" | 60 | 60 | 1/2" Drywall | 0.57" | 0.24" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 10 | 000000000 | 00000 |
| 4" | 2 1/2" | 5/16"-18 | 3 7/8" | 2" | 7/8" | 60 | 60 | 1/2" Drywall | 0.59" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 10 | 000000000 | 00000 |
3/8" Dia. | ||||||||||||||||||
| 3" | 1 3/8" | 3/8"-16 | 2 7/8" | 3" | 7/8" | 60 | 60 | 1/2" Drywall | 0.691" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 25 | 000000000 | 00000 |
| 4" | 2 5/8" | 3/8"-16 | 3 7/8" | 3" | 7/8" | 60 | 60 | 1/2" Drywall | 0.691" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 25 | 000000000 | 00000 |
| 5" | 3 3/8" | 3/8"-16 | 4 7/8" | 3" | 7/8" | 60 | 60 | 1/2" Drywall | 0.691" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 25 | 000000000 | 00000 |
| 6" | 4 3/8" | 3/8"-16 | 5 7/8" | 3" | 7/8" | 60 | 60 | 1/2" Drywall | 0.691" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 5 | 000000000 | 00000 | 25 | 000000000 | 00000 |
1/2" Dia. | ||||||||||||||||||
| 4" | 1 1/2" | 1/2"-13 | 3 7/8" | 4 3/4" | 1 1/4" | 75 | 75 | 1/2" Drywall | 0.785" | 0.36" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 5 | 000000000 | 00000 | 10 | 000000000 | 00000 |
| 6" | 3 1/2" | 1/2"-13 | 4 7/8" | 4 3/4" | 1 1/4" | 75 | 75 | 1/2" Drywall | 0.785" | 0.36" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 5 | 000000000 | 00000 | 10 | 000000000 | 00000 |
Toggles for Toggle Bolts
For technical drawings and 3-D models, click on a part number.
| For Screw Dia. | Wing Span | Thread Size | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||
|---|---|---|---|---|---|---|
| 3/16" | 2 1/8" | 10-24 | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 000000 |
| 1/4" | 2 1/8" | 1/4"-20 | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 |
| 5/16" | 2" | 5/16"-18 | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 |
| 3/8" | 3" | 3/8"-16 | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 |
| 1/2" | 4 3/4" | 1/2"-13 | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 |
Low-Profile Rounded Head Toggle Bolts
A shallow head makes these bolts good for low-clearance applications. The spring-loaded toggle holds against the back of the material. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. In denser materials such as high strength concrete, use a drill bit that is 1/16" larger than the size listed.
Bolts are zinc-plated steel to resist corrosion in wet environments. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed.
For technical drawings and 3-D models, click on a part number.
Thread | Strength, lbs. | Head | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Usable Lg. | Size | Lg. | Wing Span | Drill Bit Size | Pull-Out | Shear | Tested In | Dia. | Ht. | Drive Style | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||||
1/8" Dia. | |||||||||||||||
| 3" | 2 1/8" | 6-32 | 2 31/32" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.321" | 0.086" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 |
| 4" | 3 1/8" | 6-32 | 3 31/32" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.321" | 0.086" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 |
Flat Head Toggle Bolts
Bolts are beveled under the head for use in countersunk holes. A spring-loaded toggle holds against the back of the material. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. In denser materials such as high-strength concrete, use a drill bit that is 1/16" larger than the size listed.
Bolts are zinc-plated steel to resist corrosion in wet environments. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed. Extra toggles are sold separately.
For technical drawings and 3-D models, click on a part number.
Toggle Bolts | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Strength, lbs. | Head | Extra Toggles | |||||||||||||||
| Lg. | Usable Lg. | Size | Lg. | Wing Span | Drill Bit Size | Pull-Out | Shear | Tested In | Dia. | Ht. | Drive Style | For Use In | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Zinc-Plated Steel | ||||||||||||||||||
3/16" Dia. | ||||||||||||||||||
| 3" | 1 3/4" | 10-24 | 2 3/4" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.385" | 0.116" | Slotted | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 000000 | 50 | 000000000 | 000000 |
| 4" | 2 3/4" | 10-24 | 3 3/4" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.385" | 0.116" | Slotted | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 00000 |
1/4" Dia. | ||||||||||||||||||
| 3" | 1 5/8" | 1/4"-20 | 2 3/4" | 2 1/8" | 5/8" | 50 | 50 | 1/2" Drywall | 0.507" | 0.153" | Slotted | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 | 25 | 000000000 | 00000 |
Stud-Style Toggle Bolts
Use these stud-style anchors with nuts. A spring-loaded toggle holds against the back of the material. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. All are zinc-plated steel to resist corrosion in wet environments. Bolts are reusable, but the toggle will fall behind the wall when the bolt is removed.
For technical drawings and 3-D models, click on a part number.
Nylon Drilling Toggle Bolts
These toggle bolts speed installation by drilling their own pilot hole in 3/8"-5/8" thick drywall. To install, drive the anchor into the wall. Then, position your fixture and insert the bolt into the anchor. The toggle is drawn against the wall as you tighten the bolt. Once set, the anchor will remain secure if the bolt is removed.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Screw Lg. | Lg. | Wing Span | For Wall Thick. | Toggle Material | Pull-Out Strength, lbs. | Tested In | Dia. | Ht. | For Use In | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||||
| 6-32 | 2" | 1 3/8" | 1 3/4" | 3/8"-5/8" | Zinc Alloy | 25 | 1/2" Drywall | 0.68" | 0.05" | Drywall | 6 | 0000000 | 00000 |
| 6-32 | 3" | 1 3/8" | 1 3/4" | 3/8"-5/8" | Zinc Alloy | 25 | 1/2" Drywall | 0.68" | 0.05" | Drywall | 6 | 00000000 | 0000 |
| 10-24 | 2" | 1 5/8" | 2" | 3/8"-5/8" | Zinc Alloy | 30 | 1/2" Drywall | 3/4" | 0.05" | Drywall | 6 | 00000000 | 0000 |
| 1/4"-20 | 3" | 1 7/8" | 2 5/16" | 3/8"-5/8" | Zinc Alloy | 35 | 1/2" Drywall | 0.81" | 0.05" | Drywall | 4 | 00000000 | 00000 |
Zinc Alloy Drilling Toggle Bolts
These toggle bolts speed installation by drilling their own pilot hole in 3/8"- 5/8" thick drywall. To install, drive the anchor into the wall. Then, position your fixture and insert the bolt into the anchor. The toggle is drawn against the wall as you tighten the bolt. Once set, the anchor will remain secure if the bolt is removed.
For holes that are larger than the screw head, use toggle bolts with washer. Often used for anchoring or mounting into existing holes, they can be used in any application where you would need a separate washer.
For technical drawings and 3-D models, click on a part number.
Screw | Head | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Washer OD | Lg. | Wing Span | For Wall Thick. | Toggle Material | Pull-Out Strength, lbs. | Tested In | Dia. | Ht. | For Use In | Pkg. Qty. | Pkg. | |
Zinc Alloy | ||||||||||||||
| No. 8 | 2 1/8" | __ | 2 1/2" | 1 1/2" | 3/8"-5/8" | Zinc Alloy | 70 | 1/2" Drywall | 0.57" | 0.025" | Drywall | 10 | 00000000 | 000000 |
Zinc Alloy with Washer | ||||||||||||||
| No. 8 | 2 1/8" | 0.438" | 2 1/2" | 1 1/2" | 3/8"-5/8" | Zinc Alloy | 70 | 1/2" Drywall | __ | 0.1" | Drywall | 10 | 000000000 | 00000 |
Toggle Anchors for Sheet Metal and Wood Screws
These anchors fit a range of sheet metal and wood screw sizes since they form their own threads when installed. To install, fold the anchor in middle, insert into a hole, and tap flush. Thread a screw through your fixture and into the anchor. Extended length is the overall length of the anchor when folded in the middle.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | Extended Lg. | Drill Bit Size | For Wall Thickness | Color | Temperature Range, °F | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Polypropylene Plastic | ||||||||||||
| No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14 | 1 1/4" | 5/16" | 3/8"-1/2" | Off-White | -20° to 210° | 30 | Not Rated | 1/2" Drywall | Drywall, Plaster, Wood Paneling | 20 | 000000000 | 00000 |
| No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14 | 1 3/8" | 5/16" | 5/8"-3/4" | Off-White | -20° to 210° | 30 | Not Rated | 3/4" Drywall | Drywall, Plaster, Wood Paneling | 20 | 000000000 | 0000 |
| No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14 | 1 3/4" | 5/16" | 1" | Off-White | -20° to 210° | 30 | Not Rated | 1" Drywall | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 |
| No. 8, No. 9, No. 10, No. 12 | 3/4" | 5/16" | 1/8"-1/4" | Off-White | -20° to 210° | 30 | Not Rated | 1/4" Drywall | Drywall, Plaster, Wood Paneling | 20 | 000000000 | 0000 |
Female-Threaded Toggle Anchors for Hollow Block and Brick
A pivoting toggle bar creates a strong hold. These anchors provide an internally threaded socket connection for threaded rods and bolts. To install, push through a drilled hole; gravity drops the toggle into position. Anchors are removable and reusable. Made from zinc yellow-chromate plated steel, they resist corrosion in wet environments. Pull-out strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Thread | Strength, lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Dp. | Lg. | Usable Lg. | Wing Span | Drill Bit Size | Pull-Out | Shear | Tested In | For Use In | Each | |
Zinc Yellow-Chromate Plated Steel | |||||||||||
| 3/8"-16 | 1/2" | 2" | 1 1/2" | 2" | 1/2" | 800 | Not Rated | 1,500 psi Concrete | Concrete, Hollow Block, Hollow Brick | 000000000 | 000000 |
| 1/2"-13 | 11/16" | 2 1/4" | 1 5/8" | 2" | 5/8" | 1,400 | Not Rated | 1,500 psi Concrete | Concrete, Hollow Block, Hollow Brick | 000000000 | 00000 |
Stud-Style Anchors for Hollow Block and Brick
These stud-style anchors include a nut and a washer. To install, push through a drilled hole; gravity drops the toggle into position. Anchors are removable and reusable. Made from zinc yellow-chromate plated steel, they resist corrosion in wet environments. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Thread | Strength, lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Usable Lg. | Size | Lg. | Wing Span | Washer OD | Drill Bit Size | Pull-Out | Shear | Tested In | Thread Fit | For Use In | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate Plated Steel | ||||||||||||||
1/4" Dia. | ||||||||||||||
| 1 3/4" | 1" | 1/4"-20 | 5/8" | 1" | 0.625" | 5/16" | 170 | 370 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 00000 |
| 2 1/2" | 1 3/4" | 1/4"-20 | 1" | 1" | 0.625" | 5/16" | 170 | 370 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 0000 |
| 3 1/4" | 2 1/2" | 1/4"-20 | 1 7/8" | 1" | 0.625" | 5/16" | 170 | 370 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 0000 |
5/16" Dia. | ||||||||||||||
| 2 1/2" | 1 1/2" | 5/16"-18 | 1 1/8" | 1 1/4" | 0.688" | 5/16" | 220 | 570 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 0000 |
| 3 1/4" | 2 1/4" | 5/16"-18 | 1 3/4" | 1 1/4" | 0.688" | 5/16" | 220 | 570 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 00000 |
| 3 3/4" | 2 3/4" | 5/16"-18 | 1 5/8" | 1 1/4" | 0.688" | 5/16" | 220 | 570 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 00000 |
3/8" Dia. | ||||||||||||||
| 3 1/4" | 2" | 3/8"-16 | 1 7/8" | 1 1/2" | 0.813" | 3/8" | 250 | 750 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 00000 |
| 3 3/4" | 2 1/2" | 3/8"-16 | 1 5/8" | 1 1/2" | 0.813" | 3/8" | 250 | 750 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 00000 |
| 4" | 2 3/4" | 3/8"-16 | 1 7/8" | 1 1/2" | 0.813" | 3/8" | 250 | 750 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 2 | 000000000 | 0000 |
| 4 1/2" | 3 1/8" | 3/8"-16 | 3 1/4" | 1 1/2" | 0.813" | 3/8" | 250 | 750 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 4 | 000000000 | 00000 |
| 6" | 4 1/2" | 3/8"-16 | 3 1/2" | 1 1/2" | 0.813" | 3/8" | 450 | 750 | 1,500 psi Concrete | Class 2A | Concrete, Hollow Block, Hollow Brick | 1 | 000000000 | 0000 |
Toggle Bolt-Style Hangers with Spring
These hangers are a popular choice for overhead applications. The spring holds the washer and toggle against opposite sides of the wall, so everything's in position before you begin tightening. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Once tightened, the spring adds vibration resistance. Zinc yellow-chromate plating provides corrosion resistance in wet environments. Dimensions meet ASME B18.6.3 specifications.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Spacing | Max. Usable Lg. | For Hole Dia. | Eye Dia. | Wd. | Thick. | Ht. | For Use In | Specifications Met | Includes | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate Plated Steel | |||||||||||||||
| 1/4"-20 | 5" | Partially Threaded | Coarse | 2 1/4" | 3/4" | 1/4" | 3/8" | 3/32" | 15/16" | Drywall | ASME B18.6.3 | Spring, Toggle, Washer | 5 | 000000000 | 000000 |
Toggle Bolt-Style Hangers
These hangers are a popular choice for overhead applications. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. They’re zinc plated for corrosion resistance in wet environments. Dimensions meet ASME B18.6.3 specifications.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Spacing | Max. Usable Lg. | For Hole Dia. | Eye Dia. | Wd. | Thick. | Ht. | For Use In | Specifications Met | Includes | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||||
| 1/4"-20 | 4" | Partially Threaded | Coarse | 1 5/8" | 5/8" | 7/32" | 3/8" | 3/32" | 11/16" | Drywall, Plaster | ASME B18.6.3 | Nut, Toggle, Washer | 5 | 000000000 | 00000 |
| 1/4"-20 | 5" | Partially Threaded | Coarse | 2 1/2" | 5/8" | 7/32" | 3/8" | 3/32" | 11/16" | Drywall, Plaster | ASME B18.6.3 | Nut, Toggle, Washer | 5 | 000000000 | 00000 |
Toggle Bolt Anchor Assortments for Drywall, Plaster, and Wood Paneling
A wing-like toggle holds against the back of the material and spreads the force over a large area to hold 30 lbs. or more. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. Bolts are zinc-plated steel to resist corrosion in wet environments.
| Number of Pieces | Toggle Bolts Included | Container Type | Each | |
Zinc-Plated Steel | ||||
|---|---|---|---|---|
| 100 | 1/8" × 3" Lg. (25 Pieces) 1/8" × 4" Lg. (25 Pieces) 3/16" × 3" Lg. (15 Pieces) 3/16" × 4" Lg. (15 Pieces) 1/4" × 3" Lg. (10 Pieces) 1/4" × 4" Lg. (10 Pieces) | Plastic Box | 000000000 | 0000000 |