Turn sockets with a bit screwdriver.

Insulated to protect against accidental contact with live electrical circuits, these adapters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505 standards.

Convert from one square drive size to another.

Extend your socket's reach.

Push the square drive through the adapter to change size.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Lock your socket into these extensions to prevent accidental disengagement.

Reach a variety of spots with the confidence that your extension won’t disengage.

Tighten and loosen fasteners in hard-to-reach spots with a variety of extensions that lengthen the reach of your socket.

Convert your socket into a flex socket without worrying about the adapter falling off.

Change a standard wrench handle into a ratcheting wrench.

Fit these adapters between a wrench and socket to enable finger tightening.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Already set to a specific torque limit, these adapters audibly click and release when you reach that setting to prevent overtightening.

Attach one of these extensions to your impact socket to turn fasteners in hard-to-reach spaces.

Pull the collar to quickly attach and remove sockets.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Convert your impact socket into a flex socket to access fasteners from an angle.

Attach your square-drive impact socket to a spline-drive impact wrench.

Also known as positive-locking extensions, these extensions hold sockets place with a ball that only retracts when you pull the collar down. Designed to prevent accidental detachment, they lock to your socket more securely than other extensions.

Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.

Bend these extensions around obstructions to access hard-to-reach fasteners.

Pair the sockets in these sets with the bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt.

Suitable for occasional maintenance work, these sets are imported.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

When vertical space is tight or you need an extra twist on your socket, use one of the dual-drive Phillips bit sockets in this set.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

The short bit on these sockets fits in spaces where height clearance is limited.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Convert from one square drive size to another.

Pivot the head to access fasteners from an angle.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Carry fewer impact sockets—these five reversible impact sockets turn 10 fastener sizes. Flip the socket around to turn a different size.

These sockets fasten Torx screws often used in vehicles, bicycles, and electronics.

Extra-long bits help you access hard-to-reach fasteners.

The short bit on these sockets fits in spaces where height clearance is limited.

These sockets are also known as pin-in-Torx bits.

The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

An opening at the tip of these sockets fits around the security pin, allowing you to drive tamper-resistant Torx Plus screws.

The short bit on these sockets fits in spaces where height clearance is limited.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

Extra-long bits allow access to hard-to-reach fasteners.

Built to last, these wrenches have an enclosed steel head that seals lubrication in and dirt, dust, and moisture out to protect the ratchet mechanism. Since they’re air powered, these wrenches turn fasteners more quickly than handheld wrenches.

Turn sockets in the most confined spaces.

Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

No need to pull the socket off the tool—push a button to release.

When the ratchet head becomes worn or damaged, change it out for a new one.

Pair these wrenches with a bolt-through socket to reach nuts at the bottom of a long threaded rod or bolt which can pass through the head of the wrench.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

The shaft on these wrenches extends and locks.

The handle is covered in rubber for a comfortable grip.