Filter by
System of Measurement
Length
Material
Specifications Met
Fastener Head Type
Threading
Socket Head Profile
Military Specification
Finish
DFARS Specialty Metals
Tensile Strength
Thread Direction
REACH
Export Control Classification Number (ECCN)
Stainless Steel Socket Head Screws
 |
Fully Threaded |
 |
Partially Threaded |
These screws won't rust or corrode when exposed to moisture and chemicals. Their deep, six-point socket keeps hex keys from slipping out and damaging the drive.
Length is measured from under the head.
18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel screws can.
High-Temperature High-Strength A286 Stainless Steel—Often used to fasten parts in engines and turbines, these are our strongest stainless steel screws. They withstand higher temperatures than 18-8 stainless steel screws and resist corrosion from chemicals, such as bleach and chlorine. However, they won't hold up to salt water as well as 316 stainless steel screws.
Military Specification—Manufactured and tested to meet strict U.S. military standards for material and construction.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Threading | Thread Spacing | Tensile Strength, psi | Mil. Spec. | Pkg. Qty. | Pkg. | |||
18-8 Stainless Steel | |||||||||||
0-80 | |||||||||||
| 1/8" | 0.096" | 0.06" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-1, NAS1351C00-2, NASM16996 | 10 | 92200A052 | 00000 | ||
| 3/16" | 0.096" | 0.06" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-2, NAS1351C00-3, NASM16996 | 10 | 92200A054 | 0000 | ||
| 1/4" | 0.096" | 0.06" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-3, NAS1351C00-4, NASM16996 | 10 | 92200A055 | 0000 | ||
| 3/8" | 0.096" | 0.06" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-4, NAS1351C00-6, NASM16996 | 10 | 92200A057 | 0000 | ||
2-56 | |||||||||||
| 3/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-1, NAS1352C02-3, NASM16995 | 10 | 92200A076 | 0000 | ||
| 1/4" | 0.14" | 0.086" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-2, NAS1352C02-4, NASM16995 | 10 | 92200A077 | 0000 | ||
| 5/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, NAS1352C02-5 | 10 | 92200A723 | 0000 | ||
| 3/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-3, NAS1352C02-6, NASM16995 | 10 | 92200A079 | 0000 | ||
| 1/2" | 0.14" | 0.086" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-4, NAS1352C02-8, NASM16995 | 10 | 92200A081 | 0000 | ||
4-40 | |||||||||||
| 3/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, NAS1352C04-3 | 10 | 92200A724 | 0000 | ||
| 1/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-9, NAS1352C04-4, NASM16995 | 10 | 92200A106 | 0000 | ||
| 5/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, NAS1352C04-5 | 10 | 92200A725 | 0000 | ||
| 3/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-10, NAS1352C04-6, NASM16995 | 10 | 92200A108 | 0000 | ||
| 7/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, NAS1352C04-7 | 10 | 92200A726 | 0000 | ||
| 1/2" | 0.183" | 0.112" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-11, NAS1352C04-8, NASM16995 | 10 | 92200A110 | 0000 | ||
| 5/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-12, NAS1352C04-10, NASM16995 | 10 | 92200A111 | 0000 | ||
| 3/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-13, NAS1352C04-12, NASM16995 | 10 | 92200A112 | 0000 | ||
6-32 | |||||||||||
| 1/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-16, NAS1352C06-4, NASM16995 | 10 | 92200A144 | 0000 | ||
| 5/16" | 0.226" | 0.138" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, NAS1352C06-5, NASM16995 | 10 | 92200A727 | 0000 | ||
| 3/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-17, NAS1352C06-6, NASM16995 | 10 | 92200A146 | 0000 | ||
| 7/16" | 0.226" | 0.138" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, NAS1352C06-7, NASM16995 | 10 | 92200A728 | 0000 | ||
| 1/2" | 0.226" | 0.138" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-18, NAS1352C06-8, NASM16995 | 10 | 92200A148 | 0000 | ||
| 5/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-19, NAS1352C06-10, NASM16995 | 10 | 92200A150 | 0000 | ||
| 3/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-20, NAS1352C06-12, NASM16995 | 10 | 92200A151 | 0000 | ||
| 1" | 0.226" | 0.138" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-21, NAS1352C06-16, NASM16995 | 10 | 92200A152 | 0000 | ||
8-32 | |||||||||||
| 1/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, NAS1352C08-4 | 10 | 92200A729 | 0000 | ||
| 3/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-25, NAS1352C08-6, NASM16995 | 10 | 92200A192 | 0000 | ||
| 1/2" | 0.27" | 0.164" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-26, NAS1352C08-8, NASM16995 | 10 | 92200A194 | 0000 | ||
| 5/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-27, NAS1352C08-10, NASM16995 | 10 | 92200A196 | 0000 | ||
| 3/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-28, NAS1352C08-12, NASM16995 | 10 | 92200A197 | 0000 | ||
| 7/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-29, NAS1352C08-14, NASM16995 | 10 | 92200A198 | 0000 | ||
| 1" | 0.27" | 0.164" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-30, NAS1352C08-16, NASM16995 | 10 | 92200A199 | 0000 | ||
10-24 | |||||||||||
| 3/8" | 5/16" | 0.19" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-35, NAS1352C3-6, NASM16995 | 10 | 92200A240 | 0000 | ||
| 1/2" | 5/16" | 0.19" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-36, NAS1352C3-8, NASM16995 | 10 | 92200A242 | 0000 | ||
| 5/8" | 5/16" | 0.19" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-37, NAS1352C3-10, NASM16995 | 10 | 92200A244 | 0000 | ||
| 3/4" | 5/16" | 0.19" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-38, NAS1352C3-12, NASM16995 | 10 | 92200A245 | 0000 | ||
| 7/8" | 5/16" | 0.19" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-39, NAS1352C3-14, NASM16995 | 10 | 92200A246 | 0000 | ||
| 1" | 5/16" | 0.19" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-40, NAS1352C3-16, NASM16995 | 10 | 92200A247 | 0000 | ||
| 1 1/4" | 5/16" | 0.19" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-41, NAS1352C3-20, NASM16995 | 10 | 92200A249 | 0000 | ||
| 1 1/2" | 5/16" | 0.19" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-42, NAS1352C3-24, NASM16995 | 10 | 92200A251 | 0000 | ||
10-32 | |||||||||||
| 3/8" | 5/16" | 0.19" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-9, NAS1351C3-6, NASM16996 | 10 | 92200A340 | 0000 | ||
| 1/2" | 5/16" | 0.19" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-10, NAS1351C3-8, NASM16996 | 10 | 92200A342 | 0000 | ||
| 5/8" | 5/16" | 0.19" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-11, NAS1351C3-10, NASM16996 | 10 | 92200A344 | 0000 | ||
| 3/4" | 5/16" | 0.19" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-12, NAS1351C3-12, NASM16996 | 10 | 92200A345 | 0000 | ||
| 7/8" | 5/16" | 0.19" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-13, NAS1351C3-14, NASM16996 | 10 | 92200A346 | 0000 | ||
| 1" | 5/16" | 0.19" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-14, NAS1351C3-16, NASM16996 | 10 | 92200A347 | 0000 | ||
| 1 1/4" | 5/16" | 0.19" | Partially Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-15, NAS1351C3-20, NASM16996 | 10 | 92200A349 | 0000 | ||
| 1 1/2" | 5/16" | 0.19" | Partially Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-16, NAS1351C3-24, NASM16996 | 10 | 92200A351 | 0000 | ||
1/4"-20 | |||||||||||
| 3/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-47, NAS1352C4-6, NASM16995 | 5 | 92200A535 | 0000 | ||
| 1/2" | 3/8" | 1/4" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-48, NAS1352C4-8, NASM16995 | 5 | 92200A537 | 0000 | ||
| 5/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-49, NAS1352C4-10, NASM16995 | 5 | 92200A539 | 0000 | ||
| 3/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-50, NAS1352C4-12, NASM16995 | 5 | 92200A540 | 0000 | ||
| 7/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-51, NAS1352C4-14, NASM16995 | 5 | 92200A541 | 0000 | ||
| 1" | 3/8" | 1/4" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-52, NAS1352C4-16, NASM16995 | 5 | 92200A542 | 00000 | ||
| 1 1/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-53, NAS1352C4-20, NASM16995 | 5 | 92200A544 | 0000 | ||
| 1 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-54, NAS1352C4-24, NASM16995 | 5 | 92200A546 | 00000 | ||
| 1 3/4" | 3/8" | 1/4" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-55, NAS1352C4-28, NASM16995 | 5 | 92200A548 | 00000 | ||
| 2" | 3/8" | 1/4" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-56, NAS1352C4-32, NASM16995 | 5 | 92200A550 | 00000 | ||
1/4"-28 | |||||||||||
| 1/2" | 3/8" | 1/4" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-21, NAS1351C4-8, NASM16996 | 5 | 92200A580 | 00000 | ||
| 5/8" | 3/8" | 1/4" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-22, NAS1351C4-10, NASM16996 | 5 | 92200A582 | 00000 | ||
| 3/4" | 3/8" | 1/4" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-23, NAS1351C4-12, NASM16996 | 5 | 92200A584 | 00000 | ||
| 1" | 3/8" | 1/4" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-24, NAS1351C4-16, NASM16996 | 5 | 92200A586 | 00000 | ||
| 1 1/4" | 3/8" | 1/4" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-25, NAS1351C4-20, NASM16996 | 5 | 92200A588 | 00000 | ||
| 1 1/2" | 3/8" | 1/4" | Partially Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-26, NAS1351C4-24, NASM16996 | 5 | 92200A590 | 00000 | ||
5/16"-18 | |||||||||||
| 3/8" | 15/32" | 5/16" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-61, NAS1352C5-6, NASM16995 | 1 | 92200A620 | 0000 | ||
| 1/2" | 15/32" | 5/16" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-62, NAS1352C5-8, NASM16995 | 1 | 92200A622 | 0000 | ||
| 5/8" | 15/32" | 5/16" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-63, NAS1352C5-10, NASM16995 | 1 | 92200A624 | 0000 | ||
| 3/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-64, NAS1352C5-12, NASM16995 | 1 | 92200A626 | 0000 | ||
| 7/8" | 15/32" | 5/16" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-65, NAS1352C5-14, NASM16995 | 1 | 92200A628 | 0000 | ||
| 1" | 15/32" | 5/16" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-66, NAS1352C5-16, NASM16995 | 1 | 92200A630 | 0000 | ||
| 1 1/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-67, NAS1352C5-20, NASM16995 | 1 | 92200A632 | 0000 | ||
| 1 1/2" | 15/32" | 5/16" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-68, NAS1352C5-24, NASM16995 | 1 | 92200A634 | 0000 | ||
| 1 3/4" | 15/32" | 5/16" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-69, NAS1352C5-28, NASM16995 | 1 | 92200A636 | 0000 | ||
| 2" | 15/32" | 5/16" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-70, NAS1352C5-32, NASM16995 | 1 | 92200A638 | 00000 | ||
| 2 1/4" | 15/32" | 5/16" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-71, NAS1352C5-36, NASM16995 | 1 | 92200A640 | 00000 | ||
| 2 1/2" | 15/32" | 5/16" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-72, NAS1352C5-40, NASM16995 | 1 | 92200A642 | 00000 | ||
5/16"-24 | |||||||||||
| 3/4" | 15/32" | 5/16" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-31, NAS1351C5-12, NASM16996 | 1 | 92200A651 | 0000 | ||
| 1" | 15/32" | 5/16" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-32, NAS1351C5-16, NASM16996 | 1 | 92200A653 | 0000 | ||
| 1 1/4" | 15/32" | 5/16" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-33, NAS1351C5-20, NASM16996 | 1 | 92200A655 | 0000 | ||
| 1 1/2" | 15/32" | 5/16" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-34, NAS1351C5-24, NASM16996 | 1 | 92200A657 | 0000 | ||
3/8"-16 | |||||||||||
| 1/2" | 9/16" | 3/8" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-77, NAS1352C6-8, NASM16995 | 1 | 92200A672 | 0000 | ||
| 5/8" | 9/16" | 3/8" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-78, NAS1352C6-10, NASM16995 | 1 | 92200A674 | 0000 | ||
| 3/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-79, NAS1352C6-12, NASM16995 | 1 | 92200A676 | 0000 | ||
| 7/8" | 9/16" | 3/8" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-80, NAS1352C6-14, NASM16995 | 1 | 92200A678 | 0000 | ||
| 1" | 9/16" | 3/8" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-81, NAS1352C6-16, NASM16995 | 1 | 92200A680 | 0000 | ||
| 1 1/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-82, NAS1352C6-20, NASM16995 | 1 | 92200A682 | 0000 | ||
| 1 1/2" | 9/16" | 3/8" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-83, NAS1352C6-24, NASM16995 | 1 | 92200A684 | 00000 | ||
| 1 3/4" | 9/16" | 3/8" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-84, NAS1352C6-28, NASM16995 | 1 | 92200A686 | 00000 | ||
| 2" | 9/16" | 3/8" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-85, NAS1352C6-32, NASM16995 | 1 | 92200A690 | 00000 | ||
| 2 1/4" | 9/16" | 3/8" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-86, NAS1352C6-36, NASM16995 | 1 | 92200A692 | 00000 | ||
| 2 1/2" | 9/16" | 3/8" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-87, NAS1352C6-40, NASM16995 | 1 | 92200A694 | 00000 | ||
3/8"-24 | |||||||||||
| 3/4" | 9/16" | 3/8" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-39, NAS1351C6-12, NASM16996 | 1 | 92200A704 | 0000 | ||
| 1" | 9/16" | 3/8" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-40, NAS1351C6-16, NASM16996 | 1 | 92200A706 | 0000 | ||
| 1 1/4" | 9/16" | 3/8" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-41, NAS1351C6-20, NASM16996 | 1 | 92200A708 | 00000 | ||
| 1 1/2" | 9/16" | 3/8" | Fully Threaded | Fine | 80,000 | Fed. Spec. FF-S-86, MS16996-42, NAS1351C6-24, NASM16996 | 1 | 92200A709 | 0000 | ||
1/2"-13 | |||||||||||
| 3/4" | 3/4" | 1/2" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-92, NAS1352C8-12, NASM16995 | 1 | 92200A710 | 00000 | ||
| 1" | 3/4" | 1/2" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-94, NAS1352C8-16, NASM16995 | 1 | 92200A712 | 00000 | ||
| 1 1/4" | 3/4" | 1/2" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-95, NAS1352C8-20, NASM16995 | 1 | 92200A714 | 00000 | ||
| 1 1/2" | 3/4" | 1/2" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-96, NAS1352C8-24, NASM16995 | 1 | 92200A716 | 00000 | ||
| 2" | 3/4" | 1/2" | Fully Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-98, NAS1352C8-32, NASM16995 | 1 | 92200A718 | 00000 | ||
| 2 1/2" | 3/4" | 1/2" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-100, NAS1352C8-40, NASM16995 | 1 | 92200A720 | 00000 | ||
| 3" | 3/4" | 1/2" | Partially Threaded | Coarse | 80,000 | Fed. Spec. FF-S-86, MS16995-102, NAS1352C8-48, NASM16995 | 1 | 92200A722 | 00000 | ||
High-Temperature High-Strength A286 Stainless Steel | |||||||||||
0-80 | |||||||||||
| 1/8" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-2 | 1 | 92423A101 | 0000 | ||
| 1/8" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-2 | 100 | 92423A201 | 000000 | ||
| 3/16" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-3 | 1 | 92423A102 | 0000 | ||
| 3/16" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-3 | 100 | 92423A202 | 000000 | ||
| 1/4" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-4 | 1 | 92423A103 | 0000 | ||
| 1/4" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-4 | 100 | 92423A203 | 000000 | ||
| 5/16" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-5 | 1 | 92423A104 | 0000 | ||
| 5/16" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-5 | 100 | 92423A204 | 000000 | ||
| 3/8" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-6 | 1 | 92423A105 | 0000 | ||
| 3/8" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-6 | 100 | 92423A205 | 000000 | ||
| 1/2" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-8 | 1 | 92423A106 | 0000 | ||
| 1/2" | 0.096" | 0.06" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N00-8 | 100 | 92423A206 | 000000 | ||
2-56 | |||||||||||
| 1/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-2 | 1 | 92423A108 | 0000 | ||
| 1/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-2 | 100 | 92423A208 | 000000 | ||
| 3/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-3 | 1 | 92423A411 | 0000 | ||
| 3/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-3 | 100 | 92423A412 | 000000 | ||
| 1/4" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-4 | 1 | 92423A413 | 0000 | ||
| 1/4" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-4 | 100 | 92423A414 | 000000 | ||
| 5/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-5 | 1 | 92423A416 | 0000 | ||
| 5/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-5 | 100 | 92423A415 | 000000 | ||
| 3/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-6 | 1 | 92423A419 | 0000 | ||
| 3/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-6 | 100 | 92423A417 | 000000 | ||
| 1/2" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-8 | 1 | 92423A107 | 0000 | ||
| 1/2" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-8 | 100 | 92423A207 | 000000 | ||
| 5/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-10 | 1 | 92423A109 | 0000 | ||
| 5/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N02-10 | 100 | 92423A209 | 000000 | ||
| 3/4" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | NAS1352N02-12 | 1 | 92423A119 | 0000 | ||
| 3/4" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | NAS1352N02-12 | 50 | 92423A219 | 000000 | ||
| 1" | 0.14" | 0.086" | Partially Threaded | Coarse | 160,000 | NAS1352N02-16 | 1 | 92423A120 | 0000 | ||
| 1" | 0.14" | 0.086" | Partially Threaded | Coarse | 160,000 | NAS1352N02-16 | 50 | 92423A220 | 000000 | ||
4-40 | |||||||||||
| 1/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-2 | 1 | 92423A110 | 0000 | ||
| 1/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-2 | 100 | 92423A210 | 000000 | ||
| 3/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-3 | 1 | 92423A111 | 0000 | ||
| 3/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-3 | 100 | 92423A211 | 000000 | ||
| 1/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-4 | 1 | 92423A430 | 0000 | ||
| 1/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-4 | 100 | 92423A431 | 000000 | ||
| 5/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-5 | 1 | 92423A433 | 0000 | ||
| 5/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-5 | 100 | 92423A432 | 000000 | ||
| 3/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-6 | 1 | 92423A436 | 0000 | ||
| 3/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-6 | 100 | 92423A434 | 000000 | ||
| 1/2" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-8 | 1 | 92423A439 | 0000 | ||
| 1/2" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-8 | 100 | 92423A435 | 000000 | ||
| 5/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-10 | 1 | 92423A112 | 0000 | ||
| 5/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-10 | 100 | 92423A212 | 000000 | ||
| 3/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-12 | 1 | 92423A442 | 0000 | ||
| 3/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-12 | 100 | 92423A441 | 000000 | ||
| 1" | 0.183" | 0.112" | Partially Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-16 | 1 | 92423A113 | 0000 | ||
| 1" | 0.183" | 0.112" | Partially Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N04-16 | 100 | 92423A213 | 000000 | ||
6-32 | |||||||||||
| 1/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-4 | 1 | 92423A452 | 0000 | ||
| 1/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-4 | 100 | 92423A451 | 000000 | ||
| 5/16" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-5 | 1 | 92423A455 | 0000 | ||
| 5/16" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-5 | 100 | 92423A456 | 000000 | ||
| 3/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-6 | 1 | 92423A458 | 0000 | ||
| 3/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-6 | 100 | 92423A457 | 000000 | ||
| 1/2" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-8 | 1 | 92423A461 | 0000 | ||
| 1/2" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-8 | 100 | 92423A462 | 000000 | ||
| 5/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-10 | 1 | 92423A114 | 0000 | ||
| 5/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-10 | 100 | 92423A214 | 000000 | ||
| 3/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-12 | 1 | 92423A467 | 0000 | ||
| 3/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-12 | 100 | 92423A468 | 000000 | ||
| 1" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-16 | 1 | 92423A471 | 0000 | ||
| 1" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N06-16 | 100 | 92423A472 | 000000 | ||
8-32 | |||||||||||
| 1/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-4 | 1 | 92423A115 | 0000 | ||
| 1/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-4 | 100 | 92423A215 | 000000 | ||
| 5/16" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-5 | 1 | 92423A116 | 0000 | ||
| 5/16" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-5 | 100 | 92423A216 | 000000 | ||
| 3/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-6 | 1 | 92423A480 | 0000 | ||
| 3/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-6 | 100 | 92423A481 | 000000 | ||
| 1/2" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-8 | 1 | 92423A483 | 0000 | ||
| 1/2" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-8 | 100 | 92423A482 | 000000 | ||
| 5/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-10 | 1 | 92423A486 | 0000 | ||
| 5/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-10 | 100 | 92423A485 | 000000 | ||
| 3/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-12 | 1 | 92423A489 | 0000 | ||
| 3/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-12 | 100 | 92423A487 | 000000 | ||
| 1" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-16 | 1 | 92423A491 | 0000 | ||
| 1" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N08-16 | 100 | 92423A492 | 000000 | ||
| 1 1/4" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-20 | 1 | 92423A121 | 00000 | ||
| 1 1/4" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-20 | 25 | 92423A221 | 000000 | ||
| 1 3/4" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-28 | 1 | 92423A122 | 00000 | ||
| 1 3/4" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-28 | 25 | 92423A222 | 000000 | ||
| 2" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-32 | 1 | 92423A123 | 00000 | ||
| 2" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-32 | 25 | 92423A223 | 000000 | ||
| 3" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-48 | 1 | 92423A124 | 00000 | ||
| 3" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-48 | 25 | 92423A224 | 000000 | ||
| 4" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-64 | 1 | 92423A125 | 00000 | ||
| 4" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | NAS1352N08-64 | 25 | 92423A225 | 000000 | ||
10-32 | |||||||||||
| 3/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-6 | 1 | 92423A502 | 0000 | ||
| 3/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-6 | 100 | 92423A501 | 000000 | ||
| 1/2" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-8 | 1 | 92423A505 | 0000 | ||
| 1/2" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-8 | 100 | 92423A504 | 000000 | ||
| 5/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-10 | 1 | 92423A508 | 0000 | ||
| 5/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-10 | 100 | 92423A509 | 000000 | ||
| 3/4" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-12 | 1 | 92423A511 | 0000 | ||
| 3/4" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-12 | 100 | 92423A512 | 000000 | ||
| 7/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-14 | 1 | 92423A513 | 0000 | ||
| 7/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-14 | 100 | 92423A514 | 000000 | ||
| 1" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-16 | 1 | 92423A516 | 0000 | ||
| 1" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-16 | 100 | 92423A515 | 000000 | ||
| 1 1/4" | 5/16" | 0.19" | Partially Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-20 | 1 | 92423A519 | 0000 | ||
| 1 1/4" | 5/16" | 0.19" | Partially Threaded | Fine | 160,000 | Fed. Spec. FF-S-86, NAS1351N3-20 | 25 | 92423A518 | 000000 | ||
| 1 1/2" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-24 | 1 | 92423A126 | 00000 | ||
| 1 1/2" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-24 | 25 | 92423A226 | 000000 | ||
| 1 3/4" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-28 | 1 | 92423A127 | 00000 | ||
| 1 3/4" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-28 | 25 | 92423A227 | 000000 | ||
| 2" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-32 | 1 | 92423A128 | 00000 | ||
| 2" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-32 | 25 | 92423A228 | 000000 | ||
| 2 1/4" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-36 | 1 | 92423A129 | 0000 | ||
| 2 1/4" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-36 | 25 | 92423A229 | 000000 | ||
| 2 1/2" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-40 | 1 | 92423A130 | 00000 | ||
| 2 1/2" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-40 | 25 | 92423A230 | 000000 | ||
| 2 3/4" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-44 | 1 | 92423A131 | 00000 | ||
| 2 3/4" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-44 | 25 | 92423A231 | 000000 | ||
| 3" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-48 | 1 | 92423A132 | 00000 | ||
| 3" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-48 | 25 | 92423A232 | 000000 | ||
| 4" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-64 | 1 | 92423A133 | 00000 | ||
| 4" | 5/16" | 3/16" | Partially Threaded | Fine | 160,000 | NAS1351N3-64 | 25 | 92423A233 | 000000 | ||
1/4"-20 | |||||||||||
| 3/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-6 | 1 | 92423A117 | 0000 | ||
| 3/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-6 | 50 | 92423A217 | 000000 | ||
| 1/2" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-8 | 1 | 92423A531 | 0000 | ||
| 1/2" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-8 | 50 | 92423A532 | 000000 | ||
| 5/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-10 | 1 | 92423A533 | 0000 | ||
| 5/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-10 | 50 | 92423A534 | 000000 | ||
| 3/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-12 | 1 | 92423A536 | 0000 | ||
| 3/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-12 | 50 | 92423A535 | 000000 | ||
| 1" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-16 | 1 | 92423A539 | 0000 | ||
| 1" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-16 | 50 | 92423A538 | 000000 | ||
| 1 1/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-20 | 1 | 92423A543 | 00000 | ||
| 1 1/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N4-20 | 50 | 92423A542 | 000000 | ||
| 1 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-24 | 1 | 92423A134 | 0000 | ||
| 1 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-24 | 25 | 92423A234 | 000000 | ||
| 1 3/4" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-28 | 1 | 92423A135 | 0000 | ||
| 1 3/4" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-28 | 25 | 92423A235 | 000000 | ||
| 2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-32 | 1 | 92423A136 | 00000 | ||
| 2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-32 | 25 | 92423A236 | 000000 | ||
| 2 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-40 | 1 | 92423A137 | 00000 | ||
| 2 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-40 | 25 | 92423A237 | 000000 | ||
| 2 3/4" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-44 | 1 | 92423A138 | 00000 | ||
| 2 3/4" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-44 | 25 | 92423A238 | 000000 | ||
| 3" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-48 | 1 | 92423A139 | 00000 | ||
| 3" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-48 | 25 | 92423A239 | 000000 | ||
| 3 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-56 | 1 | 92423A140 | 00000 | ||
| 3 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-56 | 25 | 92423A240 | 000000 | ||
| 4" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-64 | 1 | 92423A141 | 00000 | ||
| 4" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-64 | 25 | 92423A241 | 000000 | ||
| 5" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-80 | 1 | 92423A142 | 00000 | ||
| 5" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-80 | 25 | 92423A242 | 000000 | ||
| 6" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-96 | 1 | 92423A143 | 00000 | ||
| 6" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | NAS1352N4-96 | 25 | 92423A243 | 000000 | ||
5/16"-18 | |||||||||||
| 1/2" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-8 | 1 | 92423A144 | 00000 | ||
| 1/2" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-8 | 25 | 92423A244 | 000000 | ||
| 3/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-12 | 1 | 92423A145 | 0000 | ||
| 3/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-12 | 25 | 92423A245 | 000000 | ||
| 1" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-16 | 1 | 92423A146 | 0000 | ||
| 1" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-16 | 25 | 92423A246 | 000000 | ||
| 1 1/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-20 | 1 | 92423A147 | 0000 | ||
| 1 1/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-20 | 25 | 92423A247 | 000000 | ||
| 1 1/2" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-24 | 1 | 92423A148 | 00000 | ||
| 1 1/2" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | NAS1352N5-24 | 25 | 92423A248 | 000000 | ||
| 2" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-32 | 1 | 92423A149 | 00000 | ||
| 2" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-32 | 25 | 92423A249 | 000000 | ||
| 2 1/4" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-36 | 1 | 92423A150 | 00000 | ||
| 2 1/4" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-36 | 25 | 92423A250 | 000000 | ||
| 2 3/4" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-44 | 1 | 92423A151 | 00000 | ||
| 2 3/4" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-44 | 25 | 92423A251 | 000000 | ||
| 4" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-64 | 1 | 92423A152 | 00000 | ||
| 4" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-64 | 25 | 92423A252 | 000000 | ||
| 5" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-80 | 1 | 92423A153 | 00000 | ||
| 5" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | NAS1352N5-80 | 25 | 92423A253 | 000000 | ||
3/8"-16 | |||||||||||
| 3/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | NAS1352N6-12 | 1 | 92423A156 | 00000 | ||
| 3/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | NAS1352N6-12 | 25 | 92423A256 | 000000 | ||
| 1" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N6-16 | 1 | 92423A573 | 00000 | ||
| 1" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N6-16 | 25 | 92423A572 | 000000 | ||
| 1 1/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | NAS1352N6-20 | 1 | 92423A157 | 00000 | ||
| 1 1/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | NAS1352N6-20 | 25 | 92423A257 | 000000 | ||
| 1 1/2" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N6-24 | 1 | 92423A577 | 00000 | ||
| 1 1/2" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N6-24 | 25 | 92423A578 | 000000 | ||
| 1 3/4" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-28 | 1 | 92423A158 | 00000 | ||
| 1 3/4" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-28 | 25 | 92423A258 | 000000 | ||
| 2" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N6-32 | 1 | 92423A118 | 00000 | ||
| 2" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | Fed. Spec. FF-S-86, NAS1352N6-32 | 25 | 92423A218 | 000000 | ||
| 3 1/2" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-56 | 1 | 92423A159 | 00000 | ||
| 3 1/2" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-56 | 25 | 92423A259 | 000000 | ||
| 4" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-64 | 1 | 92423A160 | 00000 | ||
| 4" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-64 | 25 | 92423A260 | 000000 | ||
| 5" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-80 | 1 | 92423A161 | 00000 | ||
| 5" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-80 | 25 | 92423A261 | 000000 | ||
| 6" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-96 | 1 | 92423A162 | 00000 | ||
| 6" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | NAS1352N6-96 | 25 | 92423A262 | 000000 | ||
Steel Socket Head Screws
 |
Fully Threaded |
 |
Partially Threaded |
Made of alloy steel, these screws are the standard for high-strength fastening. Use them in high-load applications such as dies, presses, and heavy equipment. The deep, six-point socket keeps the hex key from slipping out and damaging the drive.
Length is measured from under the head.
Cadmium-Plated Alloy Steel—The plating reduces friction between the screw and your mounting surface to prevent sticking when you tighten or loosen them. It also creates a barrier against rust.
Military Specification—Manufactured and tested to meet strict U.S. military standards for material and construction.
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Threading | Thread Spacing | Tensile Strength, psi | Mil. Spec. | Each | |||
Cadmium-Plated Alloy Steel | ||||||||||
2-56 | ||||||||||
| 3/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | MS16997-1, NAS1352-02-3P | 92562A111 | 00000 | ||
| 1/4" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | MS16997-2, NAS1352-02-4P | 92562A112 | 0000 | ||
| 3/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | MS16997-3, NAS1352-02-6P | 92562A113 | 0000 | ||
| 1/2" | 0.14" | 0.086" | Fully Threaded | Coarse | 160,000 | MS16997-4, NAS1352-02-8P | 92562A114 | 0000 | ||
4-40 | ||||||||||
| 1/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | MS16997-9, NAS1352-04-4P | 92562A115 | 0000 | ||
| 3/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | MS16997-10, NAS1352-04-6P | 92562A116 | 0000 | ||
| 1/2" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | MS16997-11, NAS1352-04-8P | 92562A117 | 0000 | ||
| 5/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | MS16997-12, NAS1352-04-10P | 92562A118 | 0000 | ||
| 3/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 160,000 | MS16997-13, NAS1352-04-12P | 92562A119 | 0000 | ||
| 1" | 0.183" | 0.112" | Partially Threaded | Coarse | 160,000 | NAS1352-04-16P | 92562A120 | 0000 | ||
6-32 | ||||||||||
| 1/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | MS16997-18, NAS1352-06-4P | 92562A207 | 0000 | ||
| 3/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | MS16997-19, NAS1352-06-6P | 92562A121 | 0000 | ||
| 1/2" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | MS16997-20, NAS1352-06-8P | 92562A212 | 0000 | ||
| 5/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | MS16997-21, NAS1352-06-10P | 92562A122 | 0000 | ||
| 3/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | MS16997-22, NAS1352-06-12P | 92562A214 | 0000 | ||
| 7/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | MS16997-23, NAS1352-06-14P | 92562A123 | 0000 | ||
| 1" | 0.226" | 0.138" | Fully Threaded | Coarse | 160,000 | MS16997-24, NAS1352-06-16P | 92562A216 | 0000 | ||
8-32 | ||||||||||
| 1/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | MS16997-30, NAS1352-08-4P | 92562A711 | 0000 | ||
| 3/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | MS16997-31, NAS1352-08-6P | 92562A124 | 0000 | ||
| 1/2" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | MS16997-32, NAS1352-08-8P | 92562A219 | 0000 | ||
| 5/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | MS16997-33, NAS1352-08-10P | 92562A125 | 0000 | ||
| 3/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | MS16997-34, NAS1352-08-12P | 92562A221 | 0000 | ||
| 7/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | MS16997-35, NAS1352-08-14P | 92562A126 | 0000 | ||
| 1" | 0.27" | 0.164" | Fully Threaded | Coarse | 160,000 | MS16997-36, NAS1352-08-16P | 92562A225 | 0000 | ||
| 1 1/4" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | MS16997-37, NAS1352-08-20P | 92562A227 | 0000 | ||
| 1 1/2" | 0.27" | 0.164" | Partially Threaded | Coarse | 160,000 | MS16997-38, NAS1352-08-24P | 92562A229 | 0000 | ||
10-24 | ||||||||||
| 3/8" | 5/16" | 0.19" | Fully Threaded | Coarse | 160,000 | MS16997-43, NAS1352-3-6P | 92562A127 | 0000 | ||
| 1/2" | 5/16" | 0.19" | Fully Threaded | Coarse | 160,000 | MS16997-44, NAS1352-3-8P | 92562A234 | 0000 | ||
| 5/8" | 5/16" | 0.19" | Fully Threaded | Coarse | 160,000 | MS16997-45, NAS1352-3-10P | 92562A128 | 0000 | ||
| 3/4" | 5/16" | 0.19" | Fully Threaded | Coarse | 160,000 | MS16997-46, NAS1352-3-12P | 92562A237 | 0000 | ||
| 7/8" | 5/16" | 0.19" | Fully Threaded | Coarse | 160,000 | MS16997-47, NAS1352-3-14P | 92562A129 | 0000 | ||
| 1" | 5/16" | 0.19" | Fully Threaded | Coarse | 160,000 | MS16997-48, NAS1352-3-16P | 92562A239 | 0000 | ||
| 1 1/4" | 5/16" | 0.19" | Partially Threaded | Coarse | 160,000 | MS16997-49, NAS1352-3-20P | 92562A242 | 0000 | ||
| 1 1/2" | 5/16" | 0.19" | Partially Threaded | Coarse | 160,000 | MS16997-50, NAS1352-3-24P | 92562A245 | 00000 | ||
| 1 3/4" | 5/16" | 0.19" | Partially Threaded | Coarse | 160,000 | MS16997-51, NAS1352-3-28P | 92562A247 | 0000 | ||
| 2" | 5/16" | 0.19" | Partially Threaded | Coarse | 160,000 | MS16997-52, NAS1352-3-32P | 92562A253 | 00000 | ||
10-32 | ||||||||||
| 3/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | MS16998-26, NAS1351-3-6P | 92562A130 | 0000 | ||
| 1/2" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | MS16998-27, NAS1351-3-8P | 92562A416 | 0000 | ||
| 5/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | MS16998-28, NAS1351-3-10P | 92562A131 | 0000 | ||
| 3/4" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | MS16998-29, NAS1351-3-12P | 92562A428 | 0000 | ||
| 7/8" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | MS16998-30, NAS1351-3-14P | 92562A132 | 0000 | ||
| 1" | 5/16" | 0.19" | Fully Threaded | Fine | 160,000 | MS16998-31, NAS1351-3-16P | 92562A434 | 0000 | ||
| 1 1/4" | 5/16" | 0.19" | Partially Threaded | Fine | 160,000 | MS16998-32, NAS1351-3-20P | 92562A133 | 0000 | ||
| 1 1/2" | 5/16" | 0.19" | Partially Threaded | Fine | 160,000 | MS16998-33, NAS1351-3-24P | 92562A134 | 0000 | ||
| 1 3/4" | 5/16" | 0.19" | Partially Threaded | Fine | 160,000 | MS16998-34, NAS1351-3-28P | 92562A135 | 0000 | ||
| 2" | 5/16" | 0.19" | Partially Threaded | Fine | 160,000 | MS16998-35, NAS1351-3-32P | 92562A136 | 0000 | ||
1/4"-20 | ||||||||||
| 3/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | MS16997-57, NAS1352-4-6P | 92562A712 | 0000 | ||
| 1/2" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | MS16997-58, NAS1352-4-8P | 92562A257 | 0000 | ||
| 5/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | MS16997-59, NAS1352-4-10P | 92562A137 | 0000 | ||
| 3/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | MS16997-60, NAS1352-4-12P | 92562A263 | 0000 | ||
| 7/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | MS16997-61, NAS1352-4-14P | 92562A138 | 0000 | ||
| 1" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | MS16997-62, NAS1352-4-16P | 92562A271 | 0000 | ||
| 1 1/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 160,000 | MS16997-63, NAS1352-4-20P | 92562A273 | 0000 | ||
| 1 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | MS16997-64, NAS1352-4-24P | 92562A276 | 0000 | ||
| 1 3/4" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | MS16997-65, NAS1352-4-28P | 92562A279 | 0000 | ||
| 2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | MS16997-66, NAS1352-4-32P | 92562A281 | 0000 | ||
| 2 1/4" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | MS16997-67, NAS1352-4-36P | 92562A139 | 00000 | ||
| 2 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 160,000 | MS16997-68, NAS1352-4-40P | 92562A140 | 00000 | ||
1/4"-28 | ||||||||||
| 1/2" | 3/8" | 1/4" | Fully Threaded | Fine | 160,000 | MS16998-41, NAS1351-4-8P | 92562A141 | 0000 | ||
| 5/8" | 3/8" | 1/4" | Fully Threaded | Fine | 160,000 | MS16998-42, NAS1351-4-10P | 92562A142 | 0000 | ||
| 3/4" | 3/8" | 1/4" | Fully Threaded | Fine | 160,000 | MS16998-43, NAS1351-4-12P | 92562A588 | 0000 | ||
| 7/8" | 3/8" | 1/4" | Fully Threaded | Fine | 160,000 | MS16998-44, NAS1351-4-14P | 92562A143 | 0000 | ||
| 1" | 3/8" | 1/4" | Fully Threaded | Fine | 160,000 | MS16998-45, NAS1351-4-16P | 92562A596 | 0000 | ||
| 1 1/4" | 3/8" | 1/4" | Fully Threaded | Fine | 160,000 | MS16998-46, NAS1351-4-20P | 92562A144 | 0000 | ||
| 1 1/2" | 3/8" | 1/4" | Partially Threaded | Fine | 160,000 | MS16998-47, NAS1351-4-24P | 92562A605 | 0000 | ||
| 1 3/4" | 3/8" | 1/4" | Partially Threaded | Fine | 160,000 | MS16998-48, NAS1351-4-28P | 92562A612 | 0000 | ||
| 2" | 3/8" | 1/4" | Partially Threaded | Fine | 160,000 | MS16998-49, NAS1351-4-32P | 92562A145 | 0000 | ||
| 2 1/4" | 3/8" | 1/4" | Partially Threaded | Fine | 160,000 | MS16998-50, NAS1351-4-36P | 92562A146 | 0000 | ||
5/16"-18 | ||||||||||
| 3/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | MS16997-78, NAS1352-5-12P | 92562A299 | 0000 | ||
| 7/8" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | MS16997-79, NAS1352-5-14P | 92562A147 | 0000 | ||
| 1" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | MS16997-80, NAS1352-5-16P | 92562A304 | 0000 | ||
| 1 1/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | MS16997-81, NAS1352-5-20P | 92562A306 | 0000 | ||
| 1 1/2" | 15/32" | 5/16" | Fully Threaded | Coarse | 160,000 | MS16997-82, NAS1352-5-24P | 92562A309 | 0000 | ||
| 1 3/4" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | MS16997-83, NAS1352-5-28P | 92562A312 | 00000 | ||
| 2" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | MS16997-84, NAS1352-5-32P | 92562A315 | 00000 | ||
| 2 1/2" | 15/32" | 5/16" | Partially Threaded | Coarse | 160,000 | MS16997-86, NAS1352-5-40P | 92562A148 | 00000 | ||
3/8"-16 | ||||||||||
| 1/2" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | MS16997-95, NAS1352-6-8P | 92562A149 | 00000 | ||
| 3/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | MS16997-97, NAS1352-6-12P | 92562A341 | 00000 | ||
| 1" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | MS16997-99, NAS1352-6-16P | 92562A346 | 0000 | ||
| 1 1/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | MS16997-100, NAS1352-6-20P | 92562A349 | 0000 | ||
| 1 1/2" | 9/16" | 3/8" | Fully Threaded | Coarse | 160,000 | MS16997-101, NAS1352-6-24P | 92562A352 | 0000 | ||
| 1 3/4" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | MS16997-102, NAS1352-6-28P | 92562A355 | 00000 | ||
| 2" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | MS16997-103, NAS1352-6-32P | 92562A358 | 00000 | ||
| 2 1/4" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | MS16997-104, NAS1352-6-36P | 92562A361 | 00000 | ||
| 2 1/2" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | MS16997-105, NAS1352-6-40P | 92562A364 | 00000 | ||
| 2 3/4" | 9/16" | 3/8" | Partially Threaded | Coarse | 160,000 | MS16997-106, NAS1352-6-44P | 92562A367 | 00000 | ||
Stainless Steel Hex-Drive Precision Shoulder Screws
 |
Our go-to choice for assemblies that require smooth, accurate movement. These screws are engineered for tight tolerances, with shoulder diameters twice as precise as those on standard-fit screws. They're made of stainless steel, so they won't rust, though they're not as strong as their alloy steel counterparts.
18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
Military Specification—These screws are manufactured and tested to strict U.S. military standards for material and construction.
Head | Certificate | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shoulder Lg. | Thread Size | Thread Lg. | Dia. | Ht. | Drive Size | Tensile Strength, psi | Mil. Spec. | Type | Form | 1-4 | 5-Up | |||
18-8 Stainless Steel | ||||||||||||||
1/8" Diameter Shoulder (-0.001" to 0" Tolerance) | ||||||||||||||
| 1/8" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 70,000 | MS51576-1, NASM51576 | Material Certificate | Digital | 94035A511 | 00000 | 00000 | ||
| 3/16" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 70,000 | MS51576-2, NASM51576 | Material Certificate | Digital | 94035A513 | 0000 | 0000 | ||
| 1/4" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 70,000 | MS51576-3, NASM51576 | — | — | 94035A515 | 0000 | 0000 | ||
| 5/16" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 70,000 | MS51576-4, NASM51576 | Material Certificate | Digital | 94035A517 | 0000 | 0000 | ||
| 3/8" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 70,000 | MS51576-5, NASM51576 | Material Certificate | Digital | 94035A519 | 0000 | 0000 | ||
3/16" Diameter Shoulder (-0.001" to 0" Tolerance) | ||||||||||||||
| 1/8" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-6, NASM51576 | Material Certificate | Digital | 94035A201 | 0000 | 0000 | ||
| 3/16" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-7, NASM51576 | — | — | 94035A202 | 0000 | 0000 | ||
| 1/4" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-8, NASM51576 | Material Certificate | Digital | 94035A203 | 0000 | 0000 | ||
| 5/16" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-9, NASM51576 | Material Certificate | Digital | 94035A200 | 0000 | 0000 | ||
| 3/8" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-10, NASM51576 | — | — | 94035A204 | 0000 | 0000 | ||
| 1/2" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-11, NASM51576 | Material Certificate | Digital | 94035A205 | 0000 | 0000 | ||
| 5/8" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-12, NASM51576 | Material Certificate | Digital | 94035A206 | 0000 | 0000 | ||
| 3/4" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-13, NASM51576 | Material Certificate | Digital | 94035A207 | 0000 | 0000 | ||
| 1" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-14, NASM51576 | Material Certificate | Digital | 94035A208 | 0000 | 0000 | ||
| 1 1/4" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 70,000 | MS51576-15, NASM51576 | — | — | 94035A209 | 0000 | 0000 | ||
1/4" Diameter Shoulder (-0.001" to 0" Tolerance) | ||||||||||||||
| 3/16" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-16, NASM51576 | Material Certificate | Digital | 94035A533 | 0000 | 0000 | ||
| 1/4" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-17, NASM51576 | Material Certificate | Digital | 94035A534 | 0000 | 0000 | ||
| 5/16" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-18, NASM51576 | — | — | 94035A532 | 0000 | 0000 | ||
| 3/8" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-19, NASM51576 | — | — | 94035A535 | 0000 | 0000 | ||
| 1/2" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-20, NASM51576 | Material Certificate | Digital | 94035A537 | 0000 | 0000 | ||
| 5/8" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-21, NASM51576 | Material Certificate | Digital | 94035A539 | 0000 | 0000 | ||
| 3/4" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-22, NASM51576 | Material Certificate | Digital | 94035A540 | 0000 | 0000 | ||
| 1" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-23, NASM51576 | Material Certificate | Digital | 94035A542 | 0000 | 0000 | ||
| 1 1/4" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-24, NASM51576 | Material Certificate | Digital | 94035A544 | 0000 | 0000 | ||
| 1 1/2" | 10-32 | 1/4" | 3/8" | 3/16" | 1/8" | 70,000 | MS51576-25, NASM51576 | Material Certificate | Digital | 94035A546 | 0000 | 0000 | ||
5/16" Diameter Shoulder (-0.001" to 0" Tolerance) | ||||||||||||||
| 1/2" | 1/4"-20 | 7/16" | 1/2" | 7/32" | 5/32" | 70,000 | MS51576-26, NASM51576 | — | — | 94035A304 | 0000 | 0000 | ||
| 5/8" | 1/4"-20 | 7/16" | 1/2" | 7/32" | 5/32" | 70,000 | MS51576-27, NASM51576 | Material Certificate | Digital | 94035A305 | 0000 | 0000 | ||
| 3/4" | 1/4"-20 | 7/16" | 1/2" | 7/32" | 5/32" | 70,000 | MS51576-28, NASM51576 | Material Certificate | Digital | 94035A306 | 0000 | 0000 | ||
3/8" Diameter Shoulder (-0.001" to 0" Tolerance) | ||||||||||||||
| 5/8" | 5/16"-18 | 1/2" | 9/16" | 1/4" | 3/16" | 70,000 | MS51576-32, NASM51576 | Material Certificate | Digital | 94035A404 | 0000 | 0000 | ||
1/2" Diameter Shoulder (-0.001" to 0" Tolerance) | ||||||||||||||
| 5/8" | 3/8"-16 | 5/8" | 3/4" | 5/16" | 1/4" | 70,000 | MS51576-37, NASM51576 | Material Certificate | Digital | 94035A502 | 0000 | 0000 | ||
| 3/4" | 3/8"-16 | 5/8" | 3/4" | 5/16" | 1/4" | 70,000 | MS51576-38, NASM51576 | Material Certificate | Digital | 94035A503 | 0000 | 0000 | ||
| 1" | 3/8"-16 | 5/8" | 3/4" | 5/16" | 1/4" | 70,000 | MS51576-39, NASM51576 | Material Certificate | Digital | 94035A504 | 00000 | 0000 | ||
 |
Shoulder Shortening |
 |
Shoulder Shortening | ||||||
|---|---|---|---|---|---|---|
Thk. | For Screw Size | Pkg. Qty. | Pkg. | |||
18-8 Stainless Steel | ||||||
For 1/8" Diameter Shoulder | ||||||
| 0.005" | No. 4 | 10 | 94773A606 | 00000 | ||
| 0.01" | No. 4 | 10 | 94773A647 | 0000 | ||
| 0.016" | No. 4 | 10 | 94773A679 | 0000 | ||
| 0.02" | No. 4 | 10 | 94773A706 | 0000 | ||
| 0.03" | No. 4 | 10 | 94773A737 | 0000 | ||
| 0.06" | No. 4 | 5 | 94773A766 | 0000 | ||
For 3/16" Diameter Shoulder | ||||||
| 0.005" | No. 8 | 10 | 94773A608 | 0000 | ||
| 0.01" | No. 8 | 10 | 94773A649 | 0000 | ||
| 0.016" | No. 8 | 10 | 94773A681 | 0000 | ||
| 0.02" | No. 8 | 10 | 94773A708 | 0000 | ||
| 0.03" | No. 8 | 10 | 94773A739 | 0000 | ||
| 0.06" | No. 8 | 5 | 94773A768 | 0000 | ||
For 1/4" Diameter Shoulder | ||||||
| 0.005" | No. 10 | 50 | 94773A610 | 0000 | ||
| 0.01" | No. 10 | 100 | 94773A651 | 00000 | ||
| 0.016" | No. 10 | 50 | 94773A683 | 00000 | ||
| 0.02" | No. 10 | 50 | 94773A710 | 00000 | ||
| 0.03" | No. 10 | 50 | 94773A741 | 00000 | ||
| 0.06" | No. 10 | 25 | 94773A770 | 0000 | ||
For 5/16" Diameter Shoulder | ||||||
| 0.005" | 1/4" | 50 | 94773A612 | 0000 | ||
| 0.01" | 1/4" | 25 | 94773A653 | 0000 | ||
| 0.016" | 1/4" | 25 | 94773A686 | 0000 | ||
| 0.02" | 1/4" | 25 | 94773A712 | 0000 | ||
| 0.03" | 1/4" | 100 | 94773A743 | 00000 | ||
| 0.06" | 1/4" | 25 | 94773A772 | 0000 | ||
For 3/8" Diameter Shoulder | ||||||
| 0.005" | 5/16" | 25 | 94773A614 | 0000 | ||
| 0.01" | 5/16" | 25 | 94773A655 | 00000 | ||
| 0.016" | 5/16" | 25 | 94773A688 | 00000 | ||
| 0.02" | 5/16" | 25 | 94773A714 | 0000 | ||
| 0.03" | 5/16" | 50 | 94773A745 | 00000 | ||
| 0.06" | 5/16" | 25 | 94773A774 | 0000 | ||
For 1/2" Diameter Shoulder | ||||||
| 0.005" | 3/8" | 25 | 94773A616 | 0000 | ||
| 0.01" | 3/8" | 25 | 94773A657 | 00000 | ||
| 0.016" | 3/8" | 25 | 94773A689 | 00000 | ||
| 0.02" | 3/8" | 25 | 94773A716 | 00000 | ||
| 0.03" | 3/8" | 50 | 94773A747 | 00000 | ||
| 0.06" | 3/8" | 25 | 94773A776 | 0000 | ||
Stainless Steel Slotted Precision Shoulder Screws
 |
Use these slotted screws in assemblies that require smooth, accurate movement. They're engineered for tight tolerances, with shoulder diameters twice as precise as those on standard-fit screws. They're made of stainless steel, so they won't rust. Hand-tighten with a slotted screwdriver to avoid damaging the drive.
18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
Military Specification—These screws are manufactured and tested to strict U.S. military standards for material and construction.
Head | Certificate | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shoulder Lg. | Thread Size | Thread Lg. | Dia. | Ht. | Tensile Strength, psi | Mil. Spec. | Type | Form | 1-4 | 5-Up | |||
18-8 Stainless Steel | |||||||||||||
1/8" Diameter Shoulder (-0.001" to 0" Tolerance) | |||||||||||||
| 1/8" | 4-40 | 5/32" | 1/4" | 1/8" | 70,000 | MS51575-1, NASM51575 | — | — | 91829A511 | 00000 | 00000 | ||
| 3/16" | 4-40 | 5/32" | 1/4" | 1/8" | 70,000 | MS51575-2, NASM51575 | — | — | 91829A513 | 0000 | 0000 | ||
| 1/4" | 4-40 | 5/32" | 1/4" | 1/8" | 70,000 | MS51575-3, NASM51575 | — | — | 91829A515 | 0000 | 0000 | ||
| 5/16" | 4-40 | 5/32" | 1/4" | 1/8" | 70,000 | MS51575-4, NASM51575 | — | — | 91829A517 | 0000 | 0000 | ||
| 3/8" | 4-40 | 5/32" | 1/4" | 1/8" | 70,000 | MS51575-5, NASM51575 | — | — | 91829A519 | 0000 | 0000 | ||
3/16" Diameter Shoulder (-0.001" to 0" Tolerance) | |||||||||||||
| 1/8" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-6, NASM51575 | — | — | 91829A201 | 0000 | 0000 | ||
| 3/16" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-7, NASM51575 | — | — | 91829A202 | 0000 | 0000 | ||
| 1/4" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-8, NASM51575 | — | — | 91829A203 | 0000 | 0000 | ||
| 5/16" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-9, NASM51575 | — | — | 91829A200 | 0000 | 0000 | ||
| 3/8" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-10, NASM51575 | — | — | 91829A204 | 0000 | 0000 | ||
| 1/2" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-11, NASM51575 | — | — | 91829A205 | 0000 | 0000 | ||
| 5/8" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-12, NASM51575 | Material Certificate | Digital | 91829A206 | 0000 | 0000 | ||
| 3/4" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-13, NASM51575 | — | — | 91829A207 | 0000 | 0000 | ||
| 1" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-14, NASM51575 | — | — | 91829A208 | 0000 | 0000 | ||
| 1 1/4" | 8-32 | 3/16" | 5/16" | 5/32" | 70,000 | MS51575-15, NASM51575 | — | — | 91829A209 | 0000 | 0000 | ||
1/4" Diameter Shoulder (-0.001" to 0" Tolerance) | |||||||||||||
| 1/8" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-16, NASM51575 | Material Certificate | Digital | 91829A531 | 0000 | 0000 | ||
| 3/16" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-17, NASM51575 | — | — | 91829A533 | 0000 | 0000 | ||
| 1/4" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-18, NASM51575 | — | — | 91829A534 | 0000 | 0000 | ||
| 5/16" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-19, NASM51575 | — | — | 91829A532 | 0000 | 0000 | ||
| 3/8" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-20, NASM51575 | — | — | 91829A535 | 0000 | 0000 | ||
| 1/2" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-21, NASM51575 | — | — | 91829A537 | 0000 | 0000 | ||
| 5/8" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-22, NASM51575 | — | — | 91829A539 | 0000 | 0000 | ||
| 3/4" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-23, NASM51575 | — | — | 91829A540 | 0000 | 0000 | ||
| 1" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-24, NASM51575 | — | — | 91829A542 | 0000 | 0000 | ||
| 1 1/4" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-25, NASM51575 | — | — | 91829A544 | 0000 | 0000 | ||
| 1 1/2" | 10-32 | 1/4" | 3/8" | 3/16" | 70,000 | MS51575-26, NASM51575 | — | — | 91829A546 | 0000 | 0000 | ||
5/16" Diameter Shoulder (-0.001" to 0" Tolerance) | |||||||||||||
| 1/4" | 1/4"-20 | 7/16" | 1/2" | 7/32" | 70,000 | MS51575-27, NASM51575 | — | — | 91829A301 | 0000 | 0000 | ||
| 5/16" | 1/4"-20 | 7/16" | 1/2" | 7/32" | 70,000 | MS51575-28, NASM51575 | — | — | 91829A302 | 0000 | 0000 | ||
1/2" Diameter Shoulder (-0.001" to 0" Tolerance) | |||||||||||||
| 1/2" | 3/8"-16 | 5/8" | 3/4" | 5/16" | 70,000 | MS51575-29, NASM51575 | — | — | 91829A501 | 00000 | 0000 | ||
| 5/8" | 3/8"-16 | 5/8" | 3/4" | 5/16" | 70,000 | NASM51575 | — | — | 91829A502 | 00000 | 0000 | ||
| 3/4" | 3/8"-16 | 5/8" | 3/4" | 5/16" | 70,000 | NASM51575 | — | — | 91829A503 | 00000 | 0000 | ||
| 1" | 3/8"-16 | 5/8" | 3/4" | 5/16" | 70,000 | NASM51575 | — | — | 91829A504 | 00000 | 00000 | ||
|
Shoulder Shortening |
|
Shoulder Shortening | ||||||
|---|---|---|---|---|---|---|
Thk. | For Screw Size | Pkg. Qty. | Pkg. | |||
18-8 Stainless Steel | ||||||
For 1/8" Diameter Shoulder | ||||||
| 0.005" | No. 4 | 10 | 94773A606 | 00000 | ||
| 0.01" | No. 4 | 10 | 94773A647 | 0000 | ||
| 0.016" | No. 4 | 10 | 94773A679 | 0000 | ||
| 0.02" | No. 4 | 10 | 94773A706 | 0000 | ||
| 0.03" | No. 4 | 10 | 94773A737 | 0000 | ||
| 0.06" | No. 4 | 5 | 94773A766 | 0000 | ||
For 3/16" Diameter Shoulder | ||||||
| 0.005" | No. 8 | 10 | 94773A608 | 0000 | ||
| 0.01" | No. 8 | 10 | 94773A649 | 0000 | ||
| 0.016" | No. 8 | 10 | 94773A681 | 0000 | ||
| 0.02" | No. 8 | 10 | 94773A708 | 0000 | ||
| 0.03" | No. 8 | 10 | 94773A739 | 0000 | ||
| 0.06" | No. 8 | 5 | 94773A768 | 0000 | ||
For 1/4" Diameter Shoulder | ||||||
| 0.005" | No. 10 | 50 | 94773A610 | 0000 | ||
| 0.01" | No. 10 | 100 | 94773A651 | 00000 | ||
| 0.016" | No. 10 | 50 | 94773A683 | 00000 | ||
| 0.02" | No. 10 | 50 | 94773A710 | 00000 | ||
| 0.03" | No. 10 | 50 | 94773A741 | 00000 | ||
| 0.06" | No. 10 | 25 | 94773A770 | 0000 | ||
For 5/16" Diameter Shoulder | ||||||
| 0.005" | 1/4" | 50 | 94773A612 | 0000 | ||
| 0.01" | 1/4" | 25 | 94773A653 | 0000 | ||
| 0.016" | 1/4" | 25 | 94773A686 | 0000 | ||
| 0.02" | 1/4" | 25 | 94773A712 | 0000 | ||
| 0.03" | 1/4" | 100 | 94773A743 | 00000 | ||
| 0.06" | 1/4" | 25 | 94773A772 | 0000 | ||
For 1/2" Diameter Shoulder | ||||||
| 0.005" | 3/8" | 25 | 94773A616 | 0000 | ||
| 0.01" | 3/8" | 25 | 94773A657 | 00000 | ||
| 0.016" | 3/8" | 25 | 94773A689 | 00000 | ||
| 0.02" | 3/8" | 25 | 94773A716 | 00000 | ||
| 0.03" | 3/8" | 50 | 94773A747 | 00000 | ||
| 0.06" | 3/8" | 25 | 94773A776 | 0000 | ||
