Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Hold fasteners securely in place as you drive them.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Quickly position these sockets on square and external 8-point fasteners.

Grip the indentations around the outside of tri-groove fasteners.

These sockets fit the nuts found on water and gas valves.

Tighten and loosen fasteners with an external Torx drive.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Grip more of your fastener head with these wrench heads.

A magnet holds the fastener securely enough to drive self-tapping screws.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Pivot the head to access fasteners from an angle.

The 12-point shape quickly positions on hex fasteners.

Quickly position these sockets on square fasteners.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Turn 5-point tamper-resistant nuts and bolts often found on water and gas valves.

Extra-long bits help you access hard-to-reach fasteners.

These sockets fasten Torx screws often used in vehicles, bicycles, and electronics.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

With twice as many corners, 8-point sockets grab onto square-drive screws and nuts more quickly than 4-point sockets.

The short bit on these sockets fits in spaces where height clearance is limited.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Grip more of your fastener head with these wrench heads.

Tighten or loosen nuts and bolts without damaging the finish.

Carry fewer impact sockets—these five reversible impact sockets turn 10 fastener sizes. Flip the socket around to turn a different size.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Pivot the head to access fasteners from an angle.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

The hole in the middle of these bits fits the security pin in tamper-resistant Torx screws.

Push the square drive through the adapter to change size.

Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Extend your socket's reach.

Safely extend your reach in areas where you could accidentally come into contact with live circuits.

Reach a variety of spots with the confidence that your extension won’t disengage.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Convert your socket into a flex socket to access fasteners from an angle.

Convert your socket into a flex socket without worrying about the adapter falling off.

Already set to a specific torque limit, these adapters audibly click and release when you reach that setting to prevent overtightening.

Fit these adapters between a wrench and socket to enable finger tightening.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

A magnet holds the socket, making changes quicker.

Attach to your socket for a longer reach.

Attach one of these extensions to your impact socket to turn fasteners in hard-to-reach spaces.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Reach a variety of spots by keeping common extension lengths on hand.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.

Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.

When you’re working up high, keep these wrenches secure at your side. Hook their tether ring to a carabiner or lanyard (not included), so they won’t fall to the ground if dropped.

Sealed against dust, dirt, and moisture, these wrenches can be used in greasy machine shops and dusty construction sites.

No need to pull the socket off the tool—push a button to release.

Extend the length of these wrenches for more reach—the shaft locks into place at set increments. When it’s time to change your socket, release it with the push of a button.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Pivot the head on these wrenches to access fasteners in tight spots.

Sealed with a gasket to keep lubrication in and debris out, these wrenches can be used in dusty environments. The head pivots, so you can access fasteners in tight places.

Prevent overtightening fasteners—you’ll feel the resistance from the fastener in your fingers, so you'll know when to stop. Also known as thumbwheel ratchets.

A ratcheting head on these wrench handles means there’s no need to reposition them when breaking stuck fasteners free. They’re also known as breaker bars.

Break stuck fasteners loose without causing sparks. Made of aluminum-bronze, these wrench handles meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Position the head anywhere along the handle.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Measure with an accuracy of ±2%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Measure with an accuracy of ±7%.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

Loosen stubborn fasteners—these wrenches operate at full torque counterclockwise to break stuck bolts free.

Switch between sockets and bits with these two-in-one tools to drive different types of fasteners with high force. Their versatility makes them ideal for use in the field for construction work and maintenance on heavy equipment.