We will reply to your message within an hour.
Pivot the head to access fasteners from an angle.
Quickly position these sockets on square and external 8-point fasteners.
Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.
Grip the indentations around the outside of tri-groove fasteners.
The short bit on these sockets fits in spaces where height clearance is limited.
Extra-long bits allow access to hard-to-reach fasteners.
The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.
These sockets are also known as pin-in-Torx bits.
These sockets are also known as Robertson bits.
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
Achieve the best possible grip on hex fasteners and prevent rounding.
A magnet holds the fastener securely enough to drive self-tapping screws.
The hex shape grips hex fasteners and prevents rounding.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
Suitable for occasional maintenance work, these sets are imported.
For high quality at a lower price, choose these U.S.A.-made sets.
With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
Convert from one square drive size to another.
Attach to your socket for a longer reach.
Lock your socket into the extension to prevent accidental disengagement..
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
These sockets are made to withstand the high torque and force of impact tools.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Extend your socket's reach.
The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.
Bend these extensions around obstructions to turn hard-to-reach fasteners.
Lock your socket into the extension to prevent accidental disengagement.
Turn sockets with a bit screwdriver.
Fit these adapters between your wrench and socket to enable finger tightening.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
Use sockets with tools that accept hex shanks, such as impact drivers and power drills.
A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.
No need to pull the socket off the tool—push a button to release.
A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.
Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.
Pivot the head to access fasteners in tight spots.
Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.
Turn sockets in the most confined spaces.
Pivot the head for access to fasteners in tight spots.
Position the head anywhere along the handle.
Turn sockets from above when there's not room to swing a standard wrench handle.
The ratcheting mechanism turns sockets quickly.
Bend around obstructions to turn hard-to-reach fasteners.
Fasten quickly with these crank-style handles.
Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.
When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.
Measure with an accuracy of ±2%.
Trust the precision of your measurements—these wrenches are accurate to ±1%.
The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.
A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.
Measure with an accuracy of ±7%.
Trust the precision of your measurements—these wrenches are accurate to ±2%.
These tools are suitable for general shop, maintenance, and automotive work.
Use these tools for general shop applications.
Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.
Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.
The rail is smooth plastic so the clips move more easily than on steel-rail organizers.
Move the sliding clips to any position along the rail to hold a variety of sockets.
Hold different square drive sizes on the four clip rails stored in these trays.
The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.
Store sockets on posts marked with the size.
Magnets hold sockets securely in place.
Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.
Attach these adapters to square-drive tools.
Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.
Designed to withstand high torque and force, these adapters fit the square drive on impact wrenches. Use with hex-shank bits (also known as insert bits).
Choose a handle based on torque and change shafts to use a different size or drive style. Factory-set screwdrivers ensure you reach the same torque every time.
Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.
Attach a socket to the 1/4" square drive tip to turn hex nuts and hex head screws. When set torque is reached, these drivers signal with an audible click.