Filter by
Station Type
Wattage
Manufacturer
Manufacturer Series
Tip Shape
Manufacturer Model Number
Iron Wattage
Power Source
Airflow
Approximate Heat-Up Time
Cord Length
Duty Cycle
Electrical Connection
Fitting Connection
For Nozzle Manufacturer Series
Maximum Temperature
Maximum Vacuum
Minimum Temperature
REACH
RoHS
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Number of Blades
Number of Channels
Point ID
Multichannel Soldering and Desoldering Stations
Switch between different soldering and desoldering tools quickly—these stations have either two or three channels to plug in multiple tools so they're ready to go. You can adjust the temperature for the best results. To protect sensitive components, they don’t create ESD (electrostatic discharge). Additional tips and nozzles are sold separately.
Choose a station that’s compatible with your soldering or desoldering iron. Each station includes a variety of tools to solder, desolder, or both—determine if the included tools work for your application.
Add different shaped and sized tips depending on the components you're soldering. The smaller the point width, the smaller the solder joint. For example, use a tip with a point width of 1/64” for soldering extra-small electronics under a microscope. For heavy duty soldering and large components, a tip with a point width of 1/8” works better.
Weller WR2 Series Stations
Chisel Tip
Display
Weller WR2 stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station. WR2000VX stations have a built-in vacuum for desoldering and a built-in air pump for hot air applications.
Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber.
Tip/Nozzle (Plug Connection) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Channels | Station Type | Iron Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. (Point ID) | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WR2000VX | |||||||||||
120V AC | |||||||||||
| 2 | Soldering Desoldering | 80W 80W | 150° to 990° | 250W | Chisel __ | 3/32" 3/32" (3/64") | Continuous | 60 sec. | One Tip One Nozzle One Soldering Iron One Desoldering Iron Two Sponges Two Scouring Scrubbers One Soldering Iron Stand One Desoldering Iron Stand | 4869N26 | 000000000 |
Weller Soldering Irons
Chisel Tip
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Tip Shape | Point Wd. | Tip Connection Type | For Tip Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WR2, WR3M, WT1, WT1H, WT2M | WP65 | 65W | 150° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Plastic | 24V AC | One Tip | 7724A115 | 0000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WP80 | 80W | 150° to 850° | Chisel | 3/32" | Plug | LT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 7724A527 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WSP80 | 80W | 200° to 840° | Chisel | 1/16" | Plug | LT | Continuous | 45 sec. | Rubber | 24V AC | One Tip | 7734A34 | 000000 |
| WR2, WR3M, WT1H, WT2M | WP120 | 120W | 150° to 845° | Chisel | 1/16" | Plug | XT | Continuous | 14 sec. | Rubber | 24V AC | One Tip | 7734A36 | 000000 |
| WR2, WT1H, WT2M | WP200 | 200W | 360° to 850° | Chisel | 13/64" | Plug | XHT | Continuous | 45 sec. | Plastic | 24V AC | One Tip | 7734A37 | 000000 |
Weller Desoldering Irons
Point | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Wd. | ID | Nozzle Connection Type | For Nozzle Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WR2, WR3M | DXV 80 | 80W | 150° to 850° | 1/8" | 5/64" | Plug | DX | Continuous | 65 sec. | Rubber | 24V AC | One Nozzle | 7327N12 | 0000000 |
Replacement Stands
For Iron | |||||
|---|---|---|---|---|---|
| Manufacturer Model Number | For Iron Wattage | Manufacturer Model Number | Includes | Each | |
| DXV80 | 200W | WDH 40 | One Scouring Scrubber | 4869N24 | 0000000 |
| WP65, WP80, WP120 | 65W, 80W, 120W | WDH 10T | One Scouring Scrubber | 4869N25 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | WDH 10 | One Scouring Scrubber | 7724A461 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | WSR 201 | One Sponge One Scouring Scrubber | 7724A768 | 000000 |
| WP200 | 200W | WSR 202 | One Sponge One Scouring Scrubber | 7724A15 | 000000 |
Weller LT Series Tips
Conical
Round
30° Round
Bevel
Gullwing
Knife
45° Knife
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP80, WSP80 | 1L | Conical | 850° | 1 1/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A128 | 00000 |
| WP80, WSP80 | 1SA | Round | 850° | 19/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A142 | 00000 |
| WP80, WSP80 | 1SLX | 30° Round | 850° | 55/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A134 | 00000 |
| WP80, WSP80 | 22CP | Bevel | 850° | 25/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A129 | 0000 |
| WP80, WSP80 | 33CP | Bevel | 850° | 25/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A131 | 00000 |
| WP80, WSP80 | 4 | Bevel | 850° | 19/32" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A136 | 00000 |
| WP80, WSP80 | BB | Bevel | 850° | 21/32" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A137 | 00000 |
| WP80, WSP80 | CC 60 | Bevel | 850° | 21/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A138 | 00000 |
| WP80, WSP80 | DD 45 | Bevel | 850° | 25/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A139 | 00000 |
| WP80, WSP80 | F | Bevel | 850° | 33/64" | 15/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A132 | 0000 |
| WP80, WSP80 | GW1 | Gullwing | 850° | 45/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A133 | 0000 |
| WP80, WSP80 | GW2 | Gullwing | 850° | 45/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A145 | 00000 |
| WP80, WSP80 | KN | Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A141 | 00000 |
| WP80, WSP80 | KNSL | 45° Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A144 | 00000 |
| WP80, WSP80 | LT1S | Round | 850° | 5/8" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A34 | 0000 |
| WP80, WSP80 | LTA | Chisel | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A54 | 0000 |
| WP80, WSP80 | LTAS | Round | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A51 | 0000 |
| WP80, WSP80 | LTB | Chisel | 850° | 1/2" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A52 | 0000 |
| WP80, WSP80 | LTC | Chisel | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A55 | 0000 |
| WP80, WSP80 | LTCS | Round | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7724A53 | 0000 |
| WP80, WSP80 | LTD | Chisel | 850° | 1/2" | 3/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7008A119 | 0000 |
| WP80, WSP80 | LTK | Chisel | 850° | 13/16" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7008A122 | 0000 |
| WP80, WSP80 | LTL | Chisel | 850° | 13/16" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7008A124 | 0000 |
| WP80, WSP80 | LTS | Conical | 850° | 13/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 7008A126 | 0000 |
Weller XHT Series Tips
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP200 | XHT C | Chisel | 850° | 1 7/8" | 1/8" | Plug | Soldering | WR2, WT1H, WT2M | 5793N31 | 000000 |
| WP200 | XHT D | Chisel | 850° | 1 7/8" | 13/64" | Plug | Soldering | WR2, WT1H, WT2M | 5793N29 | 00000 |
| WP200 | XHT E | Chisel | 850° | 1 7/8" | 19/64" | Plug | Soldering | WR2, WT1H, WT2M | 5793N32 | 00000 |
| WP200 | XHT F | Chisel | 850° | 1 7/8" | 3/8" | Plug | Soldering | WR2, WT1H, WT2M | 5793N33 | 00000 |
Weller XNT Series Tips
Round
Chisel
30° Chisel
Conical
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP65, WTP90, WXP65 | 1LX | Round | 850° | 1 43/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 7008A517 | 000000 |
| WP65, WTP90, WXP65 | 1SCNW | Chisel | 850° | 1 1/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 7008A519 | 00000 |
| WP65, WTP90, WXP65 | 1X | Round | 850° | 1 7/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 7008A512 | 00000 |
| WP65, WTP90, WXP65 | AX | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 7008A511 | 00000 |
| WP65, WTP90, WXP65 | BX | Chisel | 850° | 1 7/16" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 7008A521 | 00000 |
| WP65, WTP90, WXP65 | HX | 30° Chisel | 850° | 1 7/16" | 1/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 7008A518 | 00000 |
| WP65, WTP90, WXP65 | L | Chisel | 850° | 1 15/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 7008A513 | 00000 |
| WP65, WTP90, WXP65 | S | Conical | 850° | 1 15/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 7008A514 | 00000 |
Weller XT Series Tips
Bevel
Round
Chisel
30° Chisel
45° Chisel
Gullwing
Knife
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP120, WXP120 | AA 60 | Bevel | 850° | 1 29/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A522 | 000000 |
| WP120, WXP120 | BB 45 | Bevel | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A523 | 00000 |
| WP120, WXP120 | BS | Round | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A528 | 00000 |
| WP120, WXP120 | BSC | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A538 | 00000 |
| WP120, WXP120 | BSL | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A539 | 00000 |
| WP120, WXP120 | BX | 30° Chisel | 850° | 1 13/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A542 | 00000 |
| WP120, WXP120 | CC 45 | Bevel | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A524 | 00000 |
| WP120, WXP120 | CS | Round | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A529 | 00000 |
| WP120, WXP120 | CSL | Chisel | 850° | 1 27/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A541 | 00000 |
| WP120, WXP120 | D 45 | 45° Chisel | 850° | 1 29/64" | 1/4" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A533 | 00000 |
| WP120, WXP120 | DL | Chisel | 850° | 1 37/64" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A536 | 00000 |
| WP120, WXP120 | DS | Round | 850° | 1 3/8" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A531 | 00000 |
| WP120, WXP120 | F 30 | Bevel | 850° | 1 29/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A532 | 00000 |
| WP120, WXP120 | GW1 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A526 | 00000 |
| WP120, WXP120 | GW2 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A535 | 00000 |
| WP120, WXP120 | H | Chisel | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A527 | 00000 |
| WP120, WXP120 | HX | Chisel | 850° | 1 1/2" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A537 | 00000 |
| WP120, WXP120 | KN | Knife | 850° | 1 49/64" | 5/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A525 | 00000 |
| WP120, WXP120 | MX | Chisel | 850° | 1 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 7008A543 | 00000 |
Weller DX Series Nozzles
