Filter by
Approximate Heat-Up Time
Data Connection
Power Source
Station Type
Tip Shape
Wattage
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Manufacturer Series
Maximum Vacuum
Number of Channels
REACH
RoHS
Airflow
Cord Length
Display Type
Duty Cycle
Manufacturer Model Number
For Nozzle Manufacturer Series
Manufacturer
Maximum Temperature
Minimum Temperature
Plug Number of Blades
Multichannel Soldering and Desoldering Stations
Switch between different soldering and desoldering tools quickly—these stations have either two or three channels to plug in multiple tools so they're ready to go. You can adjust the temperature for the best results. To protect sensitive components, they don’t create ESD (electrostatic discharge). Additional tips and nozzles are sold separately.
Choose a station that’s compatible with your soldering or desoldering iron. Each station includes a variety of tools to solder, desolder, or both—determine if the included tools work for your application.
Add different shaped and sized tips depending on the components you're soldering. The smaller the point width, the smaller the solder joint. For example, use a tip with a point width of 1/64” for soldering extra-small electronics under a microscope. For heavy duty soldering and large components, a tip with a point width of 1/8” works better.
Weller WR3M Series Stations
Chisel Tip
Display
Weller WR3M stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station. WR3000M stations have a built-in vacuum for desoldering and a built-in air pump for hot air applications.
Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber. Hot air irons are good for delicately heating soldered electronic parts for removal.
Tip/Nozzle (Plug Connection) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Channels | Station Type | Iron Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. (Point ID) | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WR3000M | |||||||||||
120V AC | |||||||||||
| 3 | Soldering Desoldering Hot Air | 80W 80W 200W | 200° to 850° | 360W | Chisel __ __ | 3/32" 7/64" (5/64"), 3/64" (3/32") 3/64" (1/64"), 1/8" (1/32") | Continuous | 60 sec. | Vacuum Pick-Up Tool One Tip Four Nozzles One Soldering Iron One Desoldering Iron One Hot Air Iron Three Sponges Three Scouring Scrubbers One Soldering Iron Stand One Desoldering Iron Stand One Hot Air Iron Stand | 0000000 | 000000000 |
Weller Soldering Irons
Chisel Tip
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Tip Shape | Point Wd. | Tip Connection Type | For Tip Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WR2, WR3M, WT1, WT1H, WT2M | WP65 | 65W | 150° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Plastic | 24V AC | One Tip | 00000000 | 0000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WP80 | 80W | 150° to 850° | Chisel | 3/32" | Plug | LT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WSP80 | 80W | 200° to 840° | Chisel | 1/16" | Plug | LT | Continuous | 45 sec. | Rubber | 24V AC | One Tip | 0000000 | 000000 |
| WR2, WR3M, WT1H, WT2M | WP120 | 120W | 150° to 845° | Chisel | 1/16" | Plug | XT | Continuous | 14 sec. | Rubber | 24V AC | One Tip | 0000000 | 000000 |
| WR3M, WT1, WT1H, WT2M | WTP90 | 90W | 200° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WR3M, WT2M | WMRP MS | 40W | 200° to 850° | Chisel | 3/64" | Plug | RTM-MS | Continuous | 3 sec. | Rubber | 12V AC | One Tip | 0000000 | 000000 |
Weller Desoldering Irons
Point | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Wd. | ID | Nozzle Connection Type | For Nozzle Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WR2, WR3M | DXV 80 | 80W | 150° to 850° | 1/8" | 5/64" | Plug | DX | Continuous | 65 sec. | Rubber | 24V AC | One Nozzle | 0000000 | 0000000 |
Weller Hot Air Irons
Point | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Airflow, cfm | Wd. | ID | For Nozzle Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WR3M | HAP200 | 200W | 200° to 990° | 0.5 | 3/64" | 1/64" | R | Continuous | 45 sec. | Plastic | 24V AC | One Nozzle | 0000000 | 0000000 |
Replacement Stands
For Iron | |||||
|---|---|---|---|---|---|
| Manufacturer Model Number | For Iron Wattage | Manufacturer Model Number | Includes | Each | |
| DXV80 | 200W | WDH 40 | One Scouring Scrubber | 0000000 | 0000000 |
| HAP200 | 200W | WDH 30 | One Scouring Scrubber | 0000000 | 000000 |
| WMRP MS | 40W | WSR 205 | One Sponge One Scouring Scrubber | 0000000 | 000000 |
| WP65, WP80, WP120 | 65W, 80W, 120W | WDH 10T | One Scouring Scrubber | 0000000 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | WDH 10 | One Scouring Scrubber | 00000000 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | WSR 201 | One Sponge One Scouring Scrubber | 00000000 | 000000 |
| WTP90 | 90W | WSR 200 | One Sponge One Scouring Scrubber | 00000000 | 000000 |
Weller LT Series Tips
Conical
Round
30° Round
Bevel
Gullwing
Knife
45° Knife
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP80, WSP80 | 1L | Conical | 850° | 1 1/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 1SA | Round | 850° | 19/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | 1SLX | 30° Round | 850° | 55/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 22CP | Bevel | 850° | 25/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | 33CP | Bevel | 850° | 25/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 4 | Bevel | 850° | 19/32" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | BB | Bevel | 850° | 21/32" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | CC 60 | Bevel | 850° | 21/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | DD 45 | Bevel | 850° | 25/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | F | Bevel | 850° | 33/64" | 15/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | GW1 | Gullwing | 850° | 45/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | GW2 | Gullwing | 850° | 45/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | KN | Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | KNSL | 45° Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | LT1S | Round | 850° | 5/8" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTA | Chisel | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTAS | Round | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTB | Chisel | 850° | 1/2" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTC | Chisel | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTCS | Round | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTD | Chisel | 850° | 1/2" | 3/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTK | Chisel | 850° | 13/16" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTL | Chisel | 850° | 13/16" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTS | Conical | 850° | 13/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
Weller RTM-MS Series Tips
Gullwing
Chisel
25° Conical
30° Conical
Conical
30° Chisel
Knife
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WMRP MS, WXMP MS | 10GWMS | Gullwing | 850° | 53/64" | 5/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 000000 |
| WMRP MS, WXMP MS | 11MS | Chisel | 850° | 3/4" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 12MS | 25° Conical | 850° | 1 3/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 13MS | 30° Conical | 850° | 1 3/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 14MS | Conical | 850° | 4 21/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 15MS | Conical | 850° | 4 25/64" | 1/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1NWMS | Conical | 850° | 25/32" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1SCMS | Chisel | 850° | 25/32" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3MS | Chisel | 850° | 25/32" | 3/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3XMS | 30° Chisel | 850° | 1 7/64" | 3/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 9MS | Chisel | 850° | 61/64" | 1/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | KNMS | Knife | 850° | 4 13/32" | 17/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | RT8MS | Chisel | 850° | 3/4" | 3/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
Weller XNT Series Tips
Round
Chisel
Conical
30° Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP65, WTP90, WXP65 | 1LX | Round | 850° | 1 43/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 000000 |
| WP65, WTP90, WXP65 | 1SCNW | Chisel | 850° | 1 1/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | 1X | Round | 850° | 1 7/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | AS | Conical | 850° | 1 13/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | AX | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | BX | Chisel | 850° | 1 7/16" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | CS | Round | 850° | 1 15/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | HX | 30° Chisel | 850° | 1 7/16" | 1/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | L | Chisel | 850° | 1 15/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | S | Conical | 850° | 1 15/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
Weller XT Series Tips
Bevel
Round
Chisel
30° Chisel
45° Chisel
Gullwing
Knife
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP120, WXP120 | AA 60 | Bevel | 850° | 1 29/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 000000 |
| WP120, WXP120 | BB 45 | Bevel | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BS | Round | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSC | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSL | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BX | 30° Chisel | 850° | 1 13/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CC 45 | Bevel | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CS | Round | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CSL | Chisel | 850° | 1 27/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | D 45 | 45° Chisel | 850° | 1 29/64" | 1/4" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DL | Chisel | 850° | 1 37/64" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DS | Round | 850° | 1 3/8" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | F 30 | Bevel | 850° | 1 29/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW1 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW2 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | H | Chisel | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | HX | Chisel | 850° | 1 1/2" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | KN | Knife | 850° | 1 49/64" | 5/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | MX | Chisel | 850° | 1 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
Weller DX Series Nozzles
Weller R Series Nozzles
Weller R
Point | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Iron Manufacturer Model Number | Manufacturer Model Number | Max. Temp., °F | Lg. | Wd. | ID | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| HAP200, WXHAP200 | R04 | 1000° | 41/64" | 3/64" | 1/32" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 000000 |
| HAP200, WXHAP200 | R06 | 1000° | 41/64" | 3/64" | 1/64" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 0000 |