Filter by
Tip Shape
Manufacturer
Station Type
Manufacturer Series
Power Source
Approximate Heat-Up Time
Cord Length
Data Connection
DFARS Specialty Metals
Duty Cycle
Electrical Connection
Export Control Classification Number (ECCN)
Maximum Temperature
Number of Blades
REACH
RoHS
Tip Connection
Manufacturer Model Number
Voltage
Display Type
Iron Wattage
Minimum Temperature
Number of Channels
Multichannel Soldering and Desoldering Stations
Switch between different soldering and desoldering tools quickly—these stations have either two or three channels to plug in multiple tools so they're ready to go. You can adjust the temperature for the best results. To protect sensitive components, they don’t create ESD (electrostatic discharge). Additional tips and nozzles are sold separately.
Choose a station that’s compatible with your soldering or desoldering iron. Each station includes a variety of tools to solder, desolder, or both—determine if the included tools work for your application.
Add different shaped and sized tips depending on the components you're soldering. The smaller the point width, the smaller the solder joint. For example, use a tip with a point width of 1/64” for soldering extra-small electronics under a microscope. For heavy duty soldering and large components, a tip with a point width of 1/8” works better.
Weller WX Series Stations
Soldering, Desoldering
Chisel Tip
Display
Chisel Tweezer Tip
Weller WX stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station.
Desoldering tweezers are better than irons for fine work that requires a lot of power, such as soldering and desoldering surface-mount devices.
Tip/Nozzle (Plug Connection) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Channels | Station Type | Iron Wattage | Tweezer Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. (Point ID) | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WX2021 | ||||||||||||
120V AC | ||||||||||||
| 2 | Soldering Desoldering | 40W __ | __ 40W | 210° to 990° | 200W | Chisel Chisel Tweezer | 1/32" 3/64" | Continuous | 10 sec. | Two Tips One Soldering Iron Two Scouring Scrubbers One Desoldering Tweezer Two Soldering Iron Stands | 00000000 | 000000000 |
Weller Soldering Irons
Chisel Tip
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Tip Shape | Point Wd. | Tip Connection Type | For Tip Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WX | WXMP MS | 40W | 200° to 850° | __ | __ | Plug | RTM-MS | Continuous | 10 sec. | Rubber | 12V AC | __ | 00000000 | 0000000 |
| WX | WXP120 | 120W | 200° to 850° | Chisel | 3/32" | Plug | XT | Continuous | 20 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WX | WXP65 | 65W | 200° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WX | WXPP MS | 40W | 200° to 850° | __ | __ | Plug | RTP-MS | Continuous | 3 sec. | Rubber | 12V AC | __ | 0000000 | 000000 |
| WX | WXUP MS | 150W | 360° to 850° | __ | __ | Plug | RTU-MS | Continuous | 7 sec. | Rubber | 24V AC | __ | 0000000 | 000000 |
Weller Desoldering Tweezers
| For Station Manufacturer Series | Wattage | Temp. Range, °F | Tip Connection Type | Manufacturer Model Number | For Tip Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Voltage | Each | |
| WX | 80W | 200° to 850° | Plug | WXMT MS | RTW-MS | Continuous | 10 sec. | 12V AC | 00000000 | 0000000 |
Replacement Stands
For Iron | For Tweezer | ||||||
|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | For Iron Wattage | Manufacturer Model Number | Wattage | Manufacturer Model Number | Includes | Each | |
| __ | __ | WXMT MS | 40W | WSR 210 | One Sponge One Scouring Scrubber | 0000000 | 0000000 |
| __ | __ | WXMT MS | 40W | WDH 60 | One Scouring Scrubber | 00000000 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | __ | __ | WDH 10 | One Scouring Scrubber | 00000000 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | __ | __ | WSR 201 | One Sponge One Scouring Scrubber | 00000000 | 000000 |
| WXMP MS | 40W | __ | __ | WDH 51 | One Scouring Scrubber | 00000000 | 00000 |
| WXPP MS | 40W | __ | __ | WSR 208 | One Sponge One Scouring Scrubber | 0000000 | 000000 |
Weller RTM-MS Series Tips
Gullwing
Chisel
25° Conical
30° Conical
Conical
30° Chisel
Knife
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WMRP MS, WXMP MS | 10GWMS | Gullwing | 850° | 53/64" | 5/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 000000 |
| WMRP MS, WXMP MS | 11MS | Chisel | 850° | 3/4" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 12MS | 25° Conical | 850° | 1 3/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 13MS | 30° Conical | 850° | 1 3/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 14MS | Conical | 850° | 4 21/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 15MS | Conical | 850° | 4 25/64" | 1/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1NWMS | Conical | 850° | 25/32" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1SCMS | Chisel | 850° | 25/32" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3MS | Chisel | 850° | 25/32" | 3/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3XMS | 30° Chisel | 850° | 1 7/64" | 3/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 9MS | Chisel | 850° | 61/64" | 1/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | KNMS | Knife | 850° | 4 13/32" | 17/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | RT8MS | Chisel | 850° | 3/4" | 3/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
Weller RTP-MS Series Tips
Conical
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WXPP MS | RTP 001 C MS | Conical | 850° | 45/64" | 0.003" | Plug | Soldering | WX | 0000000 | 000000 |
| WXPP MS | RTP 004 C MS | Conical | 850° | 41/64" | 1/64" | Plug | Soldering | WX | 0000000 | 00000 |
| WXPP MS | RTP 013 S MS | Chisel | 850° | 41/64" | 1/16" | Plug | Soldering | WX | 0000000 | 00000 |
Weller RTU-MS Series Tips
Conical
30° Conical
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WXUP MS | RTU 004 C MS | Conical | 850° | 1 7/64" | 1/64" | Plug | Soldering | WX | 0000000 | 000000 |
| WXUP MS | RTU 004 C MS | 30° Conical | 850° | 1 35/64" | 1/64" | Plug | Soldering | WX | 0000000 | 00000 |
| WXUP MS | RTU 008 C X MS | 30° Conical | 850° | 1 35/64" | 5/16" | Plug | Soldering | WX | 0000000 | 00000 |
| WXUP MS | RTU 015 S MS | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WX | 0000000 | 00000 |
| WXUP MS | RTU 022 S MS | Chisel | 850° | 1 7/64" | 3/32" | Plug | Soldering | WX | 0000000 | 00000 |
| WXUP MS | RTU 032 S MS | Chisel | 850° | 1 7/64" | 1/8" | Plug | Soldering | WX | 0000000 | 00000 |
Weller XNT Series Tips
Round
Chisel
30° Chisel
Conical
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP65, WTP90, WXP65 | 1LX | Round | 850° | 1 43/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 000000 |
| WP65, WTP90, WXP65 | 1SCNW | Chisel | 850° | 1 1/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | 1X | Round | 850° | 1 7/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | AX | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | BX | Chisel | 850° | 1 7/16" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | HX | 30° Chisel | 850° | 1 7/16" | 1/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | L | Chisel | 850° | 1 15/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | S | Conical | 850° | 1 15/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
Weller XT Series Tips
Bevel
Round
Chisel
30° Chisel
45° Chisel
Gullwing
Knife
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP120, WXP120 | AA 60 | Bevel | 850° | 1 29/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 000000 |
| WP120, WXP120 | BB 45 | Bevel | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BS | Round | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSC | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSL | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BX | 30° Chisel | 850° | 1 13/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CC 45 | Bevel | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CS | Round | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CSL | Chisel | 850° | 1 27/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | D 45 | 45° Chisel | 850° | 1 29/64" | 1/4" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DL | Chisel | 850° | 1 37/64" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DS | Round | 850° | 1 3/8" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | F 30 | Bevel | 850° | 1 29/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW1 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW2 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | H | Chisel | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | HX | Chisel | 850° | 1 1/2" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | KN | Knife | 850° | 1 49/64" | 5/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | MX | Chisel | 850° | 1 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
Weller RTW-MS Series Tweezer Tips
45° Conical Tweezer
45° Chisel Tweezer
| Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | For Tweezer Manufacturer Model Number | Each | |
| 1MS | 45° Conical Tweezer | 850° | 55/64" | 1/64" | Plug | Desoldering | WX | WXMT MS | 00000000 | 000000 |
| 2MS | 45° Chisel Tweezer | 850° | 55/64" | 1/32" | Plug | Desoldering | WX | WXMT MS | 00000000 | 00000 |