About Actuated On/Off Valves
More
Compact Solenoid On/Off Valves
Lower profile and available in smaller connection sizes than standard valves, these fit in tight spots. They operate on electricity to automatically start and stop flow.
Valves are normally closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- For Use With: See table
| Pipe Size  | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | For Use With | Each | |
Normally Closed—24V DC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4 | Female | NPT | 0.21 | 285 psi @ 131° F | Zero Pressure Drop | 32° to 180° | 1 9/16" | 3" | Air, Argon, Deionized Water, Helium, Nitrogen, Xenon | 00000000 | 0000000 |
Batch-Dispensing On/Off Valves
- For Use With: Beverage, Water, Kerosene, Bleach, Boric Acid, Deionized Water, Oil, Diesel Fuel, Food
Accurately and consistently dispense a specific amount of liquid—these actuated valves have a screen and buttons for programming batch size and calibration. They’ll automatically shut off once the set amount of liquid has been released. Their stainless steel body resists corrosion, so these valves can be used with harsh chemicals.
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Gender | Thread Type | Flow Range, gpm | Pipe Schedule | Maximum Pressure | Maximum Temperature, °F | Maximum Current Draw, A | Valve Length | Width | Height | Environmental Rating | Specifications Met | Each | |
Stainless Steel Body with Fluoroelastomer Rubber Seals | ||||||||||||||
Normally Closed—120V AC | ||||||||||||||
| 1/2 | Female | NPT | 2 to 22 | 40 | 145 psi @ 175° F | 140° | 0.06 | 11 1/4" | 3 7/16" | 5 5/8" | IP65 | CSA Certified; UL Recognized Component | 0000000 | 000000000 |
| 3/4 | Female | NPT | 3 to 38 | 40 | 145 psi @ 175° F | 140° | 0.06 | 12 3/16" | 3 7/16" | 5 3/4" | IP65 | CSA Certified; UL Recognized Component | 0000000 | 00000000 |
| 1 | Female | NPT | 5 to 62 | 40 | 145 psi @ 175° F | 140° | 0.06 | 12 3/8" | 3 7/16" | 5 7/8" | IP65 | CSA Certified; UL Recognized Component | 0000000 | 00000000 |
Solenoid Diverting Valves for Chemicals
- For Use With: Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol, Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene
- Seal Material: PTFE Plastic
Often used for chemical analysis and other laboratory testing, these valves have a PTFE seal and body to withstand aggressive and corrosive solutions. All operate on electricity to automatically divert flow between ports. They do not require a pressure drop for operation. Any port can be used as an inlet or an outlet. Valves can direct flow from the inlet port to either outlet port. They cannot shut off flow. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Size | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Temp. Range, °F | Actuation Time | Valve Lg. | O'all Ht. | Mounting Fasteners Included | No. of | Thread Size | Each | |
PTFE Plastic Body with Wire Leads—12V DC | |||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||
| 1/8 | __ | L-Pattern | 15.85 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.04 sec. | 1 3/4" | 2" | No | 7 | 4-40 | 0000000 | 0000000 |
UNF Female × UNF Female × UNF Female | |||||||||||||||
| __ | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 1 1/2" | 1 13/16" | No | 7 | 4-40 | 0000000 | 000000 |
| __ | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 3/4" | 1 3/16" | No | 5 | 2-56 | 0000000 | 000000 |
PTFE Plastic Body with Wire Leads—24V DC | |||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||
| 1/8 | __ | L-Pattern | 15.85 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.04 sec. | 1 3/4" | 2" | No | 7 | 4-40 | 0000000 | 000000 |
UNF Female × UNF Female × UNF Female | |||||||||||||||
| __ | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 1 1/2" | 1 13/16" | No | 7 | 4-40 | 0000000 | 000000 |
| __ | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 3/4" | 1 3/16" | No | 5 | 2-56 | 0000000 | 000000 |