McMaster-Carr logo
    Filter by
    Operation Type
    Relay Type
    System of Measurement
    Number of Terminals
    Number of Circuits Controlled
    Switch Designation
    Industrial Info Compare
    Number of Timing Ranges
    Horsepower @ Switching Voltage
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    116 Products

    Solid State Surface-Mount Timer Relays

    Image of Product. Front orientation. Contains Annotated. Timer Relays. Solid State Surface-Mount Timer Relays.
    Attach these relays to a flat surface using the mounting hole. They have no moving parts, so compared to mechanical switches, they require less maintenance, last longer, and are quieter.
    Delayed Start (Delay on Make)—Delayed start (delay on make) relays allow you to set how long it takes for the relay to turn on after input voltage is applied. For example, a drill starts pumping a lubricant immediately, but it does not start rotating until the set time has elapsed.
    Delayed Switch Off (Delay on Break)—Delayed switch off (delay on break) relays activate with a switch instead of input voltage. When the switch is turned off, the relay remains on for a programmed amount of time before turning off. For example, a projector’s light is turned off with a switch, but its cooling fan continues to run for a set time.
    Interval—Interval relays use input voltage to turn on for a programmed amount of time. For example, when a part moving down a conveyor reaches a certain location, a cleaning spray comes on for a set time.
    Repeat Cycle—Repeat cycle relays turn on for a duration, then off for the same duration. They alternate between the two cycles until input voltage is removed. A common example would be a flashing light.
    Switch on (Single Shot)—Switch on (single shot) relays require a switch to activate the relay. They’ll stay on for a programmed amount of time. For example, lights in a storage room are turned on with a switch and stay on for a set time before turning off.
    Potentiometer—Switches with a potentiometer (variable switch) allow you to adjust the delay within the range.
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    No.
    of
    Overall
    Switching Current
    @ Voltage
    Max. Switching
    Voltage, V AC
    hp @ Switching Voltage
    Ht.
    Wd.
    Dp.
    Features
    Each
    Delayed Start (Delay on Make)
     
    1 Circuit Controlled with 1 Off—SPST-NO
    212V AC, 12V DC2110.05 sec. to 1 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K7310000000
    212V AC, 12V DC2110.25 sec. to 5 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K732000000
    212V AC, 12V DC2110.5 sec. to 10 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K733000000
    212V AC, 12V DC2113 sec. to 60 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K734000000
    212V AC, 12V DC21115 sec. to 300 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K735000000
    212V AC, 12V DC21130 sec. to 10 min.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K736000000
    224V AC, 24V DC1010.05 sec. to 1 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K751000000
    224V AC, 24V DC1010.25 sec. to 5 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K752000000
    224V AC, 24V DC1010.5 sec. to 10 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K753000000
    224V AC, 24V DC1013 sec. to 60 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K754000000
    224V AC, 24V DC10115 sec. to 300 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K755000000
    224V AC, 24V DC10130 sec. to 10 min.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K756000000
    2120V AC, 120V DC410.05 sec. to 1 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K25000000
    2120V AC, 120V DC410.25 sec. to 5 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K26000000
    2120V AC, 120V DC410.5 sec. to 10 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K27000000
    2120V AC, 120V DC413 sec. to 60 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K28000000
    2120V AC, 120V DC4115 sec. to 300 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K29000000
    2120V AC, 120V DC4130 sec. to 10 min.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K31000000
    224V AC to 240V AC/24V DC to 240V DC1011 sec. to 1,023 sec.1 amp @ 120V AC——2"2"0.89"Potentiometer77055K74000000
     
    1 Circuit Controlled with 1 Off or 1 On—SPDT
    5120V AC2910.05 sec. to 1 sec.8 amp @ 240V AC——2"2"0.9"—77055K45000000
    5120V AC2910.25 sec. to 5 sec.8 amp @ 240V AC——2"2"0.9"—77055K46000000
    5120V AC2910.5 sec. to 10 sec.8 amp @ 240V AC——2"2"0.9"—77055K47000000
    5120V AC2913 sec. to 60 sec.8 amp @ 240V AC——2"2"0.9"—77055K48000000
    5120V AC29115 sec. to 300 sec.8 amp @ 240V AC——2"2"0.9"—77055K49000000
    5120V AC29130 sec. to 10 min.8 amp @ 240V AC——2"2"0.9"—77055K51000000
    5120V AC3610.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T15100000
    5120V AC3610.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T15400000
    5120V AC3611 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T15500000
    512V DC29213 sec. to 60 sec.8 amp @ 240V AC——2"2"0.9"—77055K631000000
    512V DC292115 sec. to 300 sec.8 amp @ 240V AC——2"2"0.9"—77055K632000000
    524V DC4110.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T16100000
    524V DC4110.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T16400000
    524V DC4111 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T16500000
     
    Delayed Switch Off (Delay on Break)
     
    1 Circuit Controlled with 1 Off—SPST-NO
    5120V AC3610.05 sec. to 1 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K3300000
    5120V AC3610.25 sec. to 5 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K3400000
    5120V AC3610.5 sec. to 10 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K3500000
    5120V AC3613 sec. to 60 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K3600000
    5120V AC36115 sec. to 300 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K3700000
    5120V AC36130 sec. to 10 min.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K3800000
    712V DC21710.25 sec. to 5 sec.1 amp @ 120V AC——2"2"0.88"—7457K52200000
    712V DC21713 sec. to 60 sec.1 amp @ 120V AC——2"2"0.88"—7457K52400000
     
    1 Circuit Controlled with 1 Off or 1 On—SPDT
    6120V AC3610.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T45100000
    6120V AC3610.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T45400000
    6120V AC3611 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T45500000
    624V DC4110.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T46100000
    624V DC4110.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T46400000
    624V DC4111 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T46500000
     
    Interval
     
    1 Circuit Controlled with 1 Off—SPST-NO
    5120V AC2510.05 sec. to 1 sec.1 amp @ 120V AC——2"2"0.88"—7457K651000000
    5120V AC2513 sec. to 60 sec.1 amp @ 120V AC——2"2"0.88"—7457K654000000
    5120V AC25130 sec. to 10 min.1 amp @ 120V AC——2"2"0.88"—7457K656000000
     
    1 Circuit Controlled with 1 Off or 1 On—SPDT
    5120V AC3610.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T25100000
    5120V AC3610.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T25400000
    5120V AC3611 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T25500000
    524V DC4110.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T26100000
    524V DC4110.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T26400000
    524V DC4111 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T26500000
     
    Repeat Cycle
     
    1 Circuit Controlled with 1 Off—SPST-NO
    7120V AC3610.05 sec. to 1 sec.1 amp @ 120V AC——2"2"0.88"—7457K661000000
    7120V AC3613 sec. to 60 sec.1 amp @ 120V AC——2"2"0.88"—7457K664000000
    7120V AC36130 sec. to 10 min.1 amp @ 120V AC——2"2"0.88"—7457K666000000
     
    1 Circuit Controlled with 1 Off or 1 On—SPDT
    5120V AC3610.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T55100000
    5120V AC3610.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T55400000
    5120V AC3611 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T55500000
    524V DC4110.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T56100000
    524V DC4110.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T56400000
    524V DC4111 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T56500000
     
    Switch on (Single Shot)
     
    1 Circuit Controlled with 1 Off—SPST-NO
    5120V AC3610.05 sec. to 1 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K641000000
    5120V AC3610.25 sec. to 5 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K642000000
    5120V AC3610.5 sec. to 10 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K643000000
    5120V AC3613 sec. to 60 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K644000000
    5120V AC36115 sec. to 300 sec.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K645000000
    5120V AC36130 sec. to 10 min.1 amp @ 120V AC——2"2"0.88"Potentiometer7457K646000000
    712V DC21710.25 sec. to 5 sec.1 amp @ 120V AC——2"2"0.88"—7457K51200000
    712V DC21710.5 sec. to 10 sec.1 amp @ 120V AC——2"2"0.88"—7457K51300000
    712V DC21713 sec. to 60 sec.1 amp @ 120V AC——2"2"0.88"—7457K51400000
     
    1 Circuit Controlled with 1 Off or 1 On—SPDT
    6120V AC3610.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T35100000
    6120V AC3611 sec. to 100 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T35200000
    6120V AC3610.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T35400000
    6120V AC36110 sec. to 1,000 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T35300000
    6120V AC3611 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T35500000
    624V DC4110.1 sec. to 10 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T36100000
    624V DC4111 sec. to 100 sec.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T36200000
    624V DC4110.1 min. to 10 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T36400000
    624V DC4111 min. to 100 min.30 amp @ 240V AC/24V DC2401 hp @ 120V AC
    2 hp @ 240V AC    		3"2"1.4"—2809T36500000
     

    Solid State DIN-Rail Mount Timer Relays

    Image of Product. Front orientation. Contains Annotated. Timer Relays. Solid State DIN-Rail Mount Timer Relays.
    Mount these timer relays directly to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. Unlike mechanical relays, they have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster. After selecting a timing range, use the knob to adjust the trip time within the timing range.
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    No.
    of
    Overall
    Switching Current
    @ Voltage
    Max. Switching
    Voltage, V AC
    Ht.
    Wd.
    Dp.
    Each
    Delayed Start (Delay on Make)
     
    1 Circuit Controlled with 1 Off—SPST-NO
    624V AC, 48V AC, 120V AC, 240V AC, 24V DC, 48V DC, 60V DC, 120V DC, 240V DC770.1 sec. to 100 hr.0.7 amp @ 240V AC2503 1/2"0.7"2.7"7801K51000000
     
    Interval
     
    1 Circuit Controlled with 1 Off—SPST-NO
    624V AC, 48V AC, 120V AC, 240V AC770.1 sec. to 100 hr.0.7 amp @ 240V AC2503 1/2"0.7"2.7"7801K52000000
     

    Solid State DIN-Rail Mount Multifunction Timer Relays

    Image of Product. Relays with 1 Circuit Controlled, DIP Switches, and Quick-Disconnect Terminals. Front orientation. Timer Relays. Solid State DIN-Rail Mount Multifunction Timer Relays, Timing-Adjustment DIP Switch, 1 Circuit Controlled, Quick-Disconnect-Terminal Wire Connection.
    Image of Product. Relays with 1 Circuit Controlled, DIP Switches, and Screw Terminals. Front orientation. Contains Annotated. Timer Relays. Solid State DIN-Rail Mount Multifunction Timer Relays, Timing-Adjustment DIP Switch, 1 Circuit Controlled, Screw-Terminal Wire Connection.
    Image of Product. Relays with 1 Circuit Controlled, Knob, and Quick-Disconnect Terminals. Front orientation. Contains Annotated. Timer Relays. Solid State DIN-Rail Mount Multifunction Timer Relays, Timing-Adjustment Knob, 1 Circuit Controlled, Quick-Disconnect-Terminal Wire Connection.
    Image of Product. Relays with 1 Circuit Controlled, Knob, and Screw Terminals. Front orientation. Timer Relays. Solid State DIN-Rail Mount Multifunction Timer Relays, Timing-Adjustment Knob, 1 Circuit Controlled, Screw-Terminal Wire Connection.
    Image of Product. Relays with 4 Circuits Controlled. Front orientation. Contains Annotated. Timer Relays. Solid State DIN-Rail Mount Multifunction Timer Relays, Timing-Adjustment Knob, 4 Circuits Controlled.

    Relays with 1

    Circuit

    Controlled, DIP

    Switches, and

    Quick-Disconnect

    Terminals

    Relays with 1

    Circuit

    Controlled, DIP

    Switches, and

    Screw Terminals

    Relays with 1

    Circuit

    Controlled,

    Knob, and

    Quick-Disconnect

    Terminals

    Relays with 1

    Circuit

    Controlled, Knob,

    and Screw Terminals

    Relays with 4

    Circuits Controlled

    For fast installation, mount these relays to 35 mm DIN rail (also known as DIN 3 rail). They also mount to flat surfaces. With no moving parts, these solid state relays last longer and require less maintenance, are quieter, and switch faster than mechanical relays. They provide a variety of timing functions in one relay.
    Timing-Adjustment DIP Switch—Use relays with DIP switches for more precise control than knobs. They make it easier to set multiple relays to the same timing range.
    4 Circuits Controlled—Relays that control 4 circuits require a relay socket (sold separately) to attach to DIN rail.
    Timer Relays
    Sockets
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    Timer Relay Function
    No.
    of
    Overall
    Switching Current
    @ Voltage
    Max. Switching
    Voltage, V AC
    Ht.
    Wd.
    Dp.
    Wire Connection
    Each
    Each
    Timing-Adjustment DIP Switch
     
    1 Circuit Controlled with 1 Off—SPST-NO
    424V AC, 48V AC, 120V AC, 240V AC8Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Delayed Switch Off (Delay on Break)
    Repeat Cycle    		40.1 sec. to 63 min.0.7 amp @ 240V AC2403"0.7"2.4"Quick-Disconnect Terminal7399K250000000———0
    49V DC, 12V DC, 24V DC, 48V DC, 60V DC, 110V DC8Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Delayed Switch Off (Delay on Break)
    Repeat Cycle    		40.1 sec. to 63 min.0.7 amp @ 240V AC2403"0.7"2.4"Quick-Disconnect Terminal7399K26000000———0
    69V DC, 12V DC, 24V DC, 48V DC, 60V DC, 110V DC8Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Delayed Switch Off (Delay on Break)
    Repeat Cycle    		40.1 sec. to 63 min.0.7 amp @ 240V AC2403"0.7"2.4"Screw Terminal7399K28000000———0
     
    Timing-Adjustment Knob
     
    1 Circuit Controlled with 1 Off—SPST-NO
    424V AC, 48V AC, 120V AC, 240V AC8Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Delayed Switch Off (Delay on Break)
    Repeat Cycle    		40.1 sec. to 100 min.0.7 amp @ 240V AC2403"0.7"2.4"Quick-Disconnect Terminal7399K21000000———0
    49V DC, 12V DC, 24V DC, 48V DC, 60V DC, 110V DC8Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Delayed Switch Off (Delay on Break)
    Repeat Cycle    		40.1 sec. to 100 min.0.7 amp @ 240V AC2403"0.7"2.4"Quick-Disconnect Terminal7399K22000000———0
    624V AC, 48V AC, 120V AC, 240V AC8Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Delayed Switch Off (Delay on Break)
    Repeat Cycle    		40.1 sec. to 100 min.0.7 amp @ 240V AC2403"0.7"2.4"Screw Terminal7399K23000000———0
    69V DC, 12V DC, 24V DC, 48V DC, 60V DC, 110V DC8Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Delayed Switch Off (Delay on Break)
    Repeat Cycle    		40.1 sec. to 100 min.0.7 amp @ 240V AC2403"0.7"2.4"Screw Terminal7399K24000000———0
     
    4 Circuits Controlled with 4 Off or 4 On—4PDT
    14120V AC15Delayed Start (Delay on Make)
    Interval
    Repeat Cycle    		40.1 sec. to 10 min.3 amp @ 240V AC2501.1"0.9"2.1"—7339K40000007122K25000000
    14240V AC9Delayed Start (Delay on Make)
    Interval
    Repeat Cycle    		40.1 sec. to 10 min.3 amp @ 240V AC2501.1"0.9"2.1"—7339K60000007122K2500000
    1424V DC45Delayed Start (Delay on Make)
    Interval
    Repeat Cycle    		40.1 sec. to 10 min.3 amp @ 240V AC2501.1"0.9"2.1"—7339K20000007122K2500000
     

    Solid State Versa-Mount Multifunction Timer Relays

    Image of Product. Front orientation. Contains Annotated. Timer Relays. Solid State Versa-Mount Multifunction Timer Relays, 1 Circuit Controlled.
    Image of Product. Front orientation. Contains Annotated. Timer Relays. Solid State Versa-Mount Multifunction Timer Relays, 2 Circuits Controlled.

    1 Circuit Controlled

    2 Circuits Controlled

    Install these relays in a panel cutout or plug them into a relay socket. Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster. They give you a variety of timing functions in one relay.
    1 Circuit Controlled—Single-circuit relays give you additional flexibility—they have two types of delayed switch off (delay on break) functions and two types of signal on/off delay functions.
    Sockets—Relay sockets (sold separately) mount to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. They also mount to flat surfaces.
    Timer Relays
    Sockets
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    Timer Relay Function
    No.
    of
    Overall
    Switching Current
    @ Voltage
    Ht.
    Wd.
    Dp.
    Features
    Each
    Each
    1 Circuit Controlled with 1 Off or 1 On—SPDT
    1124V AC, 48V AC, 120V AC, 240V AC, 12V DC, 24V DC, 48V DC, 60V DC, 120V DC, 240V DC17Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Delayed Switch Off (Delay on Break)
    Repeat Cycle    		70.1 sec. to 999 hr.3 amp @ 240V AC1.9"1.9"2.7"—6963K1400000007122K2100000
     
    2 Circuits Controlled with 2 Off or 2 On—DPDT
    8120V AC, 240V AC, 110V DC, 120V DC13Delayed Start (Delay on Make)
    Interval
    Switch on (Single Shot)
    Repeat Cycle    		40.05 sec. to 300 hr.5 amp @ 240V AC1.9"1.9"2.3"Indicator Light69695K510000007122K190000
     
    Timer Relay Brackets
    Mounting brackets are required to mount relays into a panel cutout.
    Mounting Hole
    Material
    Mounting
    Location
    No.
    of
    Ctr.-to-Ctr.
    Dia.,
    mm
    Mounting Fasteners
    Included
    Screw
    Size
    Ht.
    Wd.
    Each
    Polycarbonate
    		Panel23"5YesM5
    		2.28"1.89"6963K22000000

    Solid State DIN-Rail Mount Multifunction Interface Timer Relays

    Image of Product. Front orientation. Contains Annotated. Timer Relays. Solid State DIN-Rail Mount Multifunction Interface Timer Relays.
    Considered solid state because they don’t have any moving parts, these timer relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, preventing damage to your components from voltage spikes, amplifying the relay's signal, and reducing signal interference. Use these relays with switching applications, such as small motors and pilot lights. They offer multiple timing functions in one relay. The included relay socket mounts on 35 mm DIN rail (also known as DIN 3 rail) for fast installation. Relays disconnect from the socket for easy replacement.
    Timer Relays
    Replacement
    Relays
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    Timer Relay Function
    No.
    of
    Overall
    Switching Current @ Voltage
    Max. Switching
    Voltage
    Ht.
    Wd.
    Dp.
    Each
    Each
    1 Circuit Controlled with 1 Off—SPST-NO
    524V AC, 24V DC12Delayed Start (Delay on Make)
    Interval
    Repeat Cycle    		40.1 sec. to 6 hr.2 amp @ 12V AC to 275V AC, 240V AC275V AC3 1/2"0.2"2.8"4799T130000004799T22000000
    524V AC, 24V DC12Delayed Start (Delay on Make)
    Interval
    Repeat Cycle    		40.1 sec. to 6 hr.6 amp @ 2V DC to 33V DC, 24V DC33V DC3 1/2"0.2"2.8"4799T12000004799T2300000
     

    Solid State Versa-Mount Timer Relays

    Image of Product. Front orientation. Contains Annotated. Timer Relays. Solid State Versa-Mount Timer Relays.
    Image of Product. Front orientation. Relay Sockets. Solid State Versa-Mount Timer Relays.

    Sockets

    Mount these timer relays in a panel cutout or plug them into a relay socket for quick installation. Capable of fast switching, they are solid state and have no moving parts, so they require less maintenance, last longer, and are quieter than mechanical relays. Unlike standard relays that switch on and off immediately, timer relays delay before the circuit stops or starts.
    Delayed Off—Delayed off relays let you set how long it takes for the relay to turn off after input voltage is removed. For example, a sensor detects when an item has been placed on a conveyor, triggering the relay to start the conveyor belt and a cooling fan. After the item has moved past another sensor, the input voltage is removed to stop the conveyor, while the cooling fan runs for a set time before shutting off.
    Repeat Cycle—Relays with a repeat cycle alternate between an on cycle and off cycle of equal durations until input voltage is removed. A common example would be a flashing light.
    Asymmetrical Repeat Cycle—Relays with an asymmetrical repeat cycle begin in an on state, then alternate between different durations of off and on for as long as input voltage is applied. For example, a heating system starts with an on period, then switches to an off period once the desired temperature is reached.
    Start-Off Asymmetrical Repeat Cycle—Relays with a start-off asymmetrical repeat cycle begin in an off state, then alternate between different durations of on and off for as long as input voltage is applied. For example, an irrigation system receives a signal and starts in the off state, allowing water to fill before switching on to start pumping.
    Sockets—Relay sockets (sold separately) mount to 35 mm DIN rail (also known as DIN 3 rail) or can be mounted to a flat surface.
    Timer Relays
    Sockets
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    No.
    of
    Overall,
    sec.
    Switching Current
    @ Voltage
    Ht.
    Wd.
    Dp.
    Each
    Each
    Delayed Off
     
    2 Circuits Controlled with 2 Off or 2 On—DPDT
    8120V AC240.05 to 125 amp @ 240V AC1.9"1.9"2.74"69695K7400000007122K1900000
    8120V AC243 to 125 amp @ 240V AC1.9"1.9"2.74"69695K730000007122K190000
     
    Repeat Cycle
     
    2 Circuits Controlled with 2 Off or 2 On—DPDT
    8120V AC, 240V AC, 110V DC, 120V DC10040.05 to 3005 amp @ 240V AC1.9"1.9"3.3"69695K720000007122K190000
     
    Asymmetrical Repeat Cycle
     
    2 Circuits Controlled with 2 Off or 2 On—DPDT
    824V AC, 48V AC, 12V DC, 24V DC, 48V DC8340.05 to 3005 amp @ 240V AC1.9"1.9"3.3"69695K1140000007122K190000
    8120V AC, 240V AC, 110V DC, 120V DC4140.05 to 3005 amp @ 240V AC1.9"1.9"3.3"69695K1130000007122K190000
    1124V AC, 48V AC, 12V DC, 24V DC, 48V DC8340.05 to 3005 amp @ 240V AC1.9"1.9"3.3"8934N140000007122K210000
    11120V AC, 240V AC, 110V DC, 120V DC4140.05 to 3005 amp @ 240V AC1.9"1.9"3.3"8934N130000007122K210000
     
    Start-Off Asymmetrical Repeat Cycle
     
    2 Circuits Controlled with 2 Off or 2 On—DPDT
    824V AC, 48V AC, 12V DC, 24V DC, 48V DC8340.05 to 3005 amp @ 240V AC1.9"1.9"3.3"69695K1120000007122K190000
    8120V AC, 240V AC, 110V DC, 120V DC4140.05 to 3005 amp @ 240V AC1.9"1.9"3.3"69695K1110000007122K190000
    1124V AC, 48V AC, 12V DC, 24V DC, 48V DC8340.05 to 3005 amp @ 240V AC1.9"1.9"3.3"8934N120000007122K210000
    11120V AC, 240V AC, 110V DC, 120V DC4140.05 to 3005 amp @ 240V AC1.9"1.9"3.3"8934N1110000007122K210000
     
    Timer Relay Brackets
    Image of Product. Front orientation. Timer Relay Brackets. Solid State Versa-Mount Timer Relays.
    Mounting brackets are required to mount relays into a panel cutout.
    Mounting Hole
    Material
    Mounting
    Location
    No.
    of
    Ctr.-to-Ctr.
    Dia.,
    mm
    Mounting Fasteners
    Included
    Screw
    Size
    Ht.
    Wd.
    Each
    Polycarbonate
    		Panel23"5YesM5
    		2.28"1.89"6963K22000000
    back to top