These solvent-based degreasers contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox, from parts and fittings. They are nonflammable and less hazardous than other solvents that remove lubricants, such as nPB, PERC, and TCE. They also evaporate quickly, allowing parts to be used shortly after cleaning.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls. They contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox. They are nonflammable and less hazardous than other solvents that remove lubricants, such as nPB, PERC, and TCE. Use these degreasers as the primary cleaner or as a final rinse to ensure parts are completely clean. They evaporate quickly, allowing parts to be used shortly after cleaning.

Remove brake fluid, grease, and oil from brakes with these solvent-based cleaners. They dry fast without leaving a residue. For use on hard, nonporous surfaces.

For strong bonds, clean and degrease surfaces before applying adhesives. These cleaners are NSF registered K1 for use in non-food-processing areas within food-processing facilities.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax. These cleaners are NSF registered K2 for use in food-processing environments.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards. Product regulations restrict sales to the listed jurisdictions/areas.

Cleaners that are NSF registered K2 or NSF registered P1 can be used in food-processing environments.

Aerosol cans with a flip-up straw have a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense cleaner as a spray.

Eliminate dirt, oil, and grease buildup in electrical equipment such as relays, switches, and cables. Product regulations restrict sales to the listed jurisdictions/areas.

Cleaners that are NSF registered K2 can be used in food-processing environments.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Cleaners provide long-lasting protection for all metal surfaces. Sealants for metal surfaces protect electrical contacts and connections in high humidity, corrosive, and salty environments. Sealants for gold surfaces improve conductivity and provide lasting protection.

Apply to electrical connections such as switches and lugs to prevent corrosion, enhance conductivity, and suppress arcing. These inhibitors protect and lubricate the connection while sealing out liquids and gases.

The compound is easy to apply with the included brush.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time. Product regulations restrict sales to the listed jurisdictions/areas.

Sprays with hydrofluoroolefin gas propellant are less harmful to the environment than sprays with hydrofluorocarbon gas propellant.

Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents. Stem is male.

These adhesive removers are safe, easy to use, and virtually odorless. They evaporate slowly, allowing them to work for up to 24 hours.

Use these cleaners to remove dirt, grime, and stains from most surfaces.

Cleaners in dissolvable packets are sized for dilution in 32-fl. oz. spray bottles. Their concentrated design means they take up less storage space than liquid concentrate cleaners, and they don’t require the use of gloves during mixing.

Cleaners that meet Green Seal GS-37 are certified as environmentally safe for industrial use. Cleaners that meet the EPA Safer Choice Standard are made of environmentally friendly ingredients. These cleaners also help you meet LEED Green Building standards.

Clean fingerprints, uncured epoxy residue, flux, and light oils off printed circuit boards and electronic connectors. These saturated wipes won’t leave behind residue.

These sanitizers are made from sterile denatured ethanol and can be used in clean rooms. The containers come double bagged. They cannot be sold outside the United States due to product registration requirements.

These disinfectants contain quaternary ammonium compounds—also known as quats—to kill bacteria, viruses, and fungi on hard, nonporous surfaces. They’re commonly used to clean laboratories and areas that are regularly exposed to pathogens, such as hospital rooms. In addition to killing pathogens, they also remove dirt and odors. These disinfectants meet the EPA’s criteria for use against SARS-CoV-2, the virus that causes COVID-19, and help you comply with OSHA 29 CFR 1910.1200 for workplace decontamination. For proper use, let disinfectants soak on surfaces for the listed contact time before wiping away.

Disinfectants that come in dissolvable packets easily break down in water to create a neutral-pH solution with no risk of spilling hazardous chemicals. Use them with sprayers, cloths, mops, and sponges. They don’t take up a lot of storage space.

Kill bacteria, viruses, and fungi. Some of these cleaners also remove dirt. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).