About Plain Bearings
More
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Graphalloy bearings perform at extreme temperatures and under water. They are electrically conductive and wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
|---|---|---|---|---|---|---|
For 1 5/16" Shaft Dia. | ||||||
| 1 5/8" | 2 1/2" | 5,250 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 000000 |
For 1 3/8" Shaft Dia. | ||||||
| 1 5/8" | 1" | 2,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 5/8" | 1 1/2" | 3,300 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 5/8" | 2" | 4,400 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 5/8" | 3" | 6,600 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
Graphalloy | ||||||
For 1 1/8" Shaft Dia. | ||||||
| 1 5/8" | 1 3/4" | 1,450 lbs. @ 30 rpm | Embedded | -450° to 750° | 0000000 | 00000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1 5/8" | 1" | 2,500 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
| 1 5/8" | 1 1/4" | 3,100 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 1 1/2" | 3,750 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 1 5/8" | 4,050 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 00000 |
| 1 5/8" | 1 3/4" | 4,350 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 2" | 5,000 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 3" | 7,500 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 1 5/16" Shaft Dia. | |||||||
| 1 5/8" | 1 1/2" | 3,900 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 2" | 5,250 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 00000 |
| 1 5/8" | 2 1/2" | 6,550 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 4" | 10,500 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 000000 |
For 1 3/8" Shaft Dia. | |||||||
| 1 5/8" | 1" | 2,750 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 5/8" | 1 1/8" | 3,050 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
| 1 5/8" | 1 1/4" | 3,400 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 5/8" | 1 1/2" | 4,100 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 5/8" | 1 3/4" | 4,800 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 2" | 5,500 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 2 1/2" | 6,850 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 3" | 8,250 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 5/8" | 4" | 11,000 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 000000 |
For 1 7/16" Shaft Dia. | |||||||
| 1 5/8" | 1" | 2,850 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
| 1 5/8" | 1 1/2" | 4,300 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
| 1 5/8" | 2" | 5,750 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1 5/16" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1 5/8" | 2 1/2" | 11,100 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 000000 |
For 1 3/8" Shaft Dia. | |||||||
| 1 5/8" | 1" | 4,450 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 1 5/8" | 1 1/2" | 6,650 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
| 1 5/8" | 2" | 8,900 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
| 1 5/8" | 3" | 13,350 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with Steel Shell and Neoprene Rubber Cushion | ||||||||
|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||
| 1 5/8" | 1 1/2" | 1 3/8" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 000000 |
841 Bearing Bronze Bearings with 304 Stainless Steel Shell and Silicone Rubber Cushion | ||||||||
For 1 1/8" Shaft Dia. | ||||||||
| 1 5/8" | 1 1/2" | 1 1/2" | 670 lbs. @ 30 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||
| 1 5/8" | 2" | 8,000 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 000000 |
For 1 5/16" Shaft Dia. | ||||||
| 1 5/8" | 2 1/2" | 13,100 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 1 3/8" Shaft Dia. | ||||||
| 1 5/8" | 1 1/2" | 8,250 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 1 5/8" | 2" | 11,000 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 1 5/8" | 3" | 16,500 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 1 5/8" | 4" | 22,000 lbs. @ 30 rpm | Required | -350° to 450° | 0000000 | 00000 |
Multipurpose Sleeve Bearings with Groove
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 932 bearing bronze is sometimes called 660 leaded bronze.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||
|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||
| 1 5/8" | 2" | 7,000 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 000000 |
Easy-Install Dry-Running Flanged Sleeve Bearings
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Plastic Bearings  | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | |||||||||
| 1 5/8" | 1 9/16" | 2 1/4" | 1/16" | 700 lbs. @ 10 rpm | 660 lbs. @ 10 rpm | White | 0° to 200° | 0000000 | 00000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 3/8" Shaft Dia. | |||||||||
| 1 5/8" | 1" | 2" | 1/8" | 3,150 lbs. @ 30 rpm | 2,600 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1 3/8" Shaft Dia. | ||||||||||
| 1 5/8" | 1" | 2" | 1/8" | 2,750 lbs. @ 30 rpm | 3,300 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1 3/8" Shaft Dia. | ||||||||||
| 1 5/8" | 1" | 2" | 1/8" | 4,450 lbs. @ 30 rpm | 3,650 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 00000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant, so they're safe for use in food applications.
UHMW bearings resist chemicals better than 841 bronze bearings, and they retain oil better in wet environments. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | ||||||||||||
| 1 5/8" | 1 9/16" | 2 1/4" | 1/16" | 390 lbs. @ 30 rpm | 250 lbs. @ 30 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1 3/8" Shaft Dia. | ||||||||||
| 1 5/8" | 1" | 2" | 1/8" | 5,500 lbs. @ 30 rpm | 6,600 lbs. @ 30 rpm | Required | -350° to 450° | 75,000 | 0000000 | 000000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 3/8" Shaft Dia. | |||||||||
| 1 5/8" | 1" | 2" | 1/8" | 6,150 lbs. @ 30 rpm | 7,450 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 000000 |