Use where high loads and speeds are not required.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Use where high loads and speeds are not required.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

An aluminum shell adds strength.

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.