McMaster-Carr logo
    Filter by
    Plain Bearing Type
    For Housing ID
    Attribute Image
    System of Measurement
    Bearing Type
    Shaft Mount Type
    Flange Thickness
    Shaft Type
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Lubricant
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    62 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Extreme-Strength Heat-Treated Iron Copper—Our strongest oil-embedded sleeve bearings. They’re heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they’re often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1 3/4"2 1/4"2"7,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K679000000
    1 3/4"2 1/4"2 1/2"8,750 lb. @ 30 rpmSynthetic Oil-35 to 3006391K81500000
    1 3/4"2 1/4"3"10,500 lb. @ 30 rpmMineral Oil10 to 2206391K88100000
    1 7/8"2 1/4"3/4"2,800 lb. @ 30 rpmSynthetic Oil-35 to 3006391K82800000
    1 7/8"2 1/4"2"7,500 lb. @ 30 rpmSynthetic Oil-35 to 3006391K68100000
    1 7/8"2 1/4"2 1/2"9,350 lb. @ 30 rpmSynthetic Oil-35 to 3006391K49100000
    1 7/8"2 1/4"3"11,250 lb. @ 30 rpmMineral Oil10 to 2206391K88200000
    1 15/16"2 1/4"2"7,750 lb. @ 30 rpmSynthetic Oil-35 to 3006391K49200000
    2"2 1/4"1/2"2,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K82900000
    2"2 1/4"3/4"3,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K83100000
    2"2 1/4"1"4,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K68400000
    2"2 1/4"1 1/2"6,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K83200000
    2"2 1/4"2"8,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K46500000
    2"2 1/4"2 1/2"10,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K46600000
    2"2 1/4"3"12,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K83300000
    2"2 1/4"4"16,000 lb. @ 30 rpmSynthetic Oil-35 to 3006391K28000000
     
    High-Strength 863 Iron Copper
    2"2 1/4"2"8,900 lb. @ 30 rpmSynthetic Oil-15 to 3002868T25800000
    2"2 1/4"2 1/2"11,100 lb. @ 30 rpmSynthetic Oil-15 to 3002868T25900000
    2"2 1/4"4"17,800 lb. @ 30 rpmSynthetic Oil-15 to 3002868T261000000
     
    Extreme-Strength Heat-Treated Iron Copper
    2"2 1/4"1"9,500 lb. @ 30 rpmMineral Oil10 to 3503741K4800000
    2"2 1/4"2"19,050 lb. @ 30 rpmMineral Oil10 to 3503741K4900000
     

    Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    1 1/2"2 1/4"3"18,000 lb. @ 30 rpm-350 to 4506381K321000000
    1 3/4"2 1/4"1 3/4"12,250 lb. @ 30 rpm-350 to 4506381K34100000
    2"2 1/4"2"16,000 lb. @ 30 rpm-350 to 4506381K35100000
    2"2 1/4"2 1/2"20,000 lb. @ 30 rpm-350 to 4506381K35200000
    2"2 1/4"4"32,000 lb. @ 30 rpm-350 to 4506381K2800000
     
    High-Strength Chemical-Resistant 954 Bearing Bronze
    2"2 1/4"1 1/2"13,500 lb. @ 30 rpm-350 to 5002867T24300000
     

    Dry-Running Metal-Reinforced Plastic Flanged Sleeve Bearings

    Image of Product. Front orientation. Flanged Sleeve Bearings. Dry-Running Metal-Reinforced Plastic Flanged Sleeve Bearings.
    Combine slippery plastic with the strength of metal. The PTFE core is naturally slippery, so you’ll never have to add lubricant. These bearings also keep your workspace clean with no lubricant to drip or flake and attract dust. Compared to all-metal bearings, they are lighter.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    PTFE with Aluminum Shell—Made of a lightweight shell with corrosion resistance similar to stainless steel and a slippery PTFE inner sleeve.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    PTFE with Aluminum Shell
    2"2 1/4"3"2 1/2"1/8"7,600 lb. @ 30 rpm1,800 lb. @ 30 rpm-400 to 40059575K810000000
     

    Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Flanged Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    1 3/4"2 1/4"2 1/2"3"1/4"17,500 lb. @ 30 rpm14,800 lb. @ 30 rpm-350 to 4507815K74000000
    2"2 1/4"3/4"2 1/2"1/8"6,000 lb. @ 30 rpm6,750 lb. @ 30 rpm-350 to 4507815K83800000
    2"2 1/4"1 1/4"3 1/2"1/8"10,000 lb. @ 30 rpm17,650 lb. @ 30 rpm-350 to 4507815K83900000
    2"2 1/4"2"4 1/2"1/8"16,000 lb. @ 30 rpm27,050 lb. @ 30 rpm-350 to 4507815K8400000
     
    High-Strength Chemical-Resistant 954 Bearing Bronze
    1 3/4"2 1/4"2 1/2"3"1/4"19,650 lb. @ 30 rpm20,950 lb. @ 30 rpm-350 to 5002934T6700000
     

    Dry-Running Metal-Reinforced Plastic Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Metal-Reinforced Plastic Sleeve Bearings.
    Combine slippery plastic with the strength of metal. The PTFE core is naturally slippery, so you’ll never have to add lubricant. These bearings also keep your workspace clean with no lubricant to drip or flake and attract dust. Compared to all-metal bearings, they are lighter.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    PTFE with Aluminum Shell—A lightweight upgrade from our steel shell. These bearings also offer good corrosion resistance similar to stainless steel but aren’t as strong.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    PTFE with Aluminum Shell
    2"2 1/4"3"7,600 lb. @ 30 rpm-400 to 40059575K610000000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Extreme-Strength Heat-Treated Iron Copper—Our strongest oil-embedded flanged sleeve bearings. They’re heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they’re often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1 3/4"2 1/4"2 1/2"3"1/4"8,750 lb. @ 30 rpm9,300 lb. @ 30 rpmSynthetic Oil-35 to 3006338K443000000
    2"2 1/4"3/4"2 1/2"1/8"3,000 lb. @ 30 rpm3,500 lb. @ 30 rpmSynthetic Oil-35 to 3006338K61100000
    2"2 1/4"1 1/4"2 1/2"1/8"5,000 lb. @ 30 rpm3,500 lb. @ 30 rpmSynthetic Oil-35 to 3006338K61200000
    2"2 1/4"2"2 1/2"1/8"8,000 lb. @ 30 rpm3,500 lb. @ 30 rpmSynthetic Oil-35 to 3006338K61300000
     
    High-Strength 863 Iron Copper
    1 3/4"2 1/4"2 1/2"3"1/4"11,100 lb. @ 30 rpm6,900 lb. @ 30 rpmSynthetic Oil-15 to 3002938T6600000
    2"2 1/4"3/4"2 1/2"1/8"3,300 lb. @ 30 rpm3,100 lb. @ 30 rpmSynthetic Oil-15 to 3002938T7230000
    2"2 1/4"1 1/4"2 1/2"1/8"5,550 lb. @ 30 rpm3,100 lb. @ 30 rpmSynthetic Oil-15 to 3002938T72400000
    2"2 1/4"2"2 1/2"1/8"8,900 lb. @ 30 rpm3,100 lb. @ 30 rpmSynthetic Oil-15 to 3002938T72500000
     
    Extreme-Strength Heat-Treated Iron Copper
    1 3/4"2 1/4"2 1/2"3"1/4"23,850 lb. @ 30 rpm14,800 lb. @ 30 rpmMineral Oil10 to 2203731K2900000
    2"2 1/4"2"2 1/2"1/8"19,050 lb. @ 30 rpm6,750 lb. @ 30 rpmMineral Oil10 to 2203731K3100000
     

    Dry-Running Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE—Woven polyester resin reinforces these PTFE bearings to support loads and speeds comparable to metal bearings. Similar to other PTFE options, they are unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.
    Extreme-Strength Ultra-Chemical-Resistant Fiberglass-Backed PTFE—Our strongest PTFE bearings. They’re ideal for heavy loads thanks to a backing layer made of fiberglass. The PTFE core is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.
    Each
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    1-24
    25-99
    100-Up
    High-Strength Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE
    1 1/2"2 1/4"3"9,500 lb. @ 30 rpmBlue-40 to 1501521N25000000000000000000
    2"2 1/4"2"6,350 lb. @ 30 rpmBlue-40 to 1501521N19000000000000000
     
    Extreme-Strength Ultra-Chemical-Resistant Fiberglass-Backed PTFE
    2"2 1/4"1 1/2"15,150 lb. @ 30 rpmGray-55 to 2806365K416000000000000000
    2"2 1/4"3"30,350 lb. @ 30 rpmGray-55 to 2806365K417000000000000000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1 3/4"2 1/4"2 1/2"3"1/4"8,750 lb. @ 30 rpm9,300 lb. @ 30 rpmSynthetic OilPTFE
    -140 to 4601677K396000000
    2"2 1/4"2"2 1/2"1/8"8,000 lb. @ 30 rpm3,500 lb. @ 30 rpmSynthetic OilPTFE
    -140 to 4601677K39700000
     

    Grooved Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Grooved Sleeve Bearings.
    A figure-8-shaped groove provides a flow path for lubricant and distributes it evenly inside the bearing’s surface. A refill hole on the outside lets you inject your lubricant straight into the groove. These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    1 1/2"2 1/4"3"15,750 lb. @ 30 rpm-350 to 4507965K61000000
    1 3/4"2 1/4"1 3/4"10,700 lb. @ 30 rpm-350 to 4507965K6200000
    2"2 1/4"2"14,000 lb. @ 30 rpm-350 to 4507965K6500000
    2"2 1/4"2 1/2"17,500 lb. @ 30 rpm-350 to 4507965K6400000
     
    High-Strength Chemical-Resistant 954 Bearing Bronze
    2"2 1/4"2"15,600 lb. @ 30 rpm-350 to 5002924T6800000
    2"2 1/4"2 1/2"19,500 lb. @ 30 rpm-350 to 5002924T6900000
     

    Dry-Running Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE—Woven polyester resin reinforces these PTFE bearings to support loads and speeds comparable to metal bearings. Similar to other PTFE options, they are unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    High-Strength Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE
    2"2 1/4"2"2 1/2"1/4"6,350 lb. @ 30 rpm2,250 lb. @ 30 rpmBlue-40 to 1501523N17000000
     

    High-Temperature Graphite-Lubricated Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. High-Temperature Graphite-Lubricated Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    2"2 1/4"2"6,400 lb. @ 30 rpm-50 to 7009368T242000000
    2"2 1/4"2 1/2"8,000 lb. @ 30 rpm-50 to 7009368T24300000
     
    High-Strength Chemical-Resistant 954 Bearing Bronze
    2"2 1/4"2"15,600 lb. @ 30 rpm-350 to 5002927T6800000
    2"2 1/4"2 1/2"19,500 lb. @ 30 rpm-350 to 5002927T6900000
     

    High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1 3/4"2 1/4"2 1/2"3"1/4"7,000 lb. @ 30 rpm7,450 lb. @ 30 rpm-50 to 7009440T65000000
     
    back to top