McMaster-Carr logo
    Filter by
    System of Measurement
    Plain Bearing Type
    Bearing Type
    Shaft Mount Type
    For Housing ID
    Attribute Image
    Shaft Type
    Flange Thickness
    Bearing Material
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Lubrication Method
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    101 Products

    Dry-Running Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Ultra-Chemical-Resistant PTFE—The most chemical-resistant bearings we offer. PTFE is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases. PTFE also reduces friction better than nylon but is not as strong.
    Moisture-Resistant Ultra-Low-Friction Plastic Blend—These bearings won't warp or swell from humidity or direct contact with water. They glide effortlessly for applications with frequent starts and stops, such as conveyor systems.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Specs. Met
    Each
    Ultra-Chemical-Resistant PTFE
    18222226255 lb. @ 60 rpm26 lb. @ 60 rpmWhite-200 to 450FDA Compliant 21 CFR 177.1550
    00000000000000
     
    Moisture-Resistant Ultra-Low-Friction Plastic Blend
    162215283360 lb. @ 60 rpm360 lb. @ 60 rpmYellow-50 to 190000000000000
    162220283480 lb. @ 60 rpm360 lb. @ 60 rpmYellow-50 to 190000000000000
    192223261550 lb. @ 60 rpm230 lb. @ 60 rpmYellow-50 to 190000000000000
     

    Dry-Running Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Nylon—The most popular choice, nylon is wear resistant yet economical. Keep in mind, though, that it will swell and weaken when exposed to moisture.
    Moisture-Resistant Acetal—These bearings won’t warp or swell from humidity or direct contact with water, unlike nylon.
    Ultra-Chemical-Resistant PTFE—The most chemical-resistant bearings we offer. PTFE is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases. PTFE also reduces friction better than nylon but is not as strong.
    High-Strength PEEK—Get the strength of reinforced PTFE without compromising on heat resistance. With no additives, such as polyester fabric, PEEK bearings won’t melt at high temperatures. They’re also nearly as slippery and chemical resistant as plain PTFE.
    High-Strength Moisture-Resistant Rulon LR—Won’t swell in wet or humid places, similar to acetal, but can support higher loads. These bearings also operate smoothly from cryogenic to oven-like temperatures.
    Each
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    1-24
    25-99
    100-Up
    Nylon
    162216100 lb. @ 60 rpmOff-White-10 to 2200000000000000000000000000
    162225155 lb. @ 60 rpmOff-White-10 to 2200000000000000000000000
    172220125 lb. @ 60 rpmOff-White-10 to 2200000000000000000000000
    182218110 lb. @ 60 rpmOff-White-10 to 220000000000000000000000
     
    Moisture-Resistant Acetal
    162220135 lb. @ 60 rpmWhite-20 to 1800000000000000000000
     
    Ultra-Chemical-Resistant PTFE
    16222050 lb. @ 60 rpmWhite-350 to 500000000000000000000000
     
    High-Strength PEEK
    1622301,050 lb. @ 60 rpmGold-20 to 48000000000000000000000000
     
    High-Strength Moisture-Resistant Rulon LR
    162220490 lb. @ 60 rpmMaroon-400 to 5500000000000000000000000
     

    Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    1622161,550 lb. @ 60 rpm-350 to 450000000000000
    1622201,950 lb. @ 60 rpm-350 to 45000000000000
    1622403,950 lb. @ 60 rpm-350 to 4500000000000000
    1622454,450 lb. @ 60 rpm-350 to 4500000000000000
    1622757,400 lb. @ 60 rpm-350 to 4500000000000000
    1822182,000 lb. @ 60 rpm-350 to 45000000000000
    1822222,450 lb. @ 60 rpm-350 to 45000000000000
    2022121,450 lb. @ 60 rpm-350 to 450000000000000
    2022161,950 lb. @ 60 rpm-350 to 450000000000000
    2022202,450 lb. @ 60 rpm-350 to 450000000000000
    2022253,100 lb. @ 60 rpm-350 to 4500000000000000
    2022303,700 lb. @ 60 rpm-350 to 450000000000000
    2022404,950 lb. @ 60 rpm-350 to 450000000000000
     

    Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Flanged Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    1622162831,550 lb. @ 60 rpm2,550 lb. @ 60 rpm-350 to 4500000000000000
    1622202831,950 lb. @ 60 rpm2,550 lb. @ 60 rpm-350 to 4500000000000000
    1822122621,300 lb. @ 60 rpm1,700 lb. @ 60 rpm-350 to 4500000000000000
    1822182622,000 lb. @ 60 rpm1,700 lb. @ 60 rpm-350 to 4500000000000000
     
    High-Strength Chemical-Resistant 954 Bearing Bronze
    1622122831,300 lb. @ 60 rpm2,850 lb. @ 60 rpm-350 to 5000000000000000
    1622162831,750 lb. @ 60 rpm2,850 lb. @ 60 rpm-350 to 5000000000000000
    1622202832,200 lb. @ 60 rpm2,850 lb. @ 60 rpm-350 to 5000000000000000
    1622252832,750 lb. @ 60 rpm2,850 lb. @ 60 rpm-350 to 5000000000000000
    1622302833,300 lb. @ 60 rpm2,850 lb. @ 60 rpm-350 to 5000000000000000
    2022122411,650 lb. @ 60 rpm960 lb. @ 60 rpm-350 to 500000000000000
    2022202412,750 lb. @ 60 rpm960 lb. @ 60 rpm-350 to 5000000000000000
     

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Extreme-Strength Heat-Treated Iron Copper—Our strongest oil-embedded sleeve bearings. They’re heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they’re often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    152215690 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
    152220930 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1522251,150 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1522301,350 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    162212590 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    162216790 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    162220990 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    1622251,200 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1622301,450 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1622351,700 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    172215790 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1722201,050 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1722251,300 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1822181,000 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    1822221,200 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    1822281,550 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1822301,650 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
     
    High-Strength 863 Iron Copper
    1622161,400 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1622201,750 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1822181,550 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1822221,900 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
     
    Extreme-Strength Heat-Treated Iron Copper
    1622163,000 lb. @ 60 rpmMineral Oil10 to 2200000000000000
    1622305,600 lb. @ 60 rpmMineral Oil10 to 2200000000000000
    1622356,550 lb. @ 60 rpmMineral Oil10 to 2200000000000000
    1822183,350 lb. @ 60 rpmMineral Oil10 to 2200000000000000
    1822305,600 lb. @ 60 rpmMineral Oil10 to 2200000000000000
     

    Grooved Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Grooved Sleeve Bearings.
    A figure-8-shaped groove provides a flow path for lubricant and distributes it evenly inside the bearing’s surface. A refill hole on the outside lets you inject your lubricant straight into the groove. These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    2022252,700 lb. @ 60 rpm-350 to 45000000000000000
     

    Dry-Running Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings for Food and Beverage.
    Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Moisture-Resistant UHMW Polyethylene—Virtually nonabsorbent, these bearings will keep their shape after washdowns. However, they aren’t suitable for high-temperature treatments such as steam cleaning.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Specs. Met
    Each
    Moisture-Resistant UHMW Polyethylene
    162220100 lb. @ 60 rpmWhite-200 to 180FDA Compliant 21 CFR 177.1520
    000000000000
     

    High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    1822122621,300 lb. @ 60 rpm1,700 lb. @ 60 rpm-350 to 45000000000000000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    162212283590 lb. @ 60 rpm1,250 lb. @ 60 rpmMineral Oil10 to 2200000000000000
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    1622252831,200 lb. @ 60 rpm1,250 lb. @ 60 rpmMineral Oil10 to 220000000000000
    182212262660 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1822182621,000 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    1822222621,200 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    2022202411,200 lb. @ 60 rpm420 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
     
    High-Strength 863 Iron Copper
    1622162831,400 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-15 to 30000000000000
    1622202831,750 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1822122621,050 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1822182621,550 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
     

    High-Temperature Graphite-Lubricated Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. High-Temperature Graphite-Lubricated Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    1622252,150 lb. @ 60 rpm-350 to 45000000000000000
    1622302,600 lb. @ 60 rpm-350 to 4500000000000000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    1822181,000 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4380000000000000
    1822221,200 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B438000000000000
     
    High-Strength 863 Iron Copper
    1622161,400 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300000000000000
    1622201,750 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300000000000000
    1822221,900 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300000000000000
     

    High-Speed Linear Sleeve Bearings

    A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Bearings are for use with round end-supported shafts. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
    Fixed Alignment
    Image of Product. Front orientation. Contains Annotated. Linear Bearings. High-Speed Linear Sleeve Bearings .
    Linear Bearings
    Retaining Rings
    Temp.,
    ° F
    For Shaft
    Dia., mm
    Shaft Clearance,
    mm
    Overall
    Lg., mm
    OD,
    mm
    For Housing
    ID
    With Retaining
    Ring Grooves
    Retaining Ring Groove
    End-to-End Lg., mm
    With End
    Seals
    Dynamic Linear Load
    Cap. @ Speed
    Static Load
    Cap., lb.
    Min.
    Max.
    For Shaft Material
    Each
    Pkg.
    Qty.
    Pkg.
    Ceramic-Lined 6061 Aluminum Bearings
    120.0127 to 0.0381322222 mmYes20No150 lb. @ 100 fpm2,950-200400Stainless Steel, Steel00000000000001000000000000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570000000000000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.357000000000000
    1822182621,000 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.357000000000000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1822181,000 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35700000000000000
     
    High-Strength 863 Iron Copper
    1622161,400 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B439000000000000
    1622201,750 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B439000000000000
    1822221,900 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4390000000000000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4380000000000000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B438000000000000
    182212262660 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B438000000000000
    1822182621,000 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B438000000000000
     
    High-Strength 863 Iron Copper
    1622162831,400 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300000000000000
    1622202831,750 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300000000000000
    1822182621,550 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300000000000000
    1822222621,900 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300000000000000
     
    back to top