These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. All have an aluminum base plate that adds strength, but is flexible enough to bend around a curve. Made of Buna-N, these bumpers resist abrasion, oil, and grease. They can be used outdoors, and all have a medium-hard rating to withstand high levels of impact.

Smooth bumpers distribute gripping force evenly, which makes them good for applications involving motion, such as conveyor belts.

Fine criscross bumpers have better grip on irregular surfaces than smooth bumpers.

Crisscross bumpers have good grip on rough and irregular surfaces, even if there’s debris.

Unthreaded-hole bumpers mount with screws.

Adhesive-back bumpers allow for easy installation.

Drill-your-own hole/glue-on bumpers require contact adhesive or drilling your own holes and mounting them with screws.

For technical drawings and 3-D models, click on a part number.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Bumpers with a medium and medium-soft rating offer a balance of cushioning and impact resistance. The softer the bumper, the more it cushions. Bumpers with an extra-hard and medium-hard rating withstand higher levels of impact than softer bumpers. The harder the bumper, the more impact it withstands.

Polyurethane bumpers have good abrasion resistance. They're also nonmarking.

For technical drawings and 3-D models, click on a part number.