When spills happen, these pallets contain the mess. They’re made of polyethylene, so they won’t degrade from most chemicals. They also meet EPA standards for liquid storage. To minimize potential leak points, these pallets are built without a drain. You’ll need to pump or clean out liquids after a spill—remove the grating to access the interior.

When choosing a pallet, consider the surface area and capacity you need. For number of 55-gallon drums gives you a sense of the surface area of your pallet, while capacity tells you how much liquid it can hold. When used correctly, these pallets meet EPA 40 CFR 264.175. Choose a pallet that’s large enough to hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

Polyethylene pallets last longer than recycled polyethylene pallets.

Styles A and E have U-channel connectors that let you link multiple units of the same style to create a larger spill-control surface.

Styles A, B, and E have a low profile that makes it easy to load containers.

Style B have a double-layer polyethylene bladder that deploys to capture overspills of up to 65 gallons. This one-time-use bladder is 65 1/2" lg. × 66" wd. when fully deployed.

Style D have recessed rings that keep drums in place. You can use a forklift to remove the grating.

Nestable pallets fit within each other like cups to save you space. Stackable pallets sit flush when stacked, so you can access entry points with your forks.

Add a ramp to wheel drums onto your pallet with a hand truck.

A heavy duty solution for safely containing liquids. Made of 12 gauge steel, these pallets won’t crack if they’re hit and won't melt if there's a fire. All meet EPA regulations for storing hazardous liquids. However, they might corrode if exposed to chemicals. Remove the grating for easy cleaning.

When choosing a pallet, consider the surface area and capacity you need. For number of 55-gallon drums gives you a sense of the surface area of your pallet, while capacity tells you how much liquid it can hold. For your system to meet EPA 40 CFR 264.175, the pallet must hold either 10% of the total capacity of your shipment or the full capacity of the largest container—whichever is greater.

Style B pallets don’t nest, so you can access the forklift entry points even when they’re stacked.

Add a ramp to wheel drums onto your pallet with a hand truck.

Built for intermediate bulk container (IBC) tanks, these pallets handle larger spills and heavier loads than other plastic pallets. They’re made of polyethylene plastic, so they’re good for use with chemicals, including acids. However, for environments with heavy wear and tear, steel pallets are the better choice. These pallets have a removable grating for easy cleaning.

When choosing a pallet, consider the surface area and capacity you need. For number of 275-gallon tanks gives you a sense of the surface area of your pallet, while capacity tells you how much liquid it can hold. When used correctly, these pallets meet EPA 40 CFR 264.175. Choose a pallet that’s large enough to hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

Pallets for 2 tanks have a single, continuous basin and can't be separated into individual pallets.

Pallets without a drain have fewer possible leak points, but they’re harder to clean after a spill. Pallets with a drain remove excess liquid, so you don’t need to remove the tanks or pump the liquid out.

Drape a box-shaped tarp (sold separately) over tanks stored outside to protect them from the elements.

Use a bucket (sold separately) to catch spills and drips when dispensing from the tank. The bucket holds up to three gallons. When the bucket fills too high, excess liquid is released into the pallet via an internal drain.

A flexible alternative to spill-control pallets, these trays collapse when not in use for easy storage.

Style A have flexible sidewalls that spring back into shape. Drive over them to drop drums directly onto the mat.

Style A have recessed rings to secure drums and “HAZARDOUS” stenciled on the side.

Style B has removable grating for easy cleaning.

Store hazardous liquids up and out of the way. These basins can be placed directly on the beams of a pallet rack, helping you maximize floor space. Simply set your pallet on top to create a spill-control system. Made of polyethylene, they won’t degrade from most chemicals, including acids. To comply with EPA 40 CFR 264.175 standards, the basin must hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

You can use a forklift to place these basins on your pallet rack. Your pallet sits flush on top, so its fork entry points stay accessible.

Basins without a drain have fewer possible leak points than those with one. Basins with a drain are easy to clean after a spill. Just hook up a 3/4 garden hose to drain liquid away—no need to lift the basin or pump liquid out from the top.

Store hazardous liquids outside and away from people and workspaces. These sheds are made of polyethylene, so they resist most chemicals, including acids. Their roll-up doors offer access from the front or back to move containers, dispense liquids, and protect contents from the elements. All have two or more holes to secure with padlocks (not included).

For use with 55 gal. drums or 275 gal. IBC tanks, these sheds meet EPA 40 CFR 264.175 when used correctly. Choose a shed that’s large enough to hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

Sheds without a drain have fewer potential leak points, but they’re harder to empty after a spill. Sheds with a drain let you empty liquid after a spill without having to remove containers or pump liquids out through the top.

Sheds with a removable grating are easy to clean.

Sheds that hold two 275 gal. tanks have a single, continuous basin, so they can’t be separated into individual sheds.

Unassembled sheds are simple to put together—no fasteners required.

Add a bucket (sold separately) to catch spills and drips when dispensing from the tank. The bucket holds up to 3 gallons. When the bucket fills too high, excess liquid is released into the well of the shed.

Contain spills when moving and storing drums. Dollies have plastic wheels for use on smooth surfaces.

Dollies with solid, textured platforms have a drain spout to dump spills into a container. Add the optional handle to pull the dolly.

Dollies with solid, smooth platforms includes a drum container that rests on the dolly. It is nestable for easy storage. They meet EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Dollies with perforated platforms have removable top grating deck for easy cleaning and a drain plug in the base. Wheel brakes prevent dollies from rolling. They meet EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Dollies with four swivel casters have better maneuverability. Dollies with two swivel casters and two axle mounted wheels have better steering control.

Spills while dispensing drums are contained in an internal sump, so you can transport the drum even after a spill occurs. A U-shaped platform with a recessed step and molded handles makes loading, unloading, and tipping to dispense easy. A strap secures the drum. In the dispensing position, the drum is held at a slight downward angle for better flow. The sump has two openings with garden hose threads for drainage.

Use trucks with polypropylene wheels on smooth surfaces. Trucks with rubber wheels absorb shock to roll on smooth and rough surfaces. Meets EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Base unit for pails and cans has a reservoir to contain spills.

Base unit for drums has a reservoir to contain spills plus a deep well that holds two 5-gallon pails for dispensing.