About Washers
More
Angled-Edge Washers for Toggle Clamp Holding Screws
Use on clamps with open arms to keep the holding screw in place.
302 stainless steel washers provide better corrosion resistance than steel washers.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID | OD | Wd. of Flat | Thick. | Overall Ht. | Each | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| No. 8 | 0.172" | 0.438" | 5/16" | 0.048" | 0.090" | 0000000 | 00000 |
| No. 10 | 0.203" | 0.563" | 3/8" | 0.048" | 0.090" | 0000000 | 000 |
| 1/4" | 0.266" | 0.688" | 1/2" | 0.062" | 0.140" | 0000000 | 000 |
| 5/16" | 0.328" | 0.875" | 9/16" | 0.062" | 0.140" | 0000000 | 000 |
| 3/8" | 0.406" | 1.000" | 3/4" | 0.093" | 0.190" | 0000000 | 0000 |
| 1/2" | 0.531" | 1.266" | 7/8" | 0.122" | 0.220" | 0000000 | 0000 |
| 5/8" | 0.656" | 1.438" | 1" | 0.122" | 0.220" | 0000000 | 0000 |
302 Stainless Steel | |||||||
| No. 8 | 0.172" | 0.438" | 5/16" | 0.048" | 0.090" | 0000000 | 000 |
| No. 10 | 0.203" | 0.563" | 3/8" | 0.048" | 0.090" | 0000000 | 000 |
| 1/4" | 0.266" | 0.688" | 1/2" | 0.062" | 0.140" | 0000000 | 000 |
| 5/16" | 0.328" | 0.875" | 9/16" | 0.062" | 0.140" | 0000000 | 0000 |
| 3/8" | 0.406" | 1.000" | 3/4" | 0.093" | 0.190" | 0000000 | 0000 |