Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.

To prevent breaking down from contact with oil, animal fats, and grease as you wash down equipment with hot water, this hose is covered in blended rubber. It comes with fittings already attached, so it’s easy to connect to a washdown station and wash gun.

These durable wash guns are typically used for frequent washdowns and cleanup.

These wash guns have a high maximum pressure, so use them with pressure washers and high-pressure spray systems.

The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.

With a high maximum pressure and quick-disconnect nozzle connection, these wash guns work with pressure washers and high-pressure spray systems and it’s easy to swap out their nozzles.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

These nozzles handle coolant pressure up to 150 psi.

Draw coolant from your existing tank.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.