Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading. Paint cannot be sold to the regions listed due to local regulatory limits on VOCs (volatile organic compounds).

Paint in an aerosol can dries quickly to prevent dust and debris from adhering.

Enhance, renew, and protect surfaces.

Solvent-based paint keeps its color longer than water-based paint when used outdoors.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Create a washable writing surface.

Solvent-based chalboard paint cannot be sold outside the United States due to product labeling restrictions.

This paint adheres to most types of plastic without sanding or priming.

Mark traffic lanes, parking lots, and factory floors.

Acrylic paint withstands abrasion in high-traffic areas. It’s also known as latex paint.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Use coatings in an aerosol can to cover hard-to-reach places and to touch up worn-out areas.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Rubber coatings withstand salt and acids. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life of the coating. Apply topcoat to give coated surfaces a glossy finish that resists fading.

PVC plastic coatings can be used on nearly any surface, including rubber. They withstand salt, acids, alkalies, and gasoline. They also resist UV light, so they won’t lose their color when exposed to sunlight over long periods of time.

Coatings that cannot be sold outside of the United States do not meet product labeling requirements.

Primers and topcoats cannot be sold outside of the United States due to product regulations.

VOC (Volatile Organic Compounds) regulations restrict sales to the listed jurisdictions/areas.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures. Coatings resist acids, alkalies, fuels, and solvents, as well as temperatures as low as -40° F once cured. They can also be used as an adhesive for Viton® gaskets, O-rings, and seals.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight.

Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance. Polyurethane coatings withstand impact and abrasion. Apply with a brush, roller, or sprayer.

Protect sensitive electronic parts, enclosures, and prototypes from electromagnetic interference (EMI) and radio frequency interference (RFI) with these coatings. Also known as conductive paint, these coatings block EMI and RFI from disrupting electrical, data, and radio signals, which can cause circuit malfunctioning and data loss.

For best adhesion, apply to clean, oil-free surfaces. If applying to highly chemical-resistant plastics such as PVC and PTFE, use a primer first.

Carbon acrylic coatings are made with ground carbon powder mixed with acrylic. They're best for RFI and low-frequency shielding applications, such as protecting jumpers and resistors in initial prototypes, since they're not as conductive as nickel and silver acrylic coatings. They don’t contain metal, so they’re also great for electronics where metal-filled coatings could cause malfunction, such as metal detectors.

Coatings that cannot be sold to the listed areas are restricted by product labeling requirements.

These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings. Choose gray for light-color topcoats; red for medium-color topcoats; and black for dark topcoats.

These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.