These tanks are built to ASME specifications. Use them with your paint sprayer for high-volume application of paint and coatings.

Stainless steel tank is more corrosion resistant than the zinc-plated steel tank.

Attach one of these large-capacity tanks to your paint sprayer for high-volume application of paint and coatings.

These efficient hand-held sprayers produce low overspray, so they waste less paint than our other electric sprayers. Use them to spray thin paint, stains, and lacquers. They have an adjustable spray head so you can change the size and shape of your spray.

Keep paint spray guns in good condition. Kits have different-sized brushes to clean internal and external parts, cleaning needles to clean air cap holes, and a pick to remove seals and gaskets.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Rubber coatings withstand salt and acids. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life of the coating. Apply topcoat to give coated surfaces a glossy finish that resists fading.

PVC plastic coatings can be used on nearly any surface, including rubber. They withstand salt, acids, alkalies, and gasoline. They also resist UV light, so they won’t lose their color when exposed to sunlight over long periods of time.

Coatings that cannot be sold outside of the United States do not meet product labeling requirements.

Primers and topcoats cannot be sold outside of the United States due to product regulations.

VOC (Volatile Organic Compounds) regulations restrict sales to the listed jurisdictions/areas.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Use coatings in an aerosol can to cover hard-to-reach places and to touch up worn-out areas.

Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures. Coatings resist acids, alkalies, fuels, and solvents, as well as temperatures as low as -40° F once cured. They can also be used as an adhesive for Viton® gaskets, O-rings, and seals.

Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water. Use them in exterior, above-grade vertical surfaces to minimize deterioration and to prevent salt deposits and surface stains. Apply with a brush or sprayer.

Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.

These silicone-based coatings renew leather and vinyl surfaces and protect against UV damage, dirt, and ozone. Spray them on, allow them to sink in, and buff away excess with a cloth.

These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion. They're designed for outdoor use, but can also be used indoors in well-ventilated areas.

Coatings with 99% zinc withstand temperatures up to 750° F.

Coatings that cannot be sold to the listed regions are restricted by product labeling and/or VOC regulations.

These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F. Apply with a brush, roller, or sprayer.

Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance. Polyurethane coatings withstand impact and abrasion. Apply with a brush, roller, or sprayer.

Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting. This hose is made of a specially formulated EPDM that dissipates static, so paint and powder won’t attract to the hose’s surface. It also prevents the generation of sparks when the surface of the hose is touched. Reinforced with yarn, this hose is flexible and durable.

For technical drawings and 3-D models, click on a part number.

Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion. It adheres to metal, plastic, vinyl, rubber, and composite surfaces.

Liquid rubber is moisture and crack resistant. Use it as a seal on plastic tape. Allow 20 minutes between coats.

Liquid that cannot be sold outside the United States is restricted by product labeling requirements.