Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

These sprayers have a more durable construction than our other plastic hand-pump sprayers.

Carry these sprayers comfortably on your back using the padded shoulder straps.

Spray thin liquids evenly without propellant. Fill the sprayer and pressurize with compressed air.

Wheel these electric-powered sprayers wherever needed to disinfect surfaces and equipment in bathrooms, schools, gyms, and worksites without any manual pumping.

Disinfect bathrooms, desks, doors, and other small areas and items with these portable sprayers.

An electrostatic charging ring in these backpack sprayers gives spraying liquids a positive charge, so that disinfectant or insecticide will cling to surfaces for an even coating.

The nozzle on these foamers injects air to make cleaners and disinfectants foam as you spray them.

These spray bottles resist harsh chemicals and solvents.

Unlike standard spray bottles, these dispense oil and other high-viscosity liquids without clogging.

Dispense up to three times more liquid per stroke than other spray bottles.

No funnel needed to fill these bottles—a wide mouth allows quick refilling without spilling.

Identify contents quickly with labels written in English and Spanish.

These dispensers have a reservoir and controls for coolant flow.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

These dispensers have a reservoir for recirculating coolant.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Use with Snap-Loc hose to assemble and disassemble components.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

Use as a lever to adjust the angle of coolant streams.

Press these nozzles into unthreaded holes.

Deliver a mist of oil using shop air.

These dispensers have an opening for filling without removing the nozzle.

Use suction to remove old lubricant from gear boxes and transmissions.

Clamp this applicator around control cables to lubricate them with minimal mess.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

Start greasing faster than standard grease guns and continue with the high output of a lever grip.

Use these guns to clean as well as apply chemicals and solvents.

These durable wash guns are typically used for frequent washdowns and cleanup.

These wash guns have a high maximum pressure, so use them with pressure washers and high-pressure spray systems.

Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.

Attach one of these brooms to a garden hose to sweep away dirt and dust—its water jets turn your hose water into pressurized water for quick, easy cleaning.

Connect these cleaners to existing steam lines to remove dirt, grease, and heavy oils from most surfaces.

Clean and sanitize surfaces with the power of steam—with or without detergents and other chemicals.

Replace damaged and worn parts on Binks paint sprayers.

Minimize waste of paint and coatings—these sprayers produce less overspray than our other air-powered sprayers.

Replace the disposable spray heads on these guns after each use for the performance of a new spray gun without having to clean them. High-volume/low-pressure sprayers produce less overspray than other air-powered sprayers to minimize paint waste.

Attach a large-capacity tank to your paint sprayer for high-volume application of paint and coatings.

These cups let you see how much paint is left. Keep extras ready for easy color changes while spraying.

For high-volume jobs, these sprayers apply paint and coatings at more than four times the rate of our light duty electric paint sprayers. They have a durable motor that automatically adjusts to changes in pressure.

Spray paint and light coatings at twice the rate of our light duty electric paint sprayers. These sprayers are portable and have a lightweight spray gun for big projects.

These air brushes dispense a set amount of paint as you spray, providing a uniform line thickness.

Extend the reach of your faucet with these flexible sprayers.

These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.

A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.

These nozzles have replaceable tips that are removable with a quarter-turn.

Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.

Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.

With a unique internal and external design, these nozzles let particles in liquid pass through instead of clogging.

Often used in sanitary environments, these nozzles are clog-resistant and have no moving parts to maintain.

Certified by 3-A to meet sanitary design standards, these stationary nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.

Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles.

A check valve prevents the nozzle from dripping when it is turned off.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

A unique internal and external design lets particles in liquid pass through instead of clogging, leading to higher volumes of mist.

These nozzles produce a flat, thin spray pattern.

The superior cleaning ability of a solid stream has been combined with rotating spray action for excellent coverage.

Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.