About Hose
More
Quick-Disconnect Wash Gun Extensions
Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun. These extensions have a threaded coupling for your wash gun and a quick-disconnect coupling for your nozzle. Made of zinc-plated steel (with brass and stainless steel couplings), they’re durable and have good corrosion resistance. They’re commonly called extension wands.
Nozzles are required, but not included; see quick-disconnect spray nozzles.
For technical drawings and 3-D models, click on a part number.
Quick-Disconnect Connection | Pipe Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Length | Maximum Pressure, psi | Material | Coupling Size | Gender | Material | Thread Type | Thread Size  | Thread Pitch, mm | Gender | Material | Maximum Temperature, °F | Each | |
| 20" | 4,500 | Zinc-Plated Steel | 1/4 | Female | Brass | Metric | M22 | 2.5 | Male | Stainless Steel | 140° | 0000000 | 000000 |
| 33" | 4,500 | Zinc-Plated Steel | 1/4 | Female | Brass | Metric | M22 | 2.5 | Male | Stainless Steel | 140° | 0000000 | 00000 |
Machine-Mount Coolant Nozzles with Threaded Connection
These nozzles handle coolant pressure up to 150 psi. Push on the nozzle to adjust the angle of the coolant stream.
Material | Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Spray Pattern | Orifice Dia. | Lg. | Tip Lg. | Wd. | Body | Ball | Tip | Max. Flow Rate, gpm | Max.Temp., °F | Features | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | ||||||||||||||
Metric Male | ||||||||||||||
| M8 × 1 mm | Stream | 0.11" | 0.69" | 0.25" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 00000000 | 000000 | 000000 |
| M8 × 1 mm | Stream | 0.11" | 0.69" | 0.5" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
| M8 × 1 mm | Stream | 0.11" | 0.69" | 1.25" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
| M8 × 1 mm | Stream | 0.16" | 0.69" | __ | 0.50" | Acetal Plastic | Stainless Steel | __ | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
| M8 × 1 mm | Stream | 0.16" | 0.69" | 0.5" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
| M8 × 1 mm | Stream | 0.16" | 0.69" | 1.25" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
| M10 × 1 mm | Stream | 0.16" | 0.82" | 0.5" | 0.63" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
| M10 × 1 mm | Stream | 0.16" | 0.82" | 1.25" | 0.63" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
High-Pressure Machine-Mount Coolant Nozzles with Ball-Socket Connection
For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi. They snap into the sockets on CNC machines and swivel for positioning.
Styles A and B can be cut to any length and bent in any direction. Style A has one nozzle. Style B has two nozzles.
Style C can be used with a tip extension (sold separately) to direct coolant straight to the cutting edge.
For technical drawings and 3-D models, click on a part number.
Material | Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Socket Dia. | Gender | Spray Pattern | Orifice Dia. | Lg. | Tip Lg. | Tip Thread Size | Body | Tip | Max. Flow Rate, gpm | Max. Temp., °F | Includes | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | |||||||||||||||
| A | 10mm | Male | Stream | 0.12" | 6" | 5.59" | __ | Brass | Copper | 6.5 | 300° | __ | 0000000 | 000000 | 000000 |
| A | 12mm | Male | Stream | 0.18" | 6" | 5.55" | __ | Brass | Copper | 14 | 300° | __ | 0000000 | 00000 | 00000 |
| A | 14mm | Male | Stream | 0.18" | 6" | 5.44" | __ | Brass | Copper | 14 | 300° | __ | 0000000 | 00000 | 00000 |
| A | 15mm | Male | Stream | 0.18" | 6" | 5.41" | __ | Brass | Copper | 14 | 300° | __ | 0000000 | 00000 | 00000 |
| B | 12mm | Male | Stream | 0.12" | 6" | 5.51" | __ | Brass | Copper | 6.5 | 300° | __ | 0000000 | 00000 | 00000 |
| B | 14mm | Male | Stream | 0.12" | 6" | 5.43" | __ | Brass | Copper | 6.5 | 300° | __ | 0000000 | 00000 | 00000 |
| B | 15mm | Male | Stream | 0.12" | 6" | 5.39" | __ | Brass | Copper | 6.5 | 300° | __ | 0000000 | 00000 | 00000 |
| C | 12mm | Male | Stream | 0.2" | 0.6" | 0.24" | M5 | Brass | Brass | 14 | 300° | Threaded Plug | 0000000 | 00000 | 00000 |
| C | 14mm | Male | Stream | 0.24" | 0.71" | 0.31" | M6 | Brass | Brass | 25.2 | 300° | Threaded Plug | 0000000 | 00000 | 00000 |
| C | 15mm | Male | Stream | 0.24" | 0.77" | 0.31" | M6 | Brass | Brass | 25.2 | 300° | Threaded Plug | 0000000 | 00000 | 00000 |
| D | 12mm | Male | Stream | 0.22" | 0.39" | __ | __ | Brass | Brass | 25.2 | 300° | __ | 0000000 | 00000 | 0000 |
| D | 14mm | Male | Stream | 0.22" | 0.47" | __ | __ | Brass | Brass | 25.2 | 300° | __ | 0000000 | 00000 | 00000 |
| D | 15mm | Male | Stream | 0.22" | 0.51" | __ | __ | Brass | Brass | 25.2 | 300° | __ | 0000000 | 00000 | 00000 |
| E | 12mm | Male | Stream | 0.16" | 0.75" | 0.36" | __ | Brass | Brass | 14 | 300° | __ | 0000000 | 00000 | 00000 |
| E | 14mm | Male | Stream | 0.16" | 0.84" | 0.36" | __ | Brass | Brass | 14 | 300° | __ | 0000000 | 00000 | 00000 |
| E | 15mm | Male | Stream | 0.16" | 0.87" | 0.36" | __ | Brass | Brass | 14 | 300° | __ | 0000000 | 00000 | 00000 |
Machine-Mount Coolant Nozzles with Ball-Socket Connection
These nozzles handle coolant pressure up to 150 psi. Snap them into the sockets on CNC machines. To aim the coolant stream, insert a hex wrench or similar tool into the orifice and rotate the nozzle tip.
For technical drawings and 3-D models, click on a part number.
Material | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Socket Dia. | Gender | Spray Pattern | Orifice Dia. | Lg. | Tip Lg. | Body | Tip | Max. Flow Rate, gpm | Max.Temp., °F | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | ||||||||||||
| 12mm | Male | Stream | 0.11" | 1.10" | 0.25" | Acetal Plastic | Stainless Steel | 3.6 | 160° | 0000000 | 000000 | 000000 |
| 14mm | Male | Stream | 0.16" | 1.20" | 0.25" | Acetal Plastic | Stainless Steel | 7.6 | 160° | 0000000 | 00000 | 00000 |
| 15mm | Male | Stream | 0.16" | 1.20" | 0.25" | Acetal Plastic | Stainless Steel | 7.6 | 160° | 0000000 | 00000 | 00000 |
Machine-Mount Coolant Nozzles with Press-In Connection
Press these nozzles into unthreaded holes. Holes must meet the specified tolerance to ensure a secure fit. To aim the coolant stream, insert a hex wrench or similar tool into the orifice and rotate the nozzle tip.
Tip extensions (sold separately) thread into the orifice to direct coolant straight to the cutting edge.
For technical drawings and 3-D models, click on a part number.
For Hole | Material | Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Dp. | Gender | Spray Pattern | Orifice Dia. | Lg. | Tip Lg. | Tip Thread Size | Body | Tip | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | ||||||||||||||||
| 12 mm | 0 mm-0.043 mm | 10.5 mm | Male | Stream | 0.2" | 0.41" | 0.1" | M5 | Acetal Plastic | Stainless Steel | 7.6 | 150 | 160° | 000000 | 000000 | 000000 |
| 15 mm | 0 mm-0.043 mm | 9 mm | Male | Stream | 0.24" | 0.35" | 0.12" | M6 | Acetal Plastic | Stainless Steel | 14.4 | 150 | 160° | 000000 | 00000 | 00000 |
Coolant Hose and Nozzle Adapters
Snap these adapters into the ball-socket connections on CNC machines to connect threaded coolant hose and nozzles to coolant supply ports.
For technical drawings and 3-D models, click on a part number.
Pipe Connection | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Ball Socket Dia. | Gender | Size | Thread Type | Gender | Lg. | Body Material | Max. Pressure, psi | Max. Temp., °F | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | |||||||||||
| 12mm | Male | 1/8 | NPT, BSPT | Female | 0.91" | Acetal Plastic | 150 | 160° | 0000000 | 00000 | 00000 |
| 14mm | Male | 1/8 | NPT, BSPT | Female | 0.38" | Acetal Plastic | 150 | 160° | 0000000 | 0000 | 0000 |
| 15mm | Male | 1/8 | NPT, BSPT | Female | 0.43" | Acetal Plastic | 150 | 160° | 0000000 | 0000 | 0000 |
Static-Dissipative Air Hose
- Temperature Range: -20° to 210° F
- Material: EPDM Rubber
- Color: Blue
- Compatible Hose Fittings: Barbed
Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting. This hose is made of a specially formulated EPDM that dissipates static, so paint and powder won’t attract to the hose’s surface. It also prevents the generation of sparks when the surface of the hose is touched. Reinforced with yarn, this hose is flexible and durable.
For technical drawings and 3-D models, click on a part number.