McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    20 Products

    Food and Beverage Penetrating Lubricants

    For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 for incidental food contact. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.
    Silicone Rubber Additive—Lubricants with silicone rubber are clear, have excellent water resistance, and can be used on rubber. Not for use on painted surfaces.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Temp. Range,
    ° F
    Food Industry
    Std.
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon LU 210 Food Grade Dry Silicone
    10Aerosol CanSilicone Rubber
    		-40 to 450NSF Registered H1
    		1155K41000000121155K420000000
     
    Sprayon LU 700 Food Grade Machinery
    10Aerosol Can—20 to 450NSF Registered H1
    		1155K1200000121155K122000000
     

    Food and Beverage Dry-Film Lubricants

    Image of Product. Front orientation. Dry-Film Lubricants. Food and Beverage Dry-Film Lubricants.
    Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.
    Silicone Rubber Additive—Lubricants with silicone rubber can be used with plastic.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Temp.,
    ° F
    Food Industry Std.
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon LU 211 Food Grade Dry Silicone
    13 1/4Aerosol CanSilicone Rubber
    		-40 to 450FDA Compliant 21 CFR 178.3570, NSF Registered H11155K36000000121155K370000000
     

    High-Pressure Food and Beverage Penetrating Lubricants

    Image of Product. Front orientation. Penetrating Lubricants. High-Pressure Food and Beverage Penetrating Lubricants.
    Formulated to handle high loads and temperatures, these lubricants are NSF registered H1 for incidental food contact. Use them with chain and gears in food-processing and preparation areas and with hinges on ovens. They cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment. Lubricants go on as a foam to cling to parts and resist dripping.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Temp. Range,
    ° F
    Food Industry
    Std.
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon LU 205 Food Grade Chain
    15Aerosol CanPTFE
    		15 to 635NSF Registered H1
    		2304N11000000122304N120000000
     

    Mold-Release Lubricants

    Image of Product. Front orientation. Mold-Release Lubricants. Mold-Release Lubricants, Aerosol Can.

    Aerosol

    Can

    Apply these lubricants to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing. They leave a residue, so they shouldn’t be used on parts that need to be painted.
    Sprayon MR 315 Urethane & Styrene Silicone Release Agent—Sprayon MR 315 Urethane & Styrene Silicone Release Agent can be used with sensitive plastic, such as styrene and urethane.
    Silicone Rubber Additive—Lubricants with silicone rubber can be used with rubber and plastic.
    Container
    Temperature,
    ° F
    Each
    Package
    Net Weight,
    oz.
    Type
    Additive
    Min.
    Max.
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon MR 315 Urethane & Styrene Silicone Release Agent
    12Aerosol CanSilicone Rubber
    		-40550Plastic, Rubber1409K34000000121409K3420000000
     

    No-Residue Mold-Release Lubricants

    Image of Product. Front orientation. Mold-Release Lubricants. No-Residue Mold-Release Lubricants, Aerosol Can.

    Aerosol

    Can

    Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.
    PTFE Additive—Lubricants with PTFE create a long-lasting film that withstands high temperatures.
    Silicone Rubber Additive—Lubricants with silicone rubber have a small amount of silicone for lubricity, but still allow you to paint molded parts without cleaning first. Use these lubricants to release large, intricate, or difficult-to-release parts.
    Container
    Temperature,
    ° F
    Each
    Package
    Net Weight,
    oz.
    Type
    Additive
    Min.
    Max.
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon MR 309 Paintable Release Agent
    12Aerosol CanSilicone Rubber
    		-40550Plastic1409K33000000121409K3310000000
     
    Sprayon MR 311 Dry Film Release Agent
    12Aerosol CanPTFE
    		-50575Plastic, Rubber1409K4200000121409K422000000
     

    Penetrating Lubricants

    Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
    Sprayon
    Image of Product. Front orientation. Penetrating Lubricants. Penetrating Lubricants, Sprayon, Aerosol Can.
    Image of Attribute. Front orientation. Sprayon. Penetrating Lubricants.

    Aerosol

    Can

    LU 103 Rust Breaker—Sprayon LU 103 Rust Breaker quickly dissolves rust, leaving behind a light film that prevents corrosion.
    Container
    Temp.,
    ° F
    Each
    Package
    Net Wt.,
    oz.
    Type
    Min.
    Max.
    Food Industry
    Std.
    Each
    Pkg.
    Qty.
    Pkg.
    LU 103 Rust Breaker
    10Aerosol Can-20550NSF Registered H2
    		10615K230000001210615K2320000000
     

    Dry-Film Lubricants for Chain

    Image of Product. Front orientation. Dry-Film Lubricants. Dry-Film Lubricants for Chain, Aerosol Can.

    Aerosol

    Can

    A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.
    Graphite Additive—Lubricants with graphite have good heat and excellent wear resistance.
    PTFE Additive—Lubricants with PTFE can be used with most plastics and are chemically inert.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Temp.,
    ° F
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon LU 204 Dry-Film Graphite Lubricant
    10Aerosol CanGraphite-40 to 8501289K17000000121289K1750000000
     
    Sprayon LU 708 High Performance Dry-Film Lubricant
    10Aerosol CanPTFE
    		-40 to 5701130K1500000121130K153000000
     
    back to top