A spring-loaded bushing keeps your door from vibrating open. These locks combine the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn cam lock. However, they don't close as tightly as tight-hold locks. They open and close with a slotted screwdriver, so they’re great if you want a simple keying system for your enclosure. These locks help sealed enclosures maintain an IP65 level of protection by preventing water, dirt, and dust from getting in through the lock. All come with multiple cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery.

Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. Locks with multiple latching distances include multiple cams, so you can change the fixed latching distance.

Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.

Locks with a roller or protected cam rotate more smoothly than those with other straight and offset cams, making them easier to open and close. The cam won't scrape paint or metal chips off the frame that can damage items in the enclosure. The roller cam also compresses a bit to help minimize rattling from vibration.

Locks with a curved cam push closed without a tool or key. When pushed, the curved design lets the cam pivot slightly around the strike plate, securing the lock. To open them, turn the latch—the cam springs back so it's ready to be pushed closed again.

Stainless steel and plastic locks are more corrosion resistant than zinc locks, so they’re best for areas that are constantly exposed to moisture. Plastic locks are also nonconductive and lighter in weight. However, they’re easier to drill into or tamper with than the metal locks.

Style B locks have a low-profile design, so they won’t snag straps or other items passing by. They project further into the enclosure than other locks with a fixed latching distance. All meet EN 45545 standards for flammability.

Style C locks have a pull tab that makes it easier to open doors than locks without a tab.

Style E locks meet EN 45545 standards for flammability.

IP or NEMA rated locks help keep your sealed enclosure's contents safe from dust and water damage. This helps maintain your enclosure's IP or NEMA rating for washdowns or brief submersions.

For technical drawings and 3-D models, click on a part number.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed. To latch, turn the knob a quarter-turn to draw the cam against the door or drawer surface. A quarter-turn in the opposite direction releases the tension and opens the door or drawer.

For technical drawings and 3-D models, click on a part number.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed. To latch, turn the knob a quarter-turn to draw the cam against the door or drawer surface. A quarter-turn in the opposite direction releases the tension and opens the door or drawer.

Latches with a serrated-spring cam hold tighter than those with a smooth-spring cam, making them best for applications with vibration.

For technical drawings and 3-D models, click on a part number.