ISO 8752 Spring Pins | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Material

Shaft Type

Hole Diameter

Wall Thickness

Pin Type

Specifications Met

Performance

Passivation

End Type

Double Shear Breaking Strength

Fastener Head Type

Minimum Hardness

DFARS Specialty Metals

RoHS

Export Control Classification Number (ECCN)

REACH

Finish

Number of Pieces

Container Features

218 Products

Slotted Spring Pins

End View

Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

	Lg., mm	For Hole Dia., mm	Wall Thk., mm	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel





				1 mm Diameter
				4	1	0.2	150	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
				6	1	0.2	150	Rockwell C42	ISO 8752	100	000000000	0000
				8	1	0.2	150	Rockwell C42	ISO 8752	100	000000000	0000



						1.5 mm Diameter
						4	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
						5	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
						6	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
						8	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
						10	1.5 to 1.6	0.3	350	Rockwell C42	ISO 8752	100	000000000	00000
						12	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000



								2 mm Diameter
								4	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	0000
								5	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								6	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								8	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								10	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								12	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								14	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								16	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								18	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								20	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	00000
								22	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	0000
								24	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	00000
								30	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	00000



										2.5 mm Diameter
										10	2.5 to 2.6	0.5	950	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
										14	2.5 to 2.6	0.5	950	Rockwell C42	ISO 8752	100	000000000	0000
										20	2.5 to 2.6	0.5	950	Rockwell C42	ISO 8752	100	000000000	00000
										24	2.5 to 2.6	0.5	950	Rockwell C42	ISO 8752	100	000000000	0000
										30	2.5 to 2.6	0.5	950	Rockwell C42	ISO 8752	100	000000000	00000



												3 mm Diameter
												4	3 to 3.65	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												6	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												8	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												10	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												12	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												14	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												16	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												18	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												20	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
												22	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	0000
												24	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	0000
												26	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	0000
												28	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	0000
												30	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	00000
												36	3 to 3.1	0.6	1,400	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
40												3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	00000



		3.5 mm Diameter
		10	3.5 to 3.65									0.8	2,000	Rockwell C42	ISO 8752	100	000000000	0000
		20	3.5 to 3.65									0.8	2,000	Rockwell C42	ISO 8752	100	000000000	0000
		30	3.5 to 3.65									0.8	2,000	Rockwell C42	ISO 8752	100	000000000	00000



				4 mm Diameter
				6								4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
				8	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
				10	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
				12	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
				14	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
				16	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
				18	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
				20	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
				22	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
				24	4 to 4.2							0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
				26	4 to 4.2	0.8						2,500	Rockwell C42	ISO 8752	100	000000000	00000
				30	4 to 4.2	0.8	2,500					Rockwell C42	ISO 8752	100	000000000	00000
				32	4 to 4.2	0.8	2,500					Rockwell C42	ISO 8752	100	000000000	00000
				36	4 to 4.2	0.8	2,500					Rockwell C42	ISO 8752	100	000000000	00000
				40	4 to 4.2	0.8	2,500					Rockwell C42	ISO 8752	100	000000000	00000
				45	4 to 4.2	0.8	2,500					Rockwell C42	ISO 8752	100	000000000	00000
				50	4 to 4.2	0.8	2,500					Rockwell C42	ISO 8752	50	000000000	00000



						5 mm Diameter
						10	5 to 5.2					1	3,900	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
						12	5 to 5.2					1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						14	5 to 5.2					1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						16	5 to 5.2					1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						18	5 to 5.2					1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						20	5 to 5.2					1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						22	5 to 5.2					1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						24	5 to 5.2	1				3,900	Rockwell C42	ISO 8752	100	000000000	00000
						26	5 to 5.2	1	3,900			Rockwell C42	ISO 8752	100	000000000	00000
						28	5 to 5.2	1	3,900			Rockwell C42	ISO 8752	100	000000000	00000
						30	5 to 5.2	1	3,900			Rockwell C42	ISO 8752	100	000000000	00000
						32	5 to 5.2	1	3,900			Rockwell C42	ISO 8752	100	000000000	00000
						36	5 to 5.2	1	3,900			Rockwell C42	ISO 8752	100	000000000	00000
						40	5 to 5.2	1	3,900			Rockwell C42	ISO 8752	100	000000000	00000
						45	5 to 5.2	1	3,900			Rockwell C42	ISO 8752	100	000000000	00000
						50	5 to 5.2	1	3,900			Rockwell C42	ISO 8752	50	000000000	00000



								6 mm Diameter
								12	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
								14	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
								16	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
								20	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
								24	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
								26	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
								30	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
								36	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
								40	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
								45	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
								50	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
								60	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	25	000000000	0000
								100	6 to 6.2	1.2	5,800	Rockwell C42	DIN 1481, ISO 8752	10	000000000	00000



								8 mm Diameter
								22	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
								26	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
								30	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
		40						8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
		50	8 to 8.25					1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000
		55	8 to 8.25					1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000
		60	8 to 8.25					1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000
		100	8 to 8.25					1.5	9,600	Rockwell C42	DIN 1481, ISO 8752	5	000000000	0000



								10 mm Diameter
								24	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
								30	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
								36	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
								40	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
								50	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
								60	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	10	000000000	00000
								80	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	10	000000000	00000
								100	10 to 10.3	2	15,700	Rockwell C42	DIN 1481, ISO 8752	5	000000000	00000



										12 mm Diameter
				30						12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000
				40	12 to 12.3					2.5	23,000	Rockwell C42	ISO 8752	10	000000000	00000
				50	12 to 12.3					2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000
				60	12 to 12.3					2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000

				Corrosion-Resistant 18-8 Stainless Steel





												1 mm Diameter
												4	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	0000
												6	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	0000
												8	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	0000



														1.5 mm Diameter
														4	1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	100	000000000	0000
														5	1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	100	000000000	0000
						6								1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
						8	1.5 to 1.6							0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
						10	1.5 to 1.6							0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
						12	1.5 to 1.6							0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000



														2 mm Diameter
														4	2 to 2.1	0.4	Not Rated	Not Rated	ISO 8752	100	000000000	0000
														5	2 to 2.1	0.4	Not Rated	Not Rated	ISO 8752	100	000000000	0000
														6	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														8	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														10	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														12	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														14	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														16	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
18														2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
20	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
22	2 to 2.1													0.4	Not Rated	Not Rated	ISO 8752	25	000000000	0000
24	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
30	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000



														2.5 mm Diameter
														10	2.5 to 2.6	0.5	Not Rated	Not Rated	ISO 8752	25	000000000	0000
														14	2.5 to 2.6	0.5	Not Rated	Not Rated	ISO 8752	25	000000000	0000
														20	2.5 to 2.6	0.5	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		30												2.5 to 2.6	0.5	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000



														3 mm Diameter
														4	3 to 3.65	0.6	Not Rated	Not Rated	ISO 8752	100	000000000	0000
														6	3 to 3.1	0.6	Not Rated	Not Rated	ISO 8752	100	000000000	0000
														8	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														10	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														12	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														14	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														16	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														18	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
								20						3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								22	3 to 3.1					0.6	Not Rated	Not Rated	ISO 8752	10	000000000	0000
								24	3 to 3.1					0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								26	3 to 3.1					0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								28	3 to 3.1					0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								30	3 to 3.1					0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								40	3 to 3.1					0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000



								3.5 mm Diameter
								10	3.5 to 3.65					0.75	Not Rated	Not Rated	DIN 1481, ISO 8752	50	000000000	00000
								20	3.5 to 3.6	0.7				Not Rated	Not Rated	ISO 8752	50	000000000	0000
								30	3.5 to 3.6	0.7	Not Rated			Not Rated	ISO 8752	50	000000000	0000



										4 mm Diameter
										8	4 to 4.2			0.8	Not Rated	Not Rated	ISO 8752	10	000000000	0000
										10	4 to 4.2			0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										12	4 to 4.2	0.8		Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										14	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										16	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										18	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										20	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										22	4 to 4.2	0.8	Not Rated	Not Rated	ISO 8752	10	000000000	0000
										24	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										26	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						30				4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						32	4 to 4.2			0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						36	4 to 4.2			0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						40	4 to 4.2			0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						45	4 to 4.2			0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						50	4 to 4.2			0.8	Not Rated	Not Rated	ISO 8752	5	000000000	0000



										5 mm Diameter
										10	5 to 5.2	1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										12	5 to 5.2	1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										14	5 to 5.2	1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
										16	5 to 5.2	1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										18	5 to 5.2	1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
										20	5 to 5.2	1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
										22	5 to 5.2	1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
24										5 to 5.2	1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
26	5 to 5.2									1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
28	5 to 5.2									1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
30	5 to 5.2									1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
32	5 to 5.2									1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
36	5 to 5.2									1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
40	5 to 5.2									1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
45	5 to 5.2									1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
50	5 to 5.2	1								Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000



		6 mm Diameter
		12	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		14	6 to 6.2							1.2	Not Rated	Not Rated	ISO 8752	10	000000000	0000
		16	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		20	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		24	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		26	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		30	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		36	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
		40	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		45	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
		50	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000
		60	6 to 6.2							1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000



				8 mm Diameter
				22						8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
				26	8 to 8.25					1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
				30	8 to 8.25					1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				40	8 to 8.25					1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000
				50	8 to 8.25					1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
				55	8 to 8.25					1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
				60	8 to 8.25					1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
				100	8 to 8.25			1.5		Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000



								10 mm Diameter
								24	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
								30	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
								36	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
								40	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
								50	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
								60	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
								80	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
								100	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000

Slotted Spring Pin Assortments

Keep a range of sizes on hand to secure a variety of parts. Squeeze these pins into holes and they expand slightly, creating tension to stay in place. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Zinc-Plated Spring Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.

	No. of Pieces	Container Type	Specs. Met		Each
Zinc-Plated Spring Steel


	2 mm to 6 mm Dia.	520	Plastic Box	ISO 8752	000000000	0000000

	Corrosion-Resistant 18-8 Stainless Steel


			2 mm to 6 mm Dia.	520	Plastic Box	ISO 8752	000000000	000000