Extension Springs with Loop Ends
As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch or millimeter of extension.
Zinc-plated springs have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Load, lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Wire Dia. | Extended Lg. @ Max. Load | Min. | Max. | Spring Rate, lbs./in.  | Material | Pkg. Qty. | Pkg. | |
7.5" Lg. | |||||||||
| 1" | 0.105" | 11.17" | 7.52 | 23.43 | 4.34 | Zinc-Plated Spring-Tempered Steel | 1 | 00000000 | 00000 |
| 1.125" | 0.091" | 15.2" | 3.16 | 14.1 | 1.42 | Zinc-Plated Spring-Tempered Steel | 1 | 00000000 | 0000 |
| 1.25" | 0.095" | 24.04" | 2.33 | 25.86 | 1.4 | Music-Wire Steel | 1 | 00000000 | 00000 |
| 1.25" | 0.115" | 17.92" | 3.96 | 44.03 | 3.8 | Music-Wire Steel | 1 | 00000000 | 00000 |
| 1.25" | 0.135" | 14.5" | 6.18 | 68.62 | 8.9 | Music-Wire Steel | 1 | 00000000 | 00000 |
| 1.25" | 0.148" | 13.04" | 7.95 | 88.38 | 14.5 | Music-Wire Steel | 1 | 00000000 | 00000 |
| 1.5" | 0.125" | 19.13" | 4.2 | 46.64 | 3.6 | Music-Wire Steel | 1 | 00000000 | 00000 |
| 1.5" | 0.148" | 15.22" | 6.7 | 74.49 | 8.8 | Music-Wire Steel | 1 | 00000000 | 00000 |
| 1.5" | 0.177" | 12.44" | 10.97 | 121.9 | 22.5 | Music-Wire Steel | 1 | 00000000 | 00000 |
| 2" | 0.207" | 12.73" | 12.88 | 143.12 | 22 | Music-Wire Steel | 1 | 00000000 | 00000 |
Corrosion-Resistant Extension Springs with Loop Ends
Made of stainless steel, these springs are more corrosion resistant than steel springs. They're also easier to extend than steel springs. As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch or millimeter of extension.
302 stainless steel springs have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Extension Springs with Hook Ends
As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch or mm of extension.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Extension Springs with Hook Ends
Made of stainless steel, these springs are more corrosion resistant than steel springs. They're also easier to extend than steel springs. As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch of extension or, for metric springs, millimeter of compression.
302 stainless steel springs have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Load, lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Wire Dia. | Extended Lg. @ Max. Load | Min. | Max. | Spring Rate, lbs./in. | Material | Pkg. Qty. | Pkg. | |
7.5" Lg. | |||||||||
| 1.25" | 0.095" | 24.04" | 1.94 | 21.54 | 1.166 | 302 Stainless Steel | 1 | 00000000 | 000000 |
| 1.25" | 0.135" | 14.5" | 5.15 | 57.16 | 7.414 | 302 Stainless Steel | 1 | 00000000 | 00000 |
| 1.25" | 0.148" | 13.04" | 6.62 | 73.62 | 12.079 | 302 Stainless Steel | 1 | 00000000 | 00000 |
| 1.5" | 0.148" | 15.22" | 5.58 | 62.05 | 7.33 | 302 Stainless Steel | 1 | 00000000 | 00000 |
Overload-Prevention Extension Springs
These zinc-plated steel springs have mild corrosion resistance. All have drawbars to prevent overextending, which can cause failure.
As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch of extension.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Overload-Prevention Extension Springs
Made of stainless steel, these springs are more corrosion resistant than steel extension springs. All have drawbars to prevent overextending, which can cause failure.
As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch of extension.
For technical drawings and 3-D models, click on a part number.
Load, lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | OD | Wire Dia. | Extended Lg. @ Max. Load | Min. | Max. | Spring Rate, lbs./in. | Material | End Type | Each | |
| 7.5" | 0.875" | 0.105" | 10.25" | Not Rated | 49.5 | 18 | 302 Stainless Steel | Loop | 0000000 | 000000 |
Linear Wave Springs
Similar to disc springs, these linear springs are good for absorbing vibration and filling in gaps along the length of an object. Their thin profile allows them to fit in tight spots.
For technical drawings and 3-D models, click on a part number.
Hydraulic Gate Closers
With a hydraulic mechanism, these are the smoothest and quietest closers we offer for gates. They are reversible for right or left door-swing directions.
Aluminum, Stainless Steel, Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Length | Width | Projection | For Door Swing Direction | Opening/Closing Action | Door Mount Opening Direction | Capacity, lbs. | Range of Motion | Mounting Hardware Included | Each | |
| 7 1/2" | 13" | 2 1/2" | Reversible | Free Moving | Opens In | 150 | 90° | Yes | 0000000 | 000000 |