Sprinkler Centrifugal Pumps

Filter by

Discharge Pipe Size

For Use With

Voltage

Maximum Flow Rate

Intake Pipe Size

Maximum Feet of Head

Power

Electrical Phase

Housing Material

Impeller Material

Flow Rate @ 10 Feet of Head

Maximum Pressure

Discharge Connection

Maximum Temperature

Priming Type

Frequency

For Pump Manufacturer

Intake Connection

Export Control Classification Number (ECCN)

2B350

EAR99

DFARS Specialty Metals

REACH

RoHS

Compliant with Exemptions

Not Compliant

For Pump Model Number

For Pump Part Number

Kit Number

136 Products

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

These pumps have high flow rates for irrigation and landscaping. The open dripproof (ODP) motor is for use in clean, dry, and well-ventilated environments. Pumps are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created which allows the pump to draw liquid upward. They can be mounted up to 25 ft. above your liquid source.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry. If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

For technical drawings and 3-D models, click on a part number.

	Flow Rate, gpm														Intake (NPT)		Discharge (NPT)		Overall
Max. Flow Rate, gpm	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	@ 70 ft. of Head	@ 80 ft. of Head	@ 90 ft. of Head	@ 100 ft. of Head	@ 110 ft. of Head	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each
120/240V AC, Single Phase
Hardwire
56	53	50	46	43	37	33	25	__	__	108	60	1	1	14.8/7.4	2	Female	1 1/2	Female	18 5/8"	10 3/16"	11 7/8"	0000000	0000000
69	__	64	60	55	50	45	36	30	18	117	60	1	1 1/2	19.2/9.6	2	Female	1 1/2	Female	19 3/4"	10 3/16"	11 7/8"	0000000	000000
77	__	65	62	57	54	47	42	35	26	132	60	1	2	24/12	2	Female	2	Female	21"	11 1/4"	12 3/8"	0000000	00000000

Circulation Pumps for Water and Oil

These pumps can be used to move water and lubricating oil in boiler feed systems, cooling towers, and heat exchangers. The housing rotates for vertical or horizontal discharge. They have totally enclosed fan-cooled (TEFC) motors for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

For technical drawings and 3-D models, click on a part number.

	Flow Rate, gpm												Intake (NPT)		Discharge (NPT)		Overall
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	Motor Enclosure Type	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each
120/230V AC, Single Phase—With Thermal Overload Protection
Hardwire
47	42	34	25	10	__	__	45	75	20	Totally Enclosed Fan Cooled	1/2	9/5	1	Female	3/4	Female	13"	8 3/4"	8 5/8"	0000000	0000000
79	72	63	51	35	5	__	52	75	20	Totally Enclosed Fan Cooled	1 1/2	18/9	1 1/4	Female	1	Female	14 1/4"	8 3/4"	8 5/8"	0000000	000000
120/208-240V AC, Single Phase—With Thermal Overload Protection
Hardwire
90	85	78	69	56	40	15	65	75	20	Totally Enclosed Fan Cooled	2	16/9- 8	1 1/4	Female	1	Female	15 1/8"	8 7/8"	8 1/2"	0000000	000000
208-240/460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
48	42	35	25	10	__	__	45	75	20	Totally Enclosed Fan Cooled	1/2	2.8- 2.7/1.4	1	Female	3/4	Female	12 3/8"	8 7/8"	7 1/4"	00000000	000000
90	85	78	69	56	40	15	65	75	20	Totally Enclosed Fan Cooled	2	5.8- 5.5/2.9	1 1/4	Female	1	Female	14 5/8"	8 7/8"	8 1/2"	0000000	000000

Replacement Seal Assembly

00000000

Each

000000

Harsh-Environment Circulation Pumps for Water and Oil

The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Use these pumps to move water and lubricating oil in boiler feed systems, cooling towers, and heat exchangers. The housing rotates for vertical or horizontal discharge. Pumps are self-priming after you fill the pump chamber with liquid. As liquid in the chamber is expelled, a suction force is created, which allows the pump to draw liquid upward.

	Flow Rate, gpm											Intake (NPT)		Discharge (NPT)		Overall
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	hp	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each
120/208-240V AC, Single Phase—With Thermal Overload Protection
Hardwire
69	61	52	42	24	4	__	52	75	20	3/4	10/5.2- 5	1 1/2	Female	1 1/2	Female	15 7/8"	8 7/8"	9 1/2"	0000000	000000000
100	91	79	66	48	7	__	52	75	20	1 1/2	16.6/9- 8.3	1 1/2	Female	1 1/2	Female	16 1/2"	8 7/8"	9 1/2"	0000000	00000000
208-240/460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
69	61	52	42	24	4	__	52	75	20	3/4	2.8- 2.7/1.35	1 1/2	Female	1 1/2	Female	15 3/8"	8 7/8"	9 1/2"	0000000	00000000
100	91	79	66	48	7	__	52	75	20	1 1/2	4.3- 4.2/2.2	1 1/2	Female	1 1/2	Female	16 3/8"	8 7/8"	9 1/2"	0000000	00000000
130	123	113	99	82	61	16	63	75	20	2	5.8- 5.5/2.9	1 1/2	Female	1 1/2	Female	17 3/8"	8 7/8"	9 1/2"	0000000	00000000

Replacement Seal Assembly

00000000

Each

000000

Circulation Pumps for Water and Coolants

Move water and coolants, such as ethylene glycol, in boiler feed systems, cooling towers, and heat exchangers. They have an open dripproof (ODP) motor for use in clean, dry, and well-ventilated environments. The housing rotates for vertical or horizontal discharge. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm									Intake (NPT)		Discharge (NPT)		Overall					Impellers		Maintenance Kits
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	Current, A	Pipe Size	Gender	Pipe Size	Gender	Lg.	Wd.	Ht.		Each		Each		Each
120/240V AC, 1/3 hp (Single Phase)—With Thermal Overload Protection
Hardwire
23	21	17	14	11	5	56	75	1	6.8/3.4	3/8	Female	3/8	Female	11 7/8"	5 3/8"	7 3/4"	0000000	0000000	0000000	0000000	0000000	000000
38	35	30	25	18	9	57	75	1	6.8/3.4	3/4	Female	1/2	Female	11 7/8"	5 3/8"	7 3/4"	0000000	000000	0000000	000000	0000000	00000
66	55	37	16	__	__	35	75	1	6.8/3.4	1 1/4	Female	1	Female	11 7/8"	6 3/8"	7 3/4"	0000000	000000	00000000	000000	0000000	00000

Replacement Seal Assembly

0000000

Each

000000

Maintenance Kits for Circulation Pumps

Keep your circulation pump in working order by replacing broken or worn parts. Match the pump’s manufacturer and model number to choose the right kit.

AMT Pump Company
For Pump Model Number	For Pump Part Number	Kit Number		Each
__	3680-975-97, 5160-975-97	3680-015-09	0000000	000000
__	3696-975-97	3696-013-98	0000000	00000
2821-95, 2825-95, 2827-95	2821-95, 2825-95, 2827-95	2820-304-95	00000000	00000
Anderson Process
AM Series	TM2FE-ER-VT-076-AA	TM-RG241V	00000000	00000
AM Series	TM2GE-ER-VT-090-AA	TM-RG244V	00000000	00000
AMX Series	TM4HC-EC-VT-090-BA	TM-RG356V	00000000	00000
AMX Series	TM4KC-EC-VT-108-BA	TM-RG362V	00000000	00000
AMX Series	TM6LC-EC-VT-123-BA, TM6MC-EC-VT-135-BA	TM-RG368V	00000000	00000
Finish Thompson
AC	AC4STS1V300B015C05, AC4STS1V320B015C08, AC4STS1V350B015C15	A102174	0000000	000000
AC	AC5RTS1V300B015C13, AC5RTS1V350B015C22, AC5RTS2V370B015C24, AC5RTS2V450B015C25, AC5STS1V400B015C12, AC5STS1V420B015C22, AC5STS2V400B015C06, AC5STS3V458B015C24, AC5STS3V478B015C25	A102147	0000000	000000
Graymills
IMS	IMS08-E, IMS08-F, IMS25-E, IMS25-F	02-9551-51	00000000	00000
IMS	IMS100-F, IMS50-E, IMS50-F, IMS75-F	785-92480	00000000	000000
MTH Pumps
T41	T41B-AB, T41C-AB, T41G-AB, T41J-AB	SK4100	000000000	000000
March
Series 5.5, Series 6	0151-0027-0300, 0151-0027-0900, 0153-0002-0400, 0153-0002-0500	0153-0015-1000	00000000	0000
Series 7	0155-0173-0200, 0155-0174-0200	0155-0010-1000	00000000	00000
Series 7.5	0156-0001-0100	0156-0010-1000	00000000	00000
Series 8	0157-0008-0200	0157-0011-1000	00000000	00000
RS Corcoran
2000D	2DAA05.33-3.25, 2DAA05.5-3.75, 2DAA05.52-3.75, 2DAA1-4, 2DAA1.5-4.44, 2DAA13-4, 2DAB2-4.25, 2DAB3-4.44	M0830-1007V	00000000	000000

Impellers for Circulation Pumps

Match your pump’s manufacturer and model number to choose the right replacement impeller.

AMT Pump Company
For Pump Model Number	For Pump Part Number	Kit Number		Each
__	3680-975-97, 5160-975-97	3680-015-09	0000000	0000000
__	3696-975-97	3696-013-98	00000000	000000
2761-95	2761-95	2820-011-0B	000000000	00000
2762-95, 276B-95	2762-95, 276B-95	2820-011-09	000000000	00000
2764-95, 276D-95	2764-95, 276D-95	2820-011-0A	000000000	00000
276C-95	276C-95	2820-011-0C	000000000	00000
282A-95	282A-95	2820-011-05	000000000	00000
282B-95	282B-95	2820-011-06	000000000	00000
282C-95	282C-95	2820-011-03	000000000	00000
282D-95	282D-95	2820-011-01	000000000	00000
282E-95	282E-95	2820-011-07	000000000	00000
282F-95	282F-95	2820-011-02	000000000	00000
282K-95	282K-95	2820-011-04	000000000	00000
282M-95	282M-95	2820-011-08	000000000	00000
2851-95, 285E-95	2851-95, 285E-95	2850-010-01	000000000	00000
2852-95, 285F-95	2852-95, 285F-95	2850-010-03	000000000	00000
2853-95, 285G-95	2853-95, 285G-95	2850-010-05	000000000	00000
2855-95, 285H-95	2855-95, 285H-95	2850-010-07	000000000	00000
285J-95	285J-95	2850-010-06	000000000	00000
285K-95	285K-95	2850-010-08	000000000	00000
285P-95	285P-95	2850-010-04	000000000	00000
2874-95	2874-95	2874-013-90	00000000	000000
2875-95	2875-95	2875-013-90	00000000	000000
2876-95	2876-95	2876-013-90	000000000	000000
Anderson Process
AM Series	TM2FE-ER-VT-076-AA	TM-M3L23E-Z	00000000	000000
AM Series	TM2GE-ER-VT-090-AA	TM-M5L02E-Z	00000000	000000
AMX Series	TM4HC-EC-VT-090-BA	TM-X0L05EC	00000000	000000
AMX Series	TM4KC-EC-VT-108-BA	TM-X1L05EC	00000000	000000
AMX Series	TM6LC-EC-VT-123-BA	TM-X2L05EC	00000000	000000
AMX Series	TM6MC-EC-VT-135-BA	TM-X3L05EC	00000000	000000
Finish Thompson
AC	AC4STS1V300B015C05, AC5RTS1V300B015C13	A102105-1	0000000	000000
AC	AC4STS1V320B015C08	A102105-2	0000000	000000
AC	AC4STS1V350B015C15, AC5RTS1V350B015C22	A102105-3	0000000	000000
AC	AC5RTS2V370B015C24	A102105-4	0000000	000000
AC	AC5RTS2V450B015C25	A102105-5	0000000	000000
AC	AC5STS1V400B015C12, AC5STS2V400B015C06	A102114-1	0000000	000000
AC	AC5STS1V420B015C22	A102114-2	0000000	000000
AC	AC5STS3V458B015C24	A102114-11	0000000	000000
AC	AC5STS3V478B015C25	A102114-12	0000000	000000
Goulds Pumps
1GD, 3888D3, 3888D4, 3SD, 3SDX, 4SD, 4SDX	__	4K11	0000000	00000
GT	__	2K713	0000000	00000
Graymills
IMS, IMV	IMS08-E, IMS08-F, IMV08-E, IMV08-F	785-91346	0000000	00000
IMS, IMV	IMS100-F, IMS75-F, IMV100-F, IMV75-F	785-91356	0000000	000000
IMS, IMV	IMS25-E, IMS25-F, IMV25-E, IMV25-F	785-91351	0000000	00000
IMS, IMV	IMS50-E, IMS50-F, IMV50-E, IMV50-F	785-91354	0000000	00000
VPJ	VPJ310-A, VPJ310-B, VPJ35-A, VPJ35-B, VPJ38-A, VPJ38-B	401-37405	0000000	000000
MP Pumps
S110C	25173	25021	0000000	000000
S130C	22730	22628	0000000	000000
S130C	27756	25020	0000000	000000
S200C	22729	22689	0000000	000000
S200C	22737	22686	0000000	000000
S30C	22731	22573	0000000	000000
S30C	22746	22143	0000000	000000
S30C	24189	22138	0000000	000000
S60C	27669	27662	0000000	000000
S60C	27672	27663	0000000	00000000
S60C	27675	27664	0000000	000000
S80C	26539	25668	0000000	000000
S80C	26622	26585	0000000	000000
MTH Pumps
T41	T41B-AB	BK4100	000000000	000000
T41	T41C-AB	BK4101	000000000	000000
T41	T41D-AB	BK4102	000000000	000000
T41	T41G-AB	BK4104	000000000	000000
T41	T41J-AB	BK4105	000000000	000000
March
Series 4 & 5	TE-5C-MD	0150-0148-0200	0000000	000000
Series 5.5	0151-0027-0300, 0151-0027-0900	0151-0046-0300	00000000	000000
Series 6	0153-0002-0400, 0153-0002-0500	0153-0043-0500	00000000	000000
Series 7	0155-0173-0200, 0155-0174-0200	0155-0160-0200	00000000	000000
Series 7 & 7.5	TE-7R-MD	0155-0165-0100	0000000	000000
Series 7.5	0156-0001-0100	0156-0004-0200	00000000	00000000
Series 8	0157-0008-0200	0157-0050-0500	00000000	00000000
RS Corcoran
2000D	2DAA05.33-3.25	2003D-0325	00000000	000000
2000D	2DAA05.5-3.75, 2DAA05.52-3.75	2003D-0375	00000000	000000
2000D	2DAA1-4, 2DAA13-4	2003D-0400	00000000	000000
2000D	2DAA1.5-4.44, 2DAB3-4.44	2003D-0444	00000000	000000
2000D	2DAB2-4.25	2003D-0425	00000000	000000
Thomsen
No. 4	41021-DA, 41521-DA	9400-67	0000000	000000
No. 4	42021-EA	9397-67	0000000	000000
No. 4	42521-GA	9395-67	0000000	000000
No. 5	50321-KA, 50421-KA	9405-67	0000000	000000

Extended-Life Plastic Circulation Pumps for Chemicals

These pumps have the best chemical resistance of all our circulation pumps. Instead of a shaft seal, they use magnets to turn the impeller, reducing wear and leakage. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm										Pipe Size		Overall					Maintenance Kits		Replacement Impellers
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Intake (Gender)	Discharge (Gender)	Lg.	Wd.	Ht.		Each		Each		Each
120V AC, 240V AC, Single Phase—Without Thermal Overload Protection
Hardwire
23	__	20	10	__	__	__	35	__	1/4	2.07/4.14	1 (Female)	1 (Female)	14 3/8"	5 1/8"	7 7/8"	0000000	000000000	00000000	000000	00000000	0000000
26	__	26	12	__	__	__	35	__	1/3	3.24/6.84	1 (Female)	1 (Female)	16 5/16"	6 1/8"	8 3/16"	0000000	00000000	00000000	00000	00000000	000000
240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
57	57	53	30	25	__	__	45	__	1/2	1.1/2.2	1 1/2 (Female)	1 1/2 (Female)	18 3/8"	8 7/8"	11 5/16"	0000000	00000000	00000000	00000	00000000	000000
90	90	84	74	61	49	__	70	__	1	1.5/3	1 1/2 (Female)	1 1/2 (Female)	18 7/8"	6 5/16"	10 1/8"	0000000	00000000	00000000	00000	00000000	000000
120V AC, 208–240V AC, Single Phase—With Thermal Overload Protection
Hardwire
38	36	32	27	21	__	__	49	5	1/2	7.5/3.7-3.7	1 (Female)	3/4 (Male)	15 1/2"	9"	8 1/4"	0000000	00000000	00000000	0000	00000000	000000
53	53	46	40	33	23	2	60	5	1	9.2/6.3-4.6	1 1/2 (Female)	1 (Male)	17 13/16"	9 1/8"	8 3/16"	0000000	00000000	00000000	00000	00000000	000000
208–240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
30	31	26	20	7	__	__	41	5	1/3	0.6/1.3-1.2	1 (Female)	3/4 (Male)	15 1/16"	9 1/4"	7 3/8"	0000000	00000000	00000000	0000	00000000	000000
38	36	32	27	21	__	__	49	5	1/2	1.7/1.7-0.8	1 (Female)	3/4 (Male)	15 1/16"	9 1/8"	7 3/16"	0000000	00000000	00000000	0000	00000000	000000
53	53	46	40	33	23	2	60	5	1	1.1/3.3-2.2	1 1/2 (Female)	1 (Male)	16 9/16"	9 1/8"	7 3/8"	0000000	00000000	00000000	00000	00000000	000000
82	82	82	81	80	71	61	85	5	2	2.4/4.9-4.8	2 (Male)	1 1/2 (Male)	20 11/16"	10 3/8"	10"	0000000	00000000	00000000	00000	00000000	00000000
120	120	120	120	112	105	92	95	5	3	3.9/8-7.8	2 (Male)	1 1/2 (Male)	24 3/8"	11 1/2"	10 1/2"	0000000	00000000	00000000	00000	00000000	00000000

Baseplates for Circulation Pumps

Extend the service life of your pump by mounting it to a baseplate. These heavy duty plates minimize vibration and raise the pump off the floor, preventing damage to the motor from flooding or spills.

For technical drawings and 3-D models, click on a part number.

	Overall
Material	Lg.	Wd.	Ht.		Each
For 56C NEMA Frame
316 Stainless Steel	24"	10"	2 1/2"	000000	0000000
Fiberglass	13"	9 1/2"	2 1/2"	000000	000000
Fiberglass	24"	8 1/2"	2 3/4"	000000	000000
Fiberglass	24"	10"	2 3/4"	000000	000000
For 143TC, 145TC NEMA Frame
316 Stainless Steel	30 1/2"	12"	2 1/2"	000000	000000
Fiberglass	30 1/2"	12"	2 3/4"	000000	000000
For 182TC, 184TC NEMA Frame
316 Stainless Steel	39"	12"	2 1/2"	000000	000000
Fiberglass	39"	12"	2 3/4"	000000	000000

Email Us

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

Circulation Pumps for Water Sprinklers

Circulation Pumps for Water and Oil

Harsh-Environment Circulation Pumps for Water and Oil

Circulation Pumps for Water and Coolants

Maintenance Kits for Circulation Pumps

Impellers for Circulation Pumps

Extended-Life Plastic Circulation Pumps for Chemicals

Baseplates for Circulation Pumps