Filter by
System of Measurement
Shaft Diameter
ID
OD
Bore Type
Strand Type
Chain Type
REACH
RoHS
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Chain Standard
Sprocket Type
Sprockets
 |
Finished Bore |
Sprocket teeth mesh with your roller chain to smoothly transmit power. These U.S.-made sprockets have machined teeth for a more precise fit than flame-cut or punched teeth, allowing them to glide in and out of the chain to reduce wear and extend chain life.
Steel—Steel is strong, but best for dry environments since moisture will cause it to rust.
Wear-Resistant Steel with Hardened Teeth—These sprockets have teeth that are hardened from the tip to the base so they withstand chain contact and wear evenly. That means fewer broken teeth and a longer lifespan than sprockets with unhardened or tip-hardened teeth. Steel is best for dry environments since moisture will cause it to rust.
Finished Bore—Mount these sprockets onto your shaft and secure with a set screw—no machining required.
For Roller Chain | Keyway | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | Std. | Pitch | No. of Teeth | OD | Bore Type | For Shaft Dia. | Wd. | Dp. | Each | |||
For Single Strand | ||||||||||||
Steel | ||||||||||||
| 50 | ANSI | 5/8" | 32 | 6 3/4" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K296 | 0000000 | ||
| 50 | ANSI | 5/8" | 34 | 7 1/8" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K308 | 000000 | ||
| 50 | ANSI | 5/8" | 35 | 7 5/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K739 | 000000 | ||
| 50 | ANSI | 5/8" | 36 | 7 1/2" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K353 | 000000 | ||
| 50 | ANSI | 5/8" | 38 | 7 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2741T112 | 000000 | ||
| 50 | ANSI | 5/8" | 40 | 8 5/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K745 | 000000 | ||
| 50 | ANSI | 5/8" | 42 | 8 3/4" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K388 | 000000 | ||
| 50 | ANSI | 5/8" | 45 | 9 5/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K751 | 000000 | ||
| 50 | ANSI | 5/8" | 48 | 9 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K398 | 000000 | ||
| 50 | ANSI | 5/8" | 54 | 11 1/8" | Finished | 1 15/16" | 1/2" | 1/4" | 2741T209 | 000000 | ||
| 50 | ANSI | 5/8" | 60 | 12 5/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K853 | 000000 | ||
| 50 | ANSI | 5/8" | 70 | 14 5/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2741T309 | 000000 | ||
| 50 | ANSI | 5/8" | 72 | 14 11/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2741T409 | 000000 | ||
| 60 | ANSI | 3/4" | 16 | 4 1/4" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K479 | 00000 | ||
| 60 | ANSI | 3/4" | 17 | 4 7/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K639 | 00000 | ||
| 60 | ANSI | 3/4" | 18 | 4 11/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K709 | 00000 | ||
| 60 | ANSI | 3/4" | 19 | 4 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K719 | 00000 | ||
| 60 | ANSI | 3/4" | 20 | 5 3/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K59 | 00000 | ||
| 60 | ANSI | 3/4" | 21 | 5 7/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K31 | 00000 | ||
| 60 | ANSI | 3/4" | 22 | 5 11/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K33 | 000000 | ||
| 60 | ANSI | 3/4" | 23 | 5 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K41 | 000000 | ||
| 60 | ANSI | 3/4" | 24 | 6 1/8" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K42 | 000000 | ||
| 60 | ANSI | 3/4" | 25 | 6 3/8" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K483 | 000000 | ||
| 60 | ANSI | 3/4" | 26 | 6 5/8" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K409 | 000000 | ||
| 60 | ANSI | 3/4" | 28 | 7 1/8" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K421 | 000000 | ||
| 60 | ANSI | 3/4" | 30 | 7 9/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K484 | 000000 | ||
| 60 | ANSI | 3/4" | 32 | 8 1/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K472 | 000000 | ||
| 60 | ANSI | 3/4" | 34 | 8 9/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K511 | 000000 | ||
| 60 | ANSI | 3/4" | 35 | 8 3/4" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K488 | 000000 | ||
| 60 | ANSI | 3/4" | 36 | 9" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K522 | 000000 | ||
| 60 | ANSI | 3/4" | 38 | 9 1/2" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K574 | 000000 | ||
| 60 | ANSI | 3/4" | 40 | 10" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K555 | 000000 | ||
| 60 | ANSI | 3/4" | 42 | 10 7/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K603 | 000000 | ||
| 60 | ANSI | 3/4" | 45 | 11 3/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K707 | 000000 | ||
| 60 | ANSI | 3/4" | 48 | 11 7/8" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K617 | 000000 | ||
| 60 | ANSI | 3/4" | 54 | 13 5/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2741T123 | 000000 | ||
| 60 | ANSI | 3/4" | 60 | 14 3/4" | Finished | 1 15/16" | 1/2" | 1/4" | 6236K856 | 000000 | ||
| 60 | ANSI | 3/4" | 70 | 17 1/8" | Finished | 1 15/16" | 1/2" | 1/4" | 2741T133 | 000000 | ||
| 60 | ANSI | 3/4" | 72 | 17 5/8" | Finished | 1 15/16" | 1/2" | 1/4" | 2741T143 | 000000 | ||
| 80 | ANSI | 1" | 13 | 4 11/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K549 | 00000 | ||
| 80 | ANSI | 1" | 14 | 5" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K559 | 00000 | ||
| 80 | ANSI | 1" | 15 | 5 5/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K569 | 00000 | ||
| 80 | ANSI | 1" | 16 | 5 5/8" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K578 | 000000 | ||
| 80 | ANSI | 1" | 17 | 5 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K739 | 000000 | ||
| 80 | ANSI | 1" | 18 | 6 1/4" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K749 | 000000 | ||
| 80 | ANSI | 1" | 19 | 6 9/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K759 | 000000 | ||
| 80 | ANSI | 1" | 20 | 6 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 6280K769 | 000000 | ||
Wear-Resistant Steel with Hardened Teeth | ||||||||||||
| 60 | ANSI | 3/4" | 16 | 4 1/4" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T635 | 00000 | ||
| 60 | ANSI | 3/4" | 17 | 4 7/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T638 | 00000 | ||
| 60 | ANSI | 3/4" | 18 | 4 11/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T646 | 00000 | ||
| 60 | ANSI | 3/4" | 19 | 4 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T649 | 00000 | ||
| 60 | ANSI | 3/4" | 20 | 5 3/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T657 | 00000 | ||
| 80 | ANSI | 1" | 13 | 4 11/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T658 | 00000 | ||
| 80 | ANSI | 1" | 14 | 5" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T668 | 00000 | ||
| 80 | ANSI | 1" | 15 | 5 5/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T678 | 000000 | ||
| 80 | ANSI | 1" | 16 | 5 5/8" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T688 | 000000 | ||
| 80 | ANSI | 1" | 17 | 5 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T814 | 000000 | ||
| 80 | ANSI | 1" | 18 | 6 1/4" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T818 | 000000 | ||
| 80 | ANSI | 1" | 19 | 6 9/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T387 | 000000 | ||
| 80 | ANSI | 1" | 20 | 6 15/16" | Finished | 1 15/16" | 1/2" | 1/4" | 2500T395 | 000000 | ||
Quick-Disconnect (QD) Bushings
 |  |
Clamp-On Shaft Mount |
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing trade number. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
Keyway | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Overall Wd. | Wd. | Dp. | Fastener Tightening Torque, in·lbf | Material | Includes | For Shaft Dia. | Each | |||
Clamp-On Shaft Mount | ||||||||||
Bushing Trade Number SD | ||||||||||
| 1 13/16" | 1/2" | 1/16" | 108 | Sintered Cast Iron | Clamping Screws, Machine Key | 1 15/16" | 6086K429 | 000000 | ||
Bushing Trade Number SDS | ||||||||||
| 1 3/8" | 1/2" | 1/16" | 108 | Sintered Cast Iron | Clamping Screws, Machine Key | 1 15/16" | 6086K854 | 00000 | ||
Bushing Trade Number SF | ||||||||||
| 2 1/16" | 1/2" | 1/4" | 360 | Sintered Steel | Clamping Screws | 1 15/16" | 6086K633 | 00000 | ||
Bushing Trade Number SK | ||||||||||
| 1 15/16" | 1/2" | 1/4" | 180 | Sintered Steel | Clamping Screws | 1 15/16" | 6086K529 | 00000 | ||
Taper-Lock Bushings
 |
Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing trade number. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.
Keyway | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Taper | Fastener Tightening Torque, in·lbf | Includes | Each | |||
Steel | ||||||||||
Bushing Trade Number 2012 | ||||||||||
| 1 15/16" | 1 1/4" | 1/2" | 3/16" | 8° | 280 | Machine Key, Set Screws | 57095K313 | 000000 | ||
Bushing Trade Number 2517 | ||||||||||
| 1 15/16" | 1 3/4" | 1/2" | 1/4" | 8° | 430 | Set Screws | 57095K236 | 00000 | ||
Bushing Trade Number 3020 | ||||||||||
| 1 15/16" | 2" | 1/2" | 1/4" | 8° | 800 | Set Screws | 57095K322 | 000000 | ||
Cast Iron | ||||||||||
Bushing Trade Number 3030 | ||||||||||
| 1 15/16" | 3" | 1/2" | 1/4" | 8° | 800 | Set Screws | 57095K642 | 000000 | ||
Bushing Trade Number 3535 | ||||||||||
| 1 15/16" | 3 1/2" | 1/2" | 1/4" | 8° | 1,000 | Set Screws | 57095K372 | 000000 | ||
Bushing Trade Number 4040 | ||||||||||
| 1 15/16" | 4" | 1/2" | 1/4" | 8° | 1,700 | Set Screws | 57095K713 | 000000 | ||
Hub-Mount Screw-Clamp Bushings
 |
 |
For Shaft Dia. | OD | Overall Wd. | Max. Torque, in·lbf | Fastener Tightening Torque, in·lbf | Each | |||
|---|---|---|---|---|---|---|---|---|
Zinc-Plated Steel | ||||||||
| 1 15/16" | 3 9/16" | 1 3/16" | 11,550 | 100 | 7654N15 | 0000000 | ||
Flush-Mount Screw-Clamp Bushings
 |  |
Insert these bushings into the bore of your sprocket for flush or recessed mounting. They handle shock loads. When you tighten the included clamping screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.
For Shaft Dia. | OD | Overall Wd. | Max. Torque, in·lbf | Fastener Tightening Torque, in·lbf | Includes | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Steel | |||||||||
| 1 15/16" | 3 3/16" | 1 17/64" | 15,400 | 360 | Clamping Screws | 2328K19 | 0000000 | ||
