Filter by
Shaft Diameter
ID
Shaft Type
OD
Overall Width
Material
Width
Strand Type
Hub Diameter
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Chain Standard
Chain Type
Sprockets
 |
Finished Bore |
Sprocket teeth mesh with your roller chain to smoothly transmit power. These U.S.-made sprockets have machined teeth for a more precise fit than flame-cut or punched teeth, allowing them to glide in and out of the chain to reduce wear and extend chain life.
Steel—Steel is strong, but best for dry environments since moisture will cause it to rust.
Wear-Resistant Steel with Hardened Teeth—These sprockets have teeth that are hardened from the tip to the base so they withstand chain contact and wear evenly. That means fewer broken teeth and a longer lifespan than sprockets with unhardened or tip-hardened teeth. Steel is best for dry environments since moisture will cause it to rust.
Finished Bore—Mount these sprockets onto your shaft and secure with a set screw—no machining required.
For Roller Chain | Keyway | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | Std. | Pitch | No. of Teeth | OD | Bore Type | For Shaft Dia. | Wd. | Dp. | Each | |||
For Single Strand | ||||||||||||
Steel | ||||||||||||
| 50 | ANSI | 5/8" | 16 | 3 1/2" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K357 | 000000 | ||
| 50 | ANSI | 5/8" | 17 | 3 3/4" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K358 | 00000 | ||
| 50 | ANSI | 5/8" | 18 | 3 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K359 | 00000 | ||
| 50 | ANSI | 5/8" | 19 | 4 1/8" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K364 | 00000 | ||
| 50 | ANSI | 5/8" | 20 | 4 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K365 | 00000 | ||
| 50 | ANSI | 5/8" | 32 | 6 3/4" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K843 | 000000 | ||
| 50 | ANSI | 5/8" | 34 | 7 1/8" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K844 | 000000 | ||
| 50 | ANSI | 5/8" | 35 | 7 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K845 | 000000 | ||
| 50 | ANSI | 5/8" | 36 | 7 1/2" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K846 | 000000 | ||
| 50 | ANSI | 5/8" | 38 | 7 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2741T151 | 000000 | ||
| 50 | ANSI | 5/8" | 40 | 8 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K847 | 000000 | ||
| 50 | ANSI | 5/8" | 42 | 8 3/4" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K848 | 000000 | ||
| 50 | ANSI | 5/8" | 45 | 9 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K849 | 000000 | ||
| 50 | ANSI | 5/8" | 48 | 9 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K851 | 000000 | ||
| 50 | ANSI | 5/8" | 54 | 11 1/8" | Finished | 1 5/8" | 3/8" | 3/16" | 2741T152 | 000000 | ||
| 50 | ANSI | 5/8" | 60 | 12 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K852 | 000000 | ||
| 50 | ANSI | 5/8" | 70 | 14 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2741T153 | 000000 | ||
| 50 | ANSI | 5/8" | 72 | 14 11/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2741T154 | 000000 | ||
| 60 | ANSI | 3/4" | 14 | 3 3/4" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K394 | 00000 | ||
| 60 | ANSI | 3/4" | 15 | 4" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K328 | 00000 | ||
| 60 | ANSI | 3/4" | 16 | 4 1/4" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K478 | 00000 | ||
| 60 | ANSI | 3/4" | 17 | 4 7/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K638 | 00000 | ||
| 60 | ANSI | 3/4" | 18 | 4 11/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K708 | 00000 | ||
| 60 | ANSI | 3/4" | 19 | 4 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K718 | 00000 | ||
| 60 | ANSI | 3/4" | 20 | 5 3/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K589 | 00000 | ||
| 60 | ANSI | 3/4" | 21 | 5 7/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K308 | 00000 | ||
| 60 | ANSI | 3/4" | 22 | 5 11/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K319 | 000000 | ||
| 60 | ANSI | 3/4" | 23 | 5 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K408 | 000000 | ||
| 60 | ANSI | 3/4" | 24 | 6 1/8" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K419 | 000000 | ||
| 60 | ANSI | 3/4" | 25 | 6 3/8" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K482 | 000000 | ||
| 60 | ANSI | 3/4" | 26 | 6 5/8" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K407 | 000000 | ||
| 60 | ANSI | 3/4" | 28 | 7 1/8" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K418 | 000000 | ||
| 60 | ANSI | 3/4" | 30 | 7 9/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K538 | 000000 | ||
| 60 | ANSI | 3/4" | 32 | 8 1/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K464 | 000000 | ||
| 60 | ANSI | 3/4" | 34 | 8 9/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K508 | 000000 | ||
| 60 | ANSI | 3/4" | 35 | 8 3/4" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K546 | 000000 | ||
| 60 | ANSI | 3/4" | 36 | 9" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K519 | 000000 | ||
| 60 | ANSI | 3/4" | 38 | 9 1/2" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K572 | 000000 | ||
| 60 | ANSI | 3/4" | 40 | 10" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K489 | 000000 | ||
| 60 | ANSI | 3/4" | 42 | 10 7/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K601 | 000000 | ||
| 60 | ANSI | 3/4" | 45 | 11 3/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K705 | 000000 | ||
| 60 | ANSI | 3/4" | 48 | 11 7/8" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K615 | 000000 | ||
| 60 | ANSI | 3/4" | 54 | 13 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2741T121 | 000000 | ||
| 60 | ANSI | 3/4" | 60 | 14 3/4" | Finished | 1 5/8" | 3/8" | 3/16" | 6236K586 | 000000 | ||
| 60 | ANSI | 3/4" | 70 | 17 1/8" | Finished | 1 5/8" | 3/8" | 3/16" | 2741T131 | 000000 | ||
| 60 | ANSI | 3/4" | 72 | 17 5/8" | Finished | 1 5/8" | 3/8" | 3/16" | 2741T141 | 000000 | ||
| 80 | ANSI | 1" | 11 | 4" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K529 | 00000 | ||
| 80 | ANSI | 1" | 12 | 4 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K537 | 00000 | ||
| 80 | ANSI | 1" | 13 | 4 11/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K283 | 00000 | ||
| 80 | ANSI | 1" | 14 | 5" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K558 | 00000 | ||
| 80 | ANSI | 1" | 15 | 5 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K568 | 00000 | ||
| 80 | ANSI | 1" | 16 | 5 5/8" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K577 | 000000 | ||
| 80 | ANSI | 1" | 17 | 5 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K737 | 000000 | ||
| 80 | ANSI | 1" | 18 | 6 1/4" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K747 | 000000 | ||
| 80 | ANSI | 1" | 19 | 6 9/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K757 | 000000 | ||
| 80 | ANSI | 1" | 20 | 6 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 6280K767 | 000000 | ||
Wear-Resistant Steel with Hardened Teeth | ||||||||||||
| 50 | ANSI | 5/8" | 16 | 3 1/2" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T837 | 00000 | ||
| 50 | ANSI | 5/8" | 17 | 3 3/4" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T104 | 00000 | ||
| 50 | ANSI | 5/8" | 18 | 3 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T106 | 00000 | ||
| 50 | ANSI | 5/8" | 19 | 4 1/8" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T108 | 00000 | ||
| 50 | ANSI | 5/8" | 20 | 4 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T111 | 00000 | ||
| 60 | ANSI | 3/4" | 14 | 3 3/4" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T112 | 00000 | ||
| 60 | ANSI | 3/4" | 15 | 4" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T113 | 00000 | ||
| 60 | ANSI | 3/4" | 16 | 4 1/4" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T633 | 00000 | ||
| 60 | ANSI | 3/4" | 17 | 4 7/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T636 | 00000 | ||
| 60 | ANSI | 3/4" | 18 | 4 11/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T639 | 00000 | ||
| 60 | ANSI | 3/4" | 19 | 4 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T647 | 00000 | ||
| 60 | ANSI | 3/4" | 20 | 5 3/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T655 | 00000 | ||
| 80 | ANSI | 1" | 11 | 4" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T968 | 00000 | ||
| 80 | ANSI | 1" | 12 | 4 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T978 | 00000 | ||
| 80 | ANSI | 1" | 13 | 4 11/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T988 | 00000 | ||
| 80 | ANSI | 1" | 14 | 5" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T338 | 00000 | ||
| 80 | ANSI | 1" | 15 | 5 5/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T348 | 000000 | ||
| 80 | ANSI | 1" | 16 | 5 5/8" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T358 | 000000 | ||
| 80 | ANSI | 1" | 17 | 5 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T368 | 000000 | ||
| 80 | ANSI | 1" | 18 | 6 1/4" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T378 | 000000 | ||
| 80 | ANSI | 1" | 19 | 6 9/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T385 | 000000 | ||
| 80 | ANSI | 1" | 20 | 6 15/16" | Finished | 1 5/8" | 3/8" | 3/16" | 2500T393 | 000000 | ||
Quick-Disconnect (QD) Bushings
 |  |
Clamp-On Shaft Mount |
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing trade number. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
Keyway | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Overall Wd. | Wd. | Dp. | Fastener Tightening Torque, in·lbf | Material | Includes | For Shaft Dia. | Each | |||
Clamp-On Shaft Mount | ||||||||||
Bushing Trade Number SD | ||||||||||
| 1 13/16" | 3/8" | 3/16" | 108 | Sintered Steel | Clamping Screws | 1 5/8" | 6086K425 | 000000 | ||
Bushing Trade Number SDS | ||||||||||
| 1 3/8" | 3/8" | 3/16" | 108 | Sintered Steel | Clamping Screws | 1 5/8" | 6086K325 | 00000 | ||
Bushing Trade Number SF | ||||||||||
| 2 1/16" | 3/8" | 3/16" | 360 | Sintered Steel | Clamping Screws | 1 5/8" | 6086K628 | 00000 | ||
Bushing Trade Number SH | ||||||||||
| 1 5/16" | 3/8" | 1/16" | 108 | Sintered Steel | Clamping Screws, Machine Key | 1 5/8" | 6086K224 | 00000 | ||
Bushing Trade Number SK | ||||||||||
| 1 15/16" | 3/8" | 3/16" | 180 | Sintered Steel | Clamping Screws | 1 5/8" | 6086K525 | 00000 | ||
Taper-Lock Bushings
 |
Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing trade number. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.
Keyway | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Taper | Fastener Tightening Torque, in·lbf | Includes | Each | |||
Steel | ||||||||||
Bushing Trade Number 1610 | ||||||||||
| 1 5/8" | 1" | 3/8" | 1/8" | 8° | 175 | Machine Key, Set Screws | 57095K168 | 000000 | ||
Bushing Trade Number 1615 | ||||||||||
| 1 5/8" | 1 1/2" | 3/8" | 1/8" | 8° | 175 | Machine Key, Set Screws | 57095K194 | 00000 | ||
Bushing Trade Number 2012 | ||||||||||
| 1 5/8" | 1 1/4" | 3/8" | 3/16" | 8° | 280 | Set Screws | 57095K189 | 00000 | ||
Bushing Trade Number 2517 | ||||||||||
| 1 5/8" | 1 3/4" | 3/8" | 3/16" | 8° | 430 | Set Screws | 57095K214 | 00000 | ||
Bushing Trade Number 3020 | ||||||||||
| 1 5/8" | 2" | 3/8" | 3/16" | 8° | 800 | Set Screws | 57095K327 | 000000 | ||
Cast Iron | ||||||||||
Bushing Trade Number 3030 | ||||||||||
| 1 5/8" | 3" | 3/8" | 3/16" | 8° | 800 | Set Screws | 57095K647 | 000000 | ||
Bushing Trade Number 3535 | ||||||||||
| 1 5/8" | 3 1/2" | 3/8" | 3/16" | 8° | 1,000 | Set Screws | 57095K377 | 000000 | ||
Bushing Trade Number 4040 | ||||||||||
| 1 5/8" | 4" | 3/8" | 3/16" | 8° | 1,700 | Set Screws | 57095K715 | 000000 | ||
High-Torque HTD Timing Belt Pulleys
 |
Bushing Bore |
 |
Curved teeth engage with the matching belt better than standard trapezoidal teeth, so these pulleys transmit about twice the torque. All are compatible with Gates PowerGrip HTD, Omega HP, and Carlisle RPP series.
Iron—Strong but best for dry environments since moisture will cause them to rust.
Corrosion-Resistant Stainless Steel—Stands up to wet environments and mild chemicals, such as the ammonia in cleaning solutions.
Bushing Bore—Quickly swap or service parts in tight spaces—no press-fitting or special tools required. Mount a bushing (sold separately) on your shaft and slide the pulley over it. As you tighten the included set screws, the bushing grips the shaft and draws it into the pulley, creating a final hold that is more secure than with set screws alone.
For Bushing | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Belt Wd., mm | Pitch, mm | No. of Teeth | Bore Type | Type | Trade No. | Pitch Dia., mm | No. of Flanges | Each | |||
For H8M Trade Size | |||||||||||
Iron | |||||||||||
| 20 | 8 | 28 | Bushing | Split Tapered | H | 71.3 | 2 | 6497K711 | 000000 | ||
| 20 | 8 | 30 | Bushing | Split Tapered | H | 76.4 | 2 | 6497K712 | 00000 | ||
| 30 | 8 | 28 | Bushing | Split Tapered | H | 71.3 | 2 | 6497K714 | 00000 | ||
| 30 | 8 | 30 | Bushing | Split Tapered | H | 76.4 | 2 | 6497K715 | 00000 | ||
| 30 | 8 | 32 | Bushing | Split Tapered | H | 81.5 | 2 | 6497K716 | 00000 | ||
Corrosion-Resistant Stainless Steel | |||||||||||
| 20 | 8 | 28 | Bushing | Split Tapered | H | 71.3 | 2 | 1230N17 | 000000 | ||
| 20 | 8 | 30 | Bushing | Split Tapered | H | 76.4 | 2 | 1230N18 | 000000 | ||
| 30 | 8 | 28 | Bushing | Split Tapered | H | 71.3 | 2 | 1230N27 | 000000 | ||
| 30 | 8 | 30 | Bushing | Split Tapered | H | 76.4 | 2 | 1230N28 | 000000 | ||
| 30 | 8 | 32 | Bushing | Split Tapered | H | 81.5 | 2 | 1230N29 | 000000 | ||
 |
Split-Tapered Bushing |
Bushing | |||||
|---|---|---|---|---|---|
Type | Trade No. | For Shaft Dia. | Each | ||
| Split Tapered | H | 3/8" | 6086K191 | 000000 | |
| Split Tapered | H | 1/2" | 6086K192 | 00000 | |
| Split Tapered | H | 5/8" | 6086K197 | 00000 | |
| Split Tapered | H | 3/4" | 6086K193 | 00000 | |
| Split Tapered | H | 7/8" | 6086K198 | 00000 | |
| Split Tapered | H | 1" | 6086K194 | 00000 | |
| Split Tapered | H | 1 1/8" | 6086K199 | 00000 | |
| Split Tapered | H | 1 3/16" | 6086K227 | 00000 | |
| Split Tapered | H | 1 1/4" | 6086K195 | 00000 | |
| Split Tapered | H | 1 3/8" | 6086K229 | 00000 | |
| Split Tapered | H | 1 7/16" | 6086K228 | 00000 | |
| Split Tapered | H | 1 1/2" | 6086K196 | 00000 | |
| Split Tapered | H | 10 mm | 9859T711 | 00000 | |
| Split Tapered | H | 12 mm | 9859T713 | 00000 | |
| Split Tapered | H | 14 mm | 9859T714 | 00000 | |
| Split Tapered | H | 16 mm | 9859T715 | 00000 | |
| Split Tapered | H | 18 mm | 9859T716 | 00000 | |
| Split Tapered | H | 19 mm | 9859T717 | 00000 | |
| Split Tapered | H | 20 mm | 9859T718 | 00000 | |
| Split Tapered | H | 22 mm | 9859T719 | 00000 | |
| Split Tapered | H | 24 mm | 9859T721 | 00000 | |
| Split Tapered | H | 25 mm | 9859T722 | 00000 | |
| Split Tapered | H | 28 mm | 9859T723 | 00000 | |
| Split Tapered | H | 30 mm | 9859T724 | 00000 | |
| Split Tapered | H | 32 mm | 9859T725 | 00000 | |
| Split Tapered | H | 35 mm | 9859T726 | 00000 | |
| Split Tapered | H | 38 mm | 9859T728 | 00000 | |
Split-Tapered Bushings
 |
Steel |
Keyway | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Taper | Fastener Tightening Torque, in·lbf | Each | |||
Steel | |||||||||
Bushing Trade Number P1 with Clamping Screws, Machine Key | |||||||||
| 1 5/8" | 1 15/16" | 3/8" | 5/16" | 3° | 192 | 9859T321 | 000000 | ||
Bushing Trade Number P2 with Clamping Screws, Machine Key | |||||||||
| 1 5/8" | 2 15/16" | 3/8" | 5/16" | 3° | 192 | 9859T417 | 00000 | ||
Bushing Trade Number Q1 with Clamping Screws, Machine Key | |||||||||
| 1 5/8" | 2 1/2" | 3/8" | 3/16" | 3° | 348 | 9859T519 | 00000 | ||
Quiet-Drive Tire-Track Timing Belt Pulleys
 |
Bushing Bore |
 |
Crank up the power and turn down the noise. With curved teeth arranged in a tire-track pattern, these pulleys fit snugly into matching belts. The flush fit reduces play (backlash) for more precise movement and up to 25% less operating noise. Compared to pulleys with trapezoidal teeth, they deliver higher torque with less vibration and smoother performance.
Iron—Strong but best for dry environments since moisture will cause them to rust.
Bushing Bore—Quickly swap or service parts in tight spaces—no press-fitting or special tools required. Mount a bushing (sold separately) on your shaft and slide the pulley over it. As you tighten the included set screws, the bushing grips the shaft and draws it into the pulley, creating a final hold that is more secure than with set screws alone.
For Bushing | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Max. Belt Wd., mm | Pitch, mm | No. of Teeth | Bore Type | Type | Trade No. | Pitch Dia., mm | Each | |||
For NRG Trade Size | ||||||||||
Iron | ||||||||||
| 16 | 8 | 28 | Bushing | Split Tapered | H | 71 | 7955K12 | 0000000 | ||
|
Split-Tapered Bushing |
Bushing | |||||
|---|---|---|---|---|---|
Type | Trade No. | For Shaft Dia. | Each | ||
| Split Tapered | H | 3/8" | 6086K191 | 000000 | |
| Split Tapered | H | 1/2" | 6086K192 | 00000 | |
| Split Tapered | H | 5/8" | 6086K197 | 00000 | |
| Split Tapered | H | 3/4" | 6086K193 | 00000 | |
| Split Tapered | H | 7/8" | 6086K198 | 00000 | |
| Split Tapered | H | 1" | 6086K194 | 00000 | |
| Split Tapered | H | 1 1/8" | 6086K199 | 00000 | |
| Split Tapered | H | 1 3/16" | 6086K227 | 00000 | |
| Split Tapered | H | 1 1/4" | 6086K195 | 00000 | |
| Split Tapered | H | 1 3/8" | 6086K229 | 00000 | |
| Split Tapered | H | 1 7/16" | 6086K228 | 00000 | |
| Split Tapered | H | 1 1/2" | 6086K196 | 00000 | |
| Split Tapered | H | 10 mm | 9859T711 | 00000 | |
| Split Tapered | H | 12 mm | 9859T713 | 00000 | |
| Split Tapered | H | 14 mm | 9859T714 | 00000 | |
| Split Tapered | H | 16 mm | 9859T715 | 00000 | |
| Split Tapered | H | 18 mm | 9859T716 | 00000 | |
| Split Tapered | H | 19 mm | 9859T717 | 00000 | |
| Split Tapered | H | 20 mm | 9859T718 | 00000 | |
| Split Tapered | H | 22 mm | 9859T719 | 00000 | |
| Split Tapered | H | 24 mm | 9859T721 | 00000 | |
| Split Tapered | H | 25 mm | 9859T722 | 00000 | |
| Split Tapered | H | 28 mm | 9859T723 | 00000 | |
| Split Tapered | H | 30 mm | 9859T724 | 00000 | |
| Split Tapered | H | 32 mm | 9859T725 | 00000 | |
| Split Tapered | H | 35 mm | 9859T726 | 00000 | |
| Split Tapered | H | 38 mm | 9859T728 | 00000 | |
