Quick-Disconnect (QD) Bushings


The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||
---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
Clamp On | ||||||||
SF Style Bushing | ||||||||
2 3/4" | 2 1/16" | 5/8" | 1/16" | 360 | Cast Iron | Clamping Screws, Machine Key | 00000000 | 000000 |
Taper-Lock Bushings

Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing style. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Taper | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
3020 Style Bushing | |||||||||
2 3/4" | 2" | 5/8" | 5/16" | 8° | 800 | Steel | Set Screws | 000000000 | 000000 |
High-Strength GT Timing Belt Pulleys
For higher speed or higher torque applications, these GT series timing belt pulleys provide a more precise fit than HTD pulleys. Use them where accuracy is critical, such as in storage and retrieval systems or in robotics. Similar to HTD timing belt pulleys, their teeth are curved for high strength. The curved teeth create positive grip engagement with timing belts, so these pulleys do not require re-tensioning—unlike drives using V-belts or sheaves. And unlike chain drives, there’s no metal-on-metal contact, so these pulleys don’t require lubrication.
For technical drawings and 3-D models, click on a part number.



Number of Teeth | Pitch, mm | ID | Bore Type | For Bushing Style | Inside Width, mm | Outside Width, mm | Overall Width, mm | Pitch Diameter, mm | Number of Flanges | Fabrication | Material | Each | |
For 40 mm Maximum Belt Width | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
28 | 14 | 2.75" | Plain | Taper-Lock Style 2012 | 46.23 | 54.1 | 54.1 | 124.765 | 2 | Machined | Black-Oxide Iron | 00000000 | 0000000 |
Ultra-High-Strength Poly Chain Timing Belt Pulleys
Curved teeth with a high pitch provide superior load distribution and reduce wear. They mount with a bushing for a more secure grip on the shaft than set screws. Bushing is not included. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.



OD, mm | Number of Teeth | Pitch, mm | ID | Bore Type | For Bushing Style | Inside Wd., mm | Outside Wd., mm | Overall Wd., mm | Pitch Dia., mm | Number of Flanges | Fabrication | Material | Each | |
For 12 mm Max. Belt Wd. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
124.46 | 45 | 8 | 2.75" | Finished | Taper-Lock Style 2012 | 14.48 | 21.59 | 31.75 | 115 | 2 | Machined | Black-Oxide Steel | 0000000 | 0000000 |
For 20 mm Max. Belt Wd. | ||||||||||||||
141.28 | 28 | 14 | 2.75" | Finished | Taper-Lock Style 2012 | 27.67 | 34.54 | 34.54 | 124.765 | 2 | Cast | Black-Oxide Iron | 00000000 | 000000 |
For 21 mm Max. Belt Wd. | ||||||||||||||
124.46 | 45 | 8 | 2.75" | Finished | Taper-Lock Style 2012 | 24.64 | 31.75 | 31.75 | 115 | 2 | Machined | Black-Oxide Steel | 0000000 | 000000 |
For 36 mm Max. Belt Wd. | ||||||||||||||
127.13 | 45 | 8 | 2.75" | Finished | Taper-Lock Style 2012 | 40.89 | 42.24 | 47.2 | 114.58 | 2 | Cast | Black-Oxide Iron | 00000000 | 000000 |
For 37 mm Max. Belt Wd. | ||||||||||||||
141.28 | 28 | 14 | 2.75" | Finished | Taper-Lock Style 2012 | 42.93 | 50.8 | 50.8 | 124.765 | 2 | Cast | Black-Oxide Iron | 00000000 | 000000 |