Quick-Disconnect (QD) Bushings



The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
304 stainless steel bushings resist corrosion from washdowns and humidity, so they’re common in food-processing plants and other frequently-cleaned areas. You can machine the center of these bushings to fit the exact dimensions of your shaft.
For technical drawings and 3-D models, click on a part number.
Taper-Lock Bushings

Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing style. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Taper | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
1008 Style Bushing | |||||||||
22mm | 22mm | 6mm | 2.8mm | 8° | 55 | Steel | Set Screws | 000000000 | 000000 |
1108 Style Bushing | |||||||||
22mm | 22mm | 6mm | 2.8mm | 8° | 55 | Steel | Set Screws | 000000000 | 00000 |
1210 Style Bushing | |||||||||
22mm | 25mm | 6mm | 2.8mm | 8° | 175 | Steel | Set Screws | 000000000 | 00000 |
1610 Style Bushing | |||||||||
22mm | 25mm | 6mm | 2.8mm | 8° | 175 | Steel | Set Screws | 000000000 | 00000 |
2012 Style Bushing | |||||||||
22mm | 32mm | 6mm | 2.8mm | 8° | 280 | Steel | Set Screws | 000000000 | 00000 |
Split-Tapered Bushings

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. They're for use with split-tapered sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
Bushings with a machine key fit into a matching keyway on a sprocket or pulley for high-torque applications.
For technical drawings and 3-D models, click on a part number.
Quick-Grip Screw-Clamp Bushings

Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed. As you tighten the collar nut, the inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.
For technical drawings and 3-D models, click on a part number.
Self-Centering Screw-Clamp Bushings


A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket. They are also good for shock loads. When you tighten the included screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | OD | Overall Wd. | Max. Torque, in.-lbs. | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
22mm | 40mm | 30mm | 2,000 | 90 | Steel | Clamping Screws | 0000000 | 000000 |