All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water.

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Higher deflection ratings translate to greater vibration and shock isolation.

Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

Able to shoulder up to 1,500 psi per mounting point, nitrile pads can support heavy machinery.

These soft pads work well for isolating vibration with light loads such as lab and testing equipment.

Great for use outdoors, these durable pads are neoprene rubber, which withstands exposure to direct sunlight.

Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.

Shield surfaces from impact, reduce vibration and noise, and stabilize connection points with these packs of pads—they’re reinforced with fabric to endure extreme compression without deforming. They’re also known as bearing pads.

This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

Made from FDA-listed materials for use with food.

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

Sunlight, ozone, and water won’t affect these sheets and strips.

These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.

A cross between plastic and rubber, Santoprene offers good resistance to weather and chemicals while retaining its stretchability.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

With one layer of polyester fabric for every 1/16” of thickness, these sheets and strips maintain their size and shape under heavy compression better than the nonreinforced abrasion-resistant SBR.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

Made of FDA-listed materials, these sheets and strips are for use with food.

Filled with carbon black, these sheets won’t generate static charges and divert existing ones away from electronics. Use them as a conductor to protect components from static discharge.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

Greater tensile strength than standard Food-Grade Oil-Resistant Buna-N rubber gives these sheets and strips better shock-absorbing qualities and longer life. They’re made from FDA-listed materials for use with food and beverage and offer good resistance to animal and vegetable oils.

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.

To maintain their size and shape under heavy compression, these sheets have one layer of nylon fabric for every 1/16” of thickness. Use them as flange gaskets and diaphragm packing.

Viton® fluoroelastomer stands up to tough chemicals, such as nitric acid, ethylene glycol, and isopropyl alcohol.

With equal chemical resistance to Viton® fluoroelastomer, Aflas provides a stronger, steam-tolerant alternative.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other resilient foam.

When these sheets and strips are exposed to flames, the surface chars to create a protective barrier that prevents melting, dripping, and the possibility of spreading fire.

Also known as Ethafoam.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Made of Epichlorohydrin, an alternative to Buna-N, these foam sheets have excellent resistance to oil.

Cushion electronic components from impact as you protect them from electrostatic shocks during shipping and storing.

Stiff yet moldable, this foam takes the shape of any object that's pressed into it and will never spring back.

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.

Similar to a sponge, this open-cell foam absorbs and holds up to 30 times its weight in liquid.

Line toolboxes and drawers to cushion and protect small parts.

Made of 100% wool, this is the hardest felt we offer, yet it can still be used for polishing. It is more abrasion resistant and better at damping vibration than other felt. Includes S2-32, S2-24, and S2-20 felt grades.