Machine plastic and most metal with these high-speed steel tools.

The carbide tip brazed onto the ground steel shanks of these tools is more wear resistant than high-speed steel.

When cutting threads in nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic, diamond tips provide superior cutting performance.

Machine grooves in plastic and most metal with these high-speed steel tools.

Insert the square shank of these tools into the slot of a boring tool holder and use them to enlarge existing holes to precise diameters.

Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools.

Reduce tooling setup time—install the holder once and alternate between applications by switching out the bit.

These sets have five indexable turning tools with carbide inserts and a wood storage stand. When one edge of a tool's insert dulls, rotate it to use a sharp edge.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

Work faster by using two knurls at the same time.

Cut threads into most metal and plastic.

Use the extra-long shank to thread deep and hard-to-reach holes.

Often used for thread repair and occasional hand tapping, these carbon steel taps can thread holes in most metal and plastic, but they have a shorter tool life than standard taps.

The spiral flute design pulls chips back toward the tap, so chips won't accumulate in closed-end holes.

Clear chips while tapping deep and hard-to-reach holes. These taps have an extra-long shank for extended reach.

Drill holes and cut threads without switching tools.

Create oversized threads while keeping chips clear. These taps are sized for use in holes where the threads will shrink due to heat treatment or plating.

To tap nickel and other hard material, these cobalt steel taps have high cutting strength. Their flutes are designed to keep chips clear, so they don't need to be reversed to prevent buildup.

Tap threads into hardened steel and iron. These cobalt steel taps have straight flutes for high durability.

Create threads sized for pipe and conduit.

Use these carbon steel taps for thread repair and occasional tapping of pipe and conduit. They can tap threads into most metal and plastic, but they have a shorter tool life than standard taps.

Also known as interrupted-thread taps, these have extra space between the cutting threads, so large chips fall without packing and high amounts of lubricant can flow between the tap and the workpiece.

Use these taps on hardened steel pipe and conduit.

The cutting teeth are shaped to cut smooth threads in soft pipe and conduit material.

To extract taps of different sizes, these sets include multiple extractors. Use them with a tap wrench to remove taps with straight flutes from the workpiece without damaging the surrounding threads.