McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    70 Products

    High-Capacity Press-Fit Leveling Mount Inserts

    Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.
    For Square Legs
    Image of ProductInUse. Shown with Brass Insert Installed. Front orientation. Leveling Mount Inserts. High-Capacity Press-Fit Leveling Mount Inserts, For Square Legs.

    Shown with

    Brass

    Insert

    Installed

    Plastic—The economical choice. These inserts can handle more weight than inserts with brass threads, but may wear out more quickly if frequently adjusted.
    Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.
    For Leg
    Thread
    Outer
    Lg.
    Outer
    Wd.
    Inner
    Lg.
    Inner
    Wd.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Size
    Type
    Dp.
    Temp.,
    ° F
    Each
    Plastic
    Image of Attribute. Front orientation. Contains Annotated.
    1 1/2"1 1/2"1 1/4"1 1/4"3,5001 3/4"3/8"-16
    		UNC
    		1 1/4"-20 to 1706675N3200000
    1 1/2"1 1/2"1 1/4"1 1/4"3,5001 3/4"1/2"-13
    		UNC
    		1 1/4"-20 to 1706675N420000
    1 1/2"1 1/2"1 1/4"1 1/4"3,5001 3/4"5/8"-11
    		UNC
    		1 1/4"-20 to 1706675N520000
    1 1/2"1 1/2"1 1/4"1 1/4"3,5001 3/4"3/4"-10
    		UNC
    		1 1/4"-20 to 1706675N620000
    1 1/2"1 1/2"1 3/8"1 3/8"3,5001 3/4"3/8"-16
    		UNC
    		1 1/4"-20 to 1706675N310000
    1 1/2"1 1/2"1 3/8"1 3/8"3,5001 3/4"1/2"-13
    		UNC
    		1 1/4"-20 to 1706675N410000
    1 1/2"1 1/2"1 3/8"1 3/8"3,5001 3/4"5/8"-11
    		UNC
    		1 1/4"-20 to 1706675N510000
    1 1/2"1 1/2"1 3/8"1 3/8"3,5001 3/4"3/4"-10
    		UNC
    		1 1/4"-20 to 1706675N610000
    2"2"1 3/4"1 3/4"3,5002"3/8"-16
    		UNC
    		1"-20 to 1706675N350000
    2"2"1 3/4"1 3/4"3,5002"1/2"-13
    		UNC
    		1"-20 to 1706675N450000
    2"2"1 3/4"1 3/4"3,5002"5/8"-11
    		UNC
    		1"-20 to 1706675N550000
    2"2"1 3/4"1 3/4"3,5002"3/4"-10
    		UNC
    		1"-20 to 1706675N650000
    2"2"1 7/8"1 7/8"3,5002"3/8"-16
    		UNC
    		1"-20 to 1706675N340000
    2"2"1 7/8"1 7/8"3,5002"1/2"-13
    		UNC
    		1"-20 to 1706675N440000
    2"2"1 7/8"1 7/8"3,5002"5/8"-11
    		UNC
    		1"-20 to 1706675N540000
    2"2"1 7/8"1 7/8"3,5002"3/4"-10
    		UNC
    		1"-20 to 1706675N640000
     
    Plastic with Brass Insert
    Image of Attribute. Front orientation. Contains Annotated.
    1"1"7/8"7/8"1,1001 3/16"3/8"-16
    		UNC
    		7/8"30 to 19560945K560000
    1"1"7/8"7/8"1,1001 3/16"1/2"-13
    		UNC
    		7/8"30 to 19560945K570000
    1 3/16"1 3/16"1 1/16"1 1/16"1,2001 5/16"3/8"-16
    		UNC
    		7/8"30 to 19560945K5800000
    1 1/2"1 1/2"1 1/4"1 1/4"1,0001 11/16"3/8"-16
    		UNC
    		3/4"30 to 19560945K2500000
    1 1/2"1 1/2"1 1/4"1 1/4"1,0001 11/16"1/2"-13
    		UNC
    		3/4"30 to 19560945K2600000
    1 1/2"1 1/2"1 1/4"1 1/4"1,0001 11/16"5/8"-11
    		UNC
    		15/16"30 to 19560945K2700000
    1 1/2"1 1/2"1 1/4"1 1/4"1,0001 11/16"3/4"-10
    		UNC
    		1 1/8"30 to 19560945K2800000
    1 1/2"1 1/2"1 1/4"1 1/4"1,5001 3/4"3/8"-12
    		Acme
    		1 1/4"-20 to 18060945K360000
    1 1/2"1 1/2"1 1/4"1 1/4"1,5001 3/4"1/2"-10
    		Acme
    		1 1/4"-20 to 18060945K370000
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"M10 × 1.5 mmMetric
    		1"-20 to 18060945K750000
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"M12 × 1.75 mmMetric
    		1"-20 to 18060945K760000
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"M16 × 2 mmMetric
    		1"-20 to 18060945K770000
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"M20 × 2.5 mmMetric
    		1"-20 to 18060945K780000
    1 1/2"1 1/2"1 3/8"1 3/8"1,0001 11/16"3/8"-16
    		UNC
    		3/4"30 to 19560945K2100000
    1 1/2"1 1/2"1 3/8"1 3/8"1,0001 11/16"1/2"-13
    		UNC
    		3/4"30 to 19560945K2200000
    1 1/2"1 1/2"1 3/8"1 3/8"1,0001 11/16"5/8"-11
    		UNC
    		15/16"30 to 19560945K2300000
    1 1/2"1 1/2"1 3/8"1 3/8"1,0001 11/16"3/4"-10
    		UNC
    		1 1/8"30 to 19560945K2400000
    2"2"1 3/4"1 3/4"1,0001 15/16"3/8"-16
    		UNC
    		3/4"30 to 19560945K2900000
    2"2"1 3/4"1 3/4"1,0001 15/16"1/2"-13
    		UNC
    		3/4"30 to 19560945K3100000
    2"2"1 3/4"1 3/4"1,0001 15/16"5/8"-11
    		UNC
    		15/16"30 to 19560945K3200000
    2"2"1 3/4"1 3/4"1,7601 15/16"3/4"-10
    		UNC
    		1 1/8"30 to 19560945K3300000
    2"2"1 3/4"1 3/4"2,0002"3/8"-12
    		Acme
    		1"-20 to 18060945K380000
    2"2"1 3/4"1 3/4"2,0002"1/2"-10
    		Acme
    		1"-20 to 18060945K390000
    2"2"1 3/4"1 3/4"2,0002"M10 × 1.5 mmMetric
    		1"-20 to 18060945K790000
    2"2"1 3/4"1 3/4"2,0002"M12 × 1.75 mmMetric
    		1"-20 to 18060945K810000
    2"2"1 3/4"1 3/4"2,0002"M16 × 2 mmMetric
    		1"-20 to 18060945K820000
    2"2"1 3/4"1 3/4"2,0002"M20 × 2.5 mmMetric
    		1"-20 to 18060945K830000
    2"2"1 7/8"1 7/8"1,0001 15/16"3/8"-16
    		UNC
    		3/4"30 to 19560945K5200000
    2"2"1 7/8"1 7/8"1,0001 15/16"1/2"-13
    		UNC
    		3/4"30 to 19560945K5300000
    2"2"1 7/8"1 7/8"1,0001 15/16"5/8"-11
    		UNC
    		15/16"30 to 19560945K5400000
    2"2"1 7/8"1 7/8"1,7601 15/16"3/4"-10
    		UNC
    		1 1/8"30 to 19560945K5500000
     
    For Rectangular Legs
    Image of ProductInUse. Shown with Brass Insert Installed. Front orientation. Leveling Mount Inserts. High-Capacity Press-Fit Leveling Mount Inserts, For Rectangular Legs.
    Image of Attribute. Front orientation. Contains Annotated.

    Shown with

    Brass Insert

    Installed

    Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.
    For Leg
    Thread
    Outer
    Lg.
    Outer
    Wd.
    Inner
    Lg.
    Inner
    Wd.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Size
    Type
    Dp.
    Temp.,
    ° F
    Each
    Plastic with Brass Insert
    3"2"2 3/4"1 3/4"1,7601 15/16"5/8"-11
    		UNC
    		15/16"30 to 19560945K49000000
    3"2"2 3/4"1 3/4"1,7601 15/16"3/4"-10
    		UNC
    		1 1/8"30 to 19560945K5100000
     
    For Round Legs
    Image of ProductInUse. Shown with Brass Insert Installed. Front orientation. Leveling Mount Inserts. High-Capacity Press-Fit Leveling Mount Inserts, For Round Legs.
    Image of Attribute. Front orientation. Contains Annotated.

    Shown

    with

    Brass

    Insert

    Installed

    Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.
    For
    Leg
    Thread
    ID
    OD
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Size
    Type
    Dp.
    Temp.,
    ° F
    Each
    Plastic with Brass Insert
    1 3/8"1 1/2"1,0001 11/16"3/4"-10
    		UNC
    		1 1/8"30 to 19560945K42000000
    1 15/16"2"1,0001 15/16"5/8"-11
    		UNC
    		15/16"30 to 19560945K4600000
    1 15/16"2"1,7601 15/16"3/4"-10
    		UNC
    		1 1/8"30 to 19560945K4800000
     

    Press-Fit Leveling Mount Inserts

    Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.
    For Square Legs
    Image of ProductInUse. Front orientation. Leveling Mount Inserts. Press-Fit Leveling Mount Inserts, For Square Legs.
    Image of Attribute. Front orientation. Contains Annotated.
    Square inserts have flexible spring steel walls that grip the inside of the legs.
    For Leg
    Thread
    Outer
    Lg.
    Outer
    Wd.
    Inner
    Lg.
    Inner
    Wd.
    Cap. per
    Mount
    Overall
    Ht.
    Size
    Type
    Dp.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1"1"15/16"15/16"Not Rated1 1/16"1/4"-20
    		UNC
    		1/4"42417T2700000
    1"1"15/16"15/16"Not Rated1 1/16"5/16"-18
    		UNC
    		1/4"42417T280000
    1"1"15/16"15/16"Not Rated1 1/16"3/8"-16
    		UNC
    		1/4"42417T1100000
    1 1/4"1 1/4"1 3/16"1 3/16"Not Rated1 1/16"1/4"-20
    		UNC
    		1/4"42417T6100000
    1 1/4"1 1/4"1 3/16"1 3/16"Not Rated1 1/16"5/16"-18
    		UNC
    		1/4"42417T6200000
    1 1/4"1 1/4"1 3/16"1 3/16"Not Rated1 1/16"3/8"-16
    		UNC
    		1/4"42417T1200000
    1 1/2"1 1/2"1 7/16"1 7/16"Not Rated1 1/16"3/8"-16
    		UNC
    		1/4"42417T6300000
    1 1/2"1 1/2"1 7/16"1 7/16"Not Rated2 1/8"1/2"-13
    		UNC
    		1/2"12417T130000
    1 3/4"1 3/4"1 11/16"1 11/16"Not Rated2 1/16"1/2"-13
    		UNC
    		1/2"12417T1400000
    2"2"1 15/16"1 15/16"Not Rated2 1/16"1/2"-13
    		UNC
    		1/2"12417T1500000
     

    Press-Fit Rigid Leveling Mounts

    Push into the ends of chairs, tables, and other equipment with tubular legs to level them on uneven floors. Adjust these mounts up and down by turning the threaded base.
    For Square Legs
    Image of ProductInUse. Front orientation. Leveling Mounts. Press-Fit Rigid Leveling Mounts, For Square Legs.
    Image of Attribute. Front orientation. Contains Annotated. Press-Fit Rigid Leveling Mounts.
    Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor.
    For Leg
    Outer
    Lg.
    Outer
    Wd.
    Inner
    Lg.
    Inner
    Wd.
    Cap. per
    Mount, lb.
    Base
    Dia.
    Overall Ht.
    Each
    Plastic Base
    3/4"3/4"5/8"5/8"2201"3/8" to 1 1/8"4146T1100000
    7/8"7/8"3/4"3/4"2201"3/8" to 1 1/8"4146T120000
    1"1"7/8"7/8"3301"3/8" to 1 1/8"4146T130000
    1 3/16"1 3/16"1 1/16"1 1/16"6601 1/4"3/8" to 1"4146T140000
    1 3/8"1 3/8"1 1/4"1 1/4"6601 1/4"3/8" to 1"4146T150000
    1 1/2"1 1/2"1 3/8"1 3/8"6601 1/4"3/8" to 1"4146T160000
    1 3/4"1 3/4"1 5/8"1 5/8"6601 3/4"3/8" to 1 5/16"4146T1700000
    2"2"1 15/16"1 15/16"6601 3/4"3/8" to 1 5/16"4146T1800000
     
    back to top