McMaster-Carr logo
    Filter by
    Jack Type
    Handle Location
    Working Orientation
    Mounting Plate Diameter
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Weight Capacity per Pair
    DFARS Specialty Metals
    Mounting Plate Width
    Wheel Material
    Hole Diameter
    Mounting Plate Length
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    41 Products

    Leveling Jacks

    Image of Product. Side Handle Style A. Front orientation. Contains Annotated. Jacks. Leveling Jacks, Side Mount, Rectangular Mounting Plate, Side Handle, Style A.
    Image of Product. Top Handle Style A. Front orientation. Contains Annotated. Jacks. Leveling Jacks, Side Mount, Rectangular Mounting Plate, Top Handle, Style A.
    Image of Product. Side Handle Style B. Front orientation. Contains Annotated. Jacks. Leveling Jacks, Side Mount, Tubular Mounting Plate, Side Handle, Style B.
    Image of Product. Top Handle Style B. Front orientation. Contains Annotated. Jacks. Leveling Jacks, Side Mount, Tubular Mounting Plate, Top Handle, Style B.

    Side

    Handle Style A

    Top

    Handle Style A

    Side

    Handle Style

    B

    Top

    Handle Style B

    Image of Product. Front orientation. Contains Annotated. Jacks. Leveling Jacks, Top Handle, Style C.
    Image of Product. Front orientation. Contains Annotated. Jacks. Leveling Jacks, Top Handle, Style D.
    Image of Product. Front orientation. Contains Annotated. Jacks. Leveling Jacks, Top Handle, Style E.

    Top Handle

    Style C

    Top Handle

    Style D

    Top Handle

    Style E

    Mount these jacks to equipment to raise and level it.
    Warning: Never use to support people or loads over people.
    Through-Hole Mount—Mount jacks through a hole in the frame of equipment and fasten the mounting plate.
    Side Mount—Weld the included mount to equipment then attach the jack to the mount. A pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
    Triangular Mounting Plate—Jacks with triangular plate can also be welded onto your equipment. They’re commonly used with an A-frame trailer coupler.
    Foot Plate—Jacks with foot plate have extra stability.
    Mounting
    Style
    Weight Capacity
    Ht.
    Max.
    Lift
    Overall
    Ht.
    Handle
    Lg.
    Body
    Material
    For Hole
    Dia.
    Fasteners
    Included
    No. of
    Holes
    Hole
    Dia.
    Hole
    Lg.
    Hole
    Wd.
    Features
    Each
    Weld On Side Mount with Rectangular Mounting Plate
     
    Side Handle
    A1 ton/2,000 lb.10 7/8" to 20 7/8"10"22 3/4"5 7/8"Steel——————Foot Plate2963T440000000
    A2 1/2 ton/5,000 lb.10 3/8" to 20 3/8"10"22 7/8"6 1/2"Steel——————Foot Plate2963T4800000
    A2 1/2 ton/5,000 lb.15 3/8" to 30 3/8"15"27 7/8"6 1/2"Steel——————Foot Plate2963T49000000
     
    Top Handle
    A2 1/2 ton/5,000 lb.14 1/2" to 29 1/2"15"27 1/2"7 5/8"Steel——————Foot Plate2963T35000000
     
    Weld On Side Mount with Square Mounting Plate
     
    Side Handle
    A1 ton/2,000 lb.15" to 30 1/2"15 1/2"32 3/4"6 1/8"Steel——————Foot Plate2963T52000000
     
    Top Handle
    A1 ton/2,000 lb.14 3/4" to 29 3/4"15"30"6"Steel——————Foot Plate2963T5100000
     
    Weld On Side Mount with Tubular Mounting Plate
     
    Side Handle
    B1 ton/2,000 lb.10 7/8" to 20 7/8"10"23"5 7/8"Steel——————Foot Plate2963T71000000
    B1 ton/2,000 lb.15" to 30 1/2"15 1/2"32 3/4"6 1/8"Steel——————Foot Plate2963T53000000
    B2 1/2 ton/5,000 lb.10 1/2" to 20 1/2"10"23"6 1/2"Steel——————Foot Plate2963T73000000
    B2 1/2 ton/5,000 lb.15 1/2" to 30 1/2"15"28"6 1/2"Steel——————Foot Plate2963T74000000
    B3 1/2 ton/7,000 lb.11" to 21"10"25 5/8"8 1/2"Steel——————Foot Plate2963T75000000
    B5 ton/10,000 lb.17" to 29 5/8"12 5/8"39 1/2"13 1/2"Steel——————Foot Plate2963T81000000
     
    Top Handle
    B2 1/2 ton/5,000 lb.11 1/4" to 21 1/4"10"18"7 5/8"Steel——————Foot Plate2963T18000000
     
    Bolt On/Through Hole with Triangular Mounting Plate
     
    Top Handle
    C2 1/2 ton/5,000 lb.10 1/8" to 25 1/8"15"24 1/8"7 5/8"Steel2 1/4"No3—7/16"13/16"Foot Plate2933T6100000
     
    Bolt On/Weld On/Through Hole with Triangular Mounting Plate
     
    Top Handle
    D2 1/2 ton/5,000 lb.10 7/8" to 25 7/8"15"24 3/8"7 5/8"Steel2 1/4"No3—7/16"13/16"—2933T35000000
     
    Bolt On/Through Hole with Round Mounting Plate
     
    Top Handle
    E2 1/2 ton/5,000 lb.4 1/2" to 13 1/2"9"19 3/4"8 3/4"Steel1 1/4"No61/4"——Foot Plate, Slip-Resistant Rubber Pad2953T1000000
    E2 1/2 ton/5,000 lb.4 1/2" to 21 1/2"17"27 3/4"8 7/8"Steel1 1/4"No61/4"——Foot Plate, Slip-Resistant Rubber Pad2953T200000
    E2 1/2 ton/5,000 lb.4 1/2" to 25 1/2"21"31 3/4"8 3/4"Steel1 1/4"No61/4"——Foot Plate, Slip-Resistant Rubber Pad2953T3000000
     

    Leveling Jacks with Wheel

    Image of Product. Style A. Front orientation. Contains Annotated. Style A. Leveling Jacks with Wheel.
    Image of Product. Style B. Front orientation. Contains Annotated. Style B. Leveling Jacks with Wheel.
    Image of Product. Style C. Front orientation. Contains Annotated. Style C. Leveling Jacks with Wheel.
    Image of Product. Front orientation. Contains Annotated. Jacks. Leveling Jacks with Wheel, Style D.

    Style A

    Style B

    Style C

    Style D

    Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.
    Warning: Never use to support people or loads over people.
    Through-Hole Mount—Mount jacks through a hole in the frame of your equipment and fasten the mounting plate. These jacks are commonly used with an A-frame trailer coupler.
    Side Mount—Slide the frame of your equipment through the mounting plate.
    Locking Pin—Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
    For
    Frame
    Mounting
    Mounting
    Plate
    Style
    Weight Capacity
    Ht.
    Max.
    Lift
    Overall
    Ht.
    Ht.
    Dp.
    Handle
    Lg.
    Body
    Material
    For Hole
    Dia.
    Fasteners
    Included
    No. of
    Holes
    Hole
    Lg.
    Hole
    Wd.
    Lg.
    Wd.
    Wheel
    Material
    Each
    Clamp On Side Mount
    A1/4 ton/750 lb.7 1/2" to 23 1/2"16"27 7/8"0" to 5"1 7/8" to 2 7/8"5 1/2"Steel—Yes—————Plastic2958T60000000
    B1/2 ton/1,000 lb.10 13/16" to 25 1/2"14 11/16"33 7/8"3" to 5"2" to 3"6 1/8"Steel—Yes—————Plastic8792T31000000
     
    Clamp On Side Mount with Locking Pin
    C1/2 ton/1,200 lb.12 1/2" to 22 1/2"10"28 1/8"2" to 4"1 1/2" to 3"6"Steel—Yes—————Plastic8792T44000000
    C3/4 ton/1,500 lb.12 7/8" to 22 7/8"10"31 5/8"3" to 5"2" to 3"6 1/8"Steel—Yes—————Plastic8792T32000000
     
    Bolt On/Through-Hole Mount
    D1/2 ton/1,200 lb.8 5/8" to 21 1/2"12 7/8"35 5/8"——6 1/2"Steel2 1/4"No37/16"13/16"5 1/8"4 1/4"Plastic2933T62000000
     

    Screw Jack Stands

    Hold and adjust the height of heavy loads such as truck trailers. The screw adjustment lets you make small changes to the height of your load.
    Note: Jack stands should not be moved when under load.
    Warning: Never use to support people or loads over people.
    Stationary
    Image of Product. Front orientation. Jack Stands. Screw Jack Stands, Stationary.
    Image of Product. Replacement Grip. Front orientation.

    Replacement Grip

    Saddle
    Wt. Cap.
    Holding Cap.
    Ht.
    Max.
    Lift
    Lg.
    Wd.
    Base
    Dia.
    Each
    2 1/2 ton/5,000 lb.25 ton/50,000 lb.44" to 51"7"5"5"14"8817T610000000
     
    Replacement Grips
    Each
    Grip for Stationary Jack Stands8817T79000000
    Rolling
    Image of Product. Front orientation. Jack Stands. Screw Jack Stands, Rolling, Two Axle-Mounted Wheels.
    Image of Product. Front orientation. Jack Stands. Screw Jack Stands, Rolling, Three Axle-Mounted Wheels.
    Image of Product. Replacement Grip. Front orientation.

    Two

    Axle-Mounted

    Wheels

    Three Axle-Mounted

    Wheels

    Replacement Grip

    Image of Product. Replacement Handle. Front orientation.
    Image of Product. Replacement Saddle. Front orientation.
    Image of Product. Replacement Wheel Kit. Front orientation.

    Replacement Handle

    Replacement Saddle

    Replacement Wheel Kit

    Image of Product. Replacement Wheel. Front orientation.

    Replacement Wheel

    Saddle
    Base
    Wt. Cap.
    Holding Cap.
    Ht.
    Max.
    Lift
    Dia.
    Lg.
    Wd.
    Lg.
    Wd.
    Handle
    Lg.
    Wheel
    Material
    Features
    Each
    Two Axle-Mounted Wheels
    20 ton/40,000 lb.50 ton/100,000 lb.39" to 51"12"8"——16"17 5/8"20"Rubber
    		Removable Handle8817T620000000
     
    Three Axle-Mounted Wheels
    20 ton/40,000 lb.50 ton/100,000 lb.40" to 51"11"—24"6"16"17 5/8"20"Rubber, SteelRemovable Handle8817T74000000
     
    Replacements for Jack Stands
    Each
    Grip for Two and Three Axle-Mounted Wheel Jack Stands8817T7800000
    Handle for Two and Three Axle-Mounted Wheel Jack Stands (Includes 1 Grip)8817T7700000
    Saddle for Two Axle-Mounted Wheel Jack Stands8817T81000000
    Steel Wheel for Three Axle-Mounted Wheel Jack Stands8817T8300000
    Rubber Wheel Kit for Two and Three Axle-Mounted Wheel Jack Stands (Includes 1 Axle, 1 Cotter Pin, 2 Wheels)8817T75000000

    Jack Stands—Not for Lifting

    Image of Product. Front orientation. Jack Stands. Jack Stands—Not for Lifting, Style A.
    Image of Product. Front orientation. Jack Stands. Jack Stands—Not for Lifting, Style B.
    Image of Product. Front orientation. Jack Stands. Jack Stands—Not for Lifting, Style C.

    Style A

    Style B

    Style C

    After raising a load, add these steel stands for support.
    Note: Do not raise or lower stands while under load. Always use stands in pairs and on a hard, flat surface.
    Warning: Never use to support people or loads over people.
    Locking-Handle Adjustment—Locking handles lock the ratchet bar in place to support the load.
    Locking-Pin Adjustment—Locking pins are inserted through the riser to lock the bar in place.
    Saddle
    Base
    Style
    Wt. Cap.
    per Pair
    Ht.
    Ht. Adjustment
    Increments
    Lg.
    Wd.
    Dia.
    Lg.
    Wd.
    Pair
    Locking-Handle Adjustment
    A6 ton/12,000 lb.12" to 17 3/4"9/16"1"3 1/2"—7 1/2"8 1/4"8059T310000000
    A12 ton/24,000 lb.15 5/8" to 23 3/4"11/16"1 1/4"4 1/4"—10 3/8"11 5/8"8059T32000000
     
    Locking-Pin Adjustment
    B12 ton/24,000 lb.19" to 29 1/2"1 1/2"3"6"15 7/8"——8059T33000000
    C44 ton/88,000 lb.13 7/8" to 19 7/8"3"3"3 3/4"—11"11"8059T35000000
     

    Ratchet Jack Stands

    The ratcheting action of these jacks stands makes adjusting them under load easier than screw jack stands. Use them to hold and adjust the height of heavy loads such as truck trailers.
    Note: Jack stands should not be moved when under load.
    Warning: Never use to support people or loads over people.
    Rolling
    Image of Product. Front orientation. Jack Stands. Ratchet Jack Stands, Rolling, Two Axle-Mounted Wheels.
    Image of Product. Front orientation. Jack Stands. Ratchet Jack Stands, Rolling, Three Axle-Mounted Wheels.
    Image of Product. Replacement Grip. Front orientation.

    Two

    Axle-Mounted

    Wheels

    Three Axle-Mounted Wheels

    Replacement Grip

    Image of Product. Replacement Handle. Front orientation.
    Image of Product. Replacement Saddle. Front orientation.
    Image of Product. Replacement Wheel Kit. Front orientation.

    Replacement Handle

    Replacement Saddle

    Replacement Wheel Kit

    Image of Product. Replacement Wheel. Front orientation.

    Replacement Wheel

    Saddle
    Base
    Wt. Cap.
    Holding Cap.
    Ht.
    Max.
    Lift
    Dia.
    Lg.
    Wd.
    Lg.
    Wd.
    Handle
    Lg.
    Wheel
    Material
    Features
    Each
    Two Axle-Mounted Wheels
    20 ton/40,000 lb.50 ton/100,000 lb.39" to 51"12"8"——16"17 5/8"20"Rubber
    		Removable Handle8817T630000000
     
    Three Axle-Mounted Wheels
    20 ton/40,000 lb.50 ton/100,000 lb.40" to 51"11 1/2"—24"6"16"17 5/8"20"Rubber, SteelRemovable Handle8817T67000000
     
    Replacements for Jack Stands
    Each
    Grip for Two and Three Axle-Mounted Wheel Jack Stands8817T7800000
    Handle for Two and Three Axle-Mounted Wheel Jack Stands (Includes 1 Grip)8817T7700000
    Saddle for Two Axle-Mounted Wheel Jack Stands8817T82000000
    Steel Wheel for Three Axle-Mounted Wheel Jack Stands8817T8300000
    Rubber Wheel Kit for Two and Three Axle-Mounted Wheel Jack Stands (Includes 1 Axle, 1 Cotter Pin, 2 Wheels)8817T75000000

    Scaffold Leveling Jacks

    Image of ProductInUse. Front orientation. Jacks. Scaffold Leveling Jacks.
    Image of Product. Front orientation. Jacks. Scaffold Leveling Jacks.
    Swap these jacks with the base plates on your scaffold to create a level foundation on uneven ground. They adjust in increments less than an inch, so you can set each leg of your scaffold to the exact height you need. Made from galvanized steel, these jacks resist rust and hold up to outdoor use. For safety and stability, the top 6" of the threaded stud slides into the scaffold frame and isn’t usable.
    Note: Leveling jacks meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Hollow—Hollow jacks are lighter in weight than solid jacks, so they’re easier to handle.
    Overall
    Base
    Thread
    Base Mount
    Wt. Cap.,
    lb.
    Max.
    Lift
    Ht.
    Wd.
    Lg.
    Wd.
    For
    ID
    Material
    Size
    Lg.
    Fasteners
    Included
    No. of
    Holes
    Hole
    Dia.
    Hole
    Ctr.-to-Ctr.
    Wt.,
    lb.
    Specs. Met
    Each
    Hollow
    5,30018"24"9 3/8"5 5/16"5 5/16"1 1/2"Galvanized Steel1 3/8"-4
    		16 9/16"No41/2"3 5/16"6Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517819N11000000
     
    Solid
    15,50018"24"9 3/8"5 5/16"5 5/16"1 1/2"Galvanized Steel1 3/8"-4
    		16 9/16"No41/2"3 5/16"11Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517819N1200000
     
    back to top