From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Compare the appearance choices of our 304 stainless steel with these convenient selector packs.

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

This material has tighter tolerances than standard 303 stainless steel.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.

One side of these sheets is polished to either a brushed or mirror-like finish.

Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.

2205 stainless steel resists cracking even when faced with a combination of tensile stress, corrosive chemicals, and heat. Also known as duplex stainless steel, it has twice the strength of 316 stainless steel. Use it for high-pressure applications in caustic environments.

Precision ground on the top and bottom to a tight tolerance.

One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.

Hardened for superior wear resistance, these rods are precision ground to a tight diameter tolerance so they’re ready for turning in a lathe.

This material is hardened for increased wear resistance over standard 420 stainless steel.

With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.

The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications.

One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.

This material is hardened for improved strength and wear resistance.

As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.

309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.

Identify equipment by engraving or stamping one of these sturdy metal tags and hanging it with a wire.

Tags are corrosion-resistant stainless steel so they hold up in harsh environments. Write on these tags with a permanent marker.

Metal tags are more durable than plastic tags.

Metal plates are more durable than plastic plates.

Characters are stamped and filled with black enamel, or engraved to reveal a contrasting color.

Characters are stamped and filled with black enamel, or engraved to reveal a contrasting color.

Embossing produces raised characters similar to a license plate. This is useful in washdown applications where engraved or stamped impressions may fill with water or wear away.

For use with Dymo Rhino M1011 embossing label printers.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth.

Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

Polished to a 15 Ra and under finish, these fittings have a mirror smooth interior. They are also known as ultra-high-purity fittings.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Also known as Code 61 SAE hydraulic flanges.

Also known as Code 61 SAE hydraulic flanges.

Close off unused switches and outlets.

Close off unused switches and outlets.

Cut this 12" stock to the length you need.

These hinges are made of metal.

The leaves of these hinges almost touch when the door is closed. They are often used in electrical enclosures for a tight seal.