About Nuts, Materials, and Finishes
More
Stainless Steel Press-Fit Nuts for Sheet Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/964/96439a250p1-b01-digitall@halfx_637066430419641250.png?ver=imagenotfound)
These nuts have good chemical resistance and may be mildly magnetic. Also known as clinch style captive nuts, press them into a drilled or punched hole with an arbor press or similar pressure tool. Installation requires access to both sides of the panel. Knurls on the bottom of the nut hold them firmly in place.
For technical drawings and 3-D models, click on a part number.
Press-Fit Nuts | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Head | Installation Tool | |||||||||
Thread Size | Drill Bit Size | For Min. Panel Thick. | OD | Ht. | PEM® Part No. | Pkg. Qty. | Pkg. | Each | ||
18-8 Stainless Steel | ||||||||||
2-56 | No. 19 | 0.03" | 0.25" | 0.07" | CLS-256-0 | 25 | 000000000 | 00000 | 000000000 | 0000000 |
2-56 | No. 19 | 0.04" | 0.25" | 0.07" | CLS-256-1 | 25 | 000000000 | 0000 | 000000000 | 000000 |
2-56 | No. 19 | 0.056" | 0.25" | 0.07" | CLS-256-2 | 25 | 000000000 | 0000 | 000000000 | 000000 |
2-56 | No. 29 | 0.025" | 0.22" | 0.065" | SMPS-256 | 25 | 000000000 | 0000 | 000000 | 00 |
3-48 | No. 19 | 0.03" | 0.25" | 0.07" | CLS-348-0 | 10 | 000000000 | 0000 | 000000 | 00 |
3-48 | No. 19 | 0.04" | 0.25" | 0.07" | CLS-348-1 | 10 | 000000000 | 0000 | 000000 | 00 |
4-40 | No. 19 | 0.025" | 0.22" | 0.065" | SMPS-440 | 25 | 000000000 | 0000 | 000000 | 00 |
4-40 | No. 19 | 0.03" | 0.25" | 0.07" | CLS-440-0 | 25 | 000000000 | 0000 | 000000000 | 000000 |
4-40 | No. 19 | 0.04" | 0.25" | 0.07" | CLS-440-1 | 25 | 000000000 | 0000 | 000000000 | 000000 |
4-40 | No. 19 | 0.056" | 0.25" | 0.07" | CLS-440-2 | 25 | 000000000 | 0000 | 000000000 | 000000 |
4-40 | No. 19 | 0.09" | 0.25" | 0.07" | CLS-440-3 | 25 | 000000000 | 0000 | 000000000 | 000000 |
6-32 | 3/16" | 0.025" | 0.252" | 0.065" | SMPS-632 | 25 | 000000000 | 0000 | 000000 | 00 |
6-32 | 3/16" | 0.03" | 0.28" | 0.07" | CLS-632-0 | 25 | 000000000 | 0000 | 000000000 | 000000 |
6-32 | 3/16" | 0.04" | 0.28" | 0.07" | CLS-632-1 | 25 | 000000000 | 0000 | 000000000 | 000000 |
6-32 | 3/16" | 0.056" | 0.28" | 0.07" | CLS-632-2 | 25 | 000000000 | 0000 | 000000000 | 000000 |
6-32 | 3/16" | 0.09" | 0.28" | 0.07" | CLS-632-3 | 25 | 000000000 | 0000 | 000000000 | 000000 |
8-32 | No. 3 | 0.03" | 0.31" | 0.09" | CLS-832-0 | 10 | 000000000 | 0000 | 000000000 | 000000 |
8-32 | No. 3 | 0.04" | 0.31" | 0.09" | CLS-832-1 | 25 | 000000000 | 0000 | 000000000 | 000000 |
8-32 | No. 3 | 0.056" | 0.31" | 0.09" | CLS-832-2 | 25 | 000000000 | 0000 | 000000000 | 000000 |
8-32 | No. 3 | 0.09" | 0.31" | 0.09" | CLS-832-3 | 25 | 000000000 | 0000 | 000000000 | 000000 |
10-24 | 1/4" | 0.03" | 0.34" | 0.09" | CLSS-024-0 | 10 | 000000000 | 0000 | 000000000 | 000000 |
10-24 | 1/4" | 0.04" | 0.34" | 0.09" | CLSS-024-1 | 10 | 000000000 | 0000 | 000000000 | 000000 |
10-24 | 1/4" | 0.056" | 0.34" | 0.09" | CLSS-024-2 | 10 | 000000000 | 0000 | 000000000 | 000000 |
10-24 | 1/4" | 0.09" | 0.34" | 0.09" | CLSS-024-3 | 10 | 000000000 | 0000 | 000000000 | 000000 |
10-32 | 1/4" | 0.03" | 0.34" | 0.09" | CLSS-032-0 | 10 | 000000000 | 0000 | 000000000 | 000000 |
10-32 | 1/4" | 0.04" | 0.34" | 0.09" | CLSS-032-1 | 10 | 000000000 | 0000 | 000000000 | 000000 |
10-32 | 1/4" | 0.056" | 0.34" | 0.09" | CLSS-032-2 | 10 | 000000000 | 0000 | 000000000 | 000000 |
10-32 | 1/4" | 0.09" | 0.34" | 0.09" | CLSS-032-3 | 10 | 000000000 | 0000 | 000000000 | 000000 |
12-24 | J | 0.04" | 0.37" | 0.13" | CLS-1224-1 | 5 | 000000000 | 0000 | 000000 | 00 |
12-24 | J | 0.056" | 0.37" | 0.13" | CLS-1224-2 | 10 | 000000000 | 0000 | 000000 | 00 |
12-24 | J | 0.09" | 0.37" | 0.13" | CLS-1224-3 | 10 | 000000000 | 0000 | 000000 | 00 |
1/4"-20 | 11/32" | 0.047" | 0.44" | 0.17" | CLS-0420-0 | 10 | 000000000 | 0000 | 000000 | 00 |
1/4"-20 | 11/32" | 0.056" | 0.44" | 0.17" | CLS-0420-1 | 10 | 000000000 | 0000 | 000000 | 00 |
1/4"-20 | 11/32" | 0.09" | 0.44" | 0.17" | CLS-0420-2 | 5 | 000000000 | 0000 | 000000 | 00 |
1/4"-20 | 11/32" | 0.125" | 0.44" | 0.17" | CLS-0420-3 | 5 | 000000000 | 0000 | 000000 | 00 |
1/4"-28 | 11/32" | 0.056" | 0.44" | 0.17" | CLS-0428-1 | 5 | 000000000 | 0000 | 000000 | 00 |
1/4"-28 | 11/32" | 0.09" | 0.44" | 0.17" | CLS-0428-2 | 5 | 000000000 | 0000 | 000000 | 00 |
5/16"-18 | Z | 0.056" | 0.5" | 0.23" | CLS-0518-1 | 5 | 000000000 | 0000 | 000000 | 00 |
5/16"-18 | Z | 0.09" | 0.5" | 0.23" | CLS-0518-2 | 5 | 000000000 | 0000 | 000000 | 00 |
5/16"-18 | Z | 0.125" | 0.5" | 0.23" | CLS-0518-3 | 5 | 000000000 | 0000 | 000000 | 00 |
3/8"-16 | 1/2" | 0.09" | 0.56" | 0.27" | CLS-0616-1 | 5 | 000000000 | 0000 | 000000 | 00 |
3/8"-16 | 1/2" | 0.125" | 0.56" | 0.27" | CLS-0616-2 | 5 | 000000000 | 0000 | 000000 | 00 |
3/8"-16 | 1/2" | 0.25" | 0.56" | 0.27" | CLS-0616-3 | 1 | 000000000 | 0000 | 000000 | 00 |
1/2"-13 | 21/32" | 0.125" | 0.81" | 0.36" | CLS-0813-1 | 1 | 000000000 | 0000 | 000000 | 00 |
1/2"-13 | 21/32" | 0.25" | 0.81" | 0.36" | CLS-0813-2 | 1 | 000000000 | 0000 | 000000 | 00 |
Metric Stainless Steel Press-Fit Nuts for Sheet Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/964/96439a650-@halfx_637060468829150588.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/976/97648a470p1-b01-digitall@halfx_637178801141573225.png?ver=imagenotfound)
Made from 18-8 stainless steel, these nuts have good chemical resistance and may be mildly magnetic. Also known as clinch style captive nuts, press these into a drilled or punched hole with an arbor press or similar pressure tool. Installation requires access to both sides of the panel. Knurls on the bottom of the nut hold them firmly in place.
For technical drawings and 3-D models, click on a part number.
Press-Fit Nuts | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Head | Installation Tool | |||||||||
Size | Pitch, mm | Drill Bit Size | For Min. Panel Thick., mm | OD, mm | Wd., mm | Ht., mm | Pkg. Qty. | Pkg. | Each | ||
18-8 Stainless Steel | |||||||||||
Round Head | |||||||||||
M2 | 0.4 | 4.2 mm | 0.8 | 6.35 | __ | 1.5 | 10 | 000000000 | 00000 | 000000000 | 0000000 |
M2 | 0.4 | 4.2 mm | 1 | 6.35 | __ | 1.5 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M2 | 0.4 | 4.2 mm | 1.4 | 6.35 | __ | 1.5 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M2.5 | 0.45 | 3.8 mm | 0.64 | 5.6 | __ | 1.4 | 25 | 000000000 | 0000 | 000000 | 00 |
M2.5 | 0.45 | 4.2 mm | 0.8 | 6.35 | __ | 1.5 | 25 | 000000000 | 0000 | 000000000 | 000000 |
M2.5 | 0.45 | 4.2 mm | 1 | 6.35 | __ | 1.5 | 25 | 000000000 | 0000 | 000000000 | 000000 |
M2.5 | 0.45 | 4.2 mm | 1.4 | 6.35 | __ | 1.5 | 25 | 000000000 | 0000 | 000000000 | 000000 |
M3 | 0.5 | 4.2 mm | 0.64 | 5.6 | __ | 1.4 | 25 | 000000000 | 0000 | 000000 | 00 |
M3 | 0.5 | 4.2 mm | 0.8 | 6.35 | __ | 1.5 | 25 | 000000000 | 0000 | 000000000 | 000000 |
M3 | 0.5 | 4.2 mm | 1 | 6.35 | __ | 1.5 | 25 | 000000000 | 0000 | 000000000 | 000000 |
M3 | 0.5 | 4.2 mm | 1.4 | 6.35 | __ | 1.5 | 25 | 000000000 | 0000 | 000000000 | 000000 |
M3.5 | 0.6 | 4.8 mm | 0.8 | 7.11 | __ | 1.5 | 10 | 000000000 | 0000 | 000000 | 00 |
M3.5 | 0.6 | 4.8 mm | 1 | 7.11 | __ | 1.5 | 10 | 000000000 | 0000 | 000000 | 00 |
M3.5 | 0.6 | 4.8 mm | 1.4 | 7.11 | __ | 1.5 | 10 | 000000000 | 0000 | 000000 | 00 |
M4 | 0.7 | 5.4 mm | 0.8 | 7.87 | __ | 2 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M4 | 0.7 | 5.4 mm | 1 | 7.87 | __ | 2 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M4 | 0.7 | 5.4 mm | 1.4 | 7.87 | __ | 2 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M5 | 0.8 | 6.4 mm | 0.8 | 8.64 | __ | 2 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M5 | 0.8 | 6.4 mm | 1 | 8.64 | __ | 2 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M5 | 0.8 | 6.4 mm | 1.4 | 8.64 | __ | 2 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M6 | 1 | 8.8 mm | 1.2 | 11.18 | __ | 4.08 | 5 | 000000000 | 0000 | 000000 | 00 |
M6 | 1 | 8.8 mm | 1.4 | 11.18 | __ | 4.08 | 5 | 000000000 | 0000 | 000000 | 00 |
M6 | 1 | 8.8 mm | 2.29 | 11.18 | __ | 4.08 | 5 | 000000000 | 0000 | 000000 | 00 |
M8 | 1.25 | 10.5 mm | 1.4 | 12.7 | __ | 5.47 | 5 | 000000000 | 0000 | 000000 | 00 |
M8 | 1.25 | 10.5 mm | 2.29 | 12.7 | __ | 5.47 | 5 | 000000000 | 0000 | 000000 | 00 |
M10 | 1.5 | 14 mm | 2.29 | 17.35 | __ | 7.48 | 1 | 000000000 | 0000 | 000000 | 00 |
M10 | 1.5 | 14 mm | 3.18 | 17.35 | __ | 7.48 | 1 | 000000000 | 0000 | 000000 | 00 |
Hex Head | |||||||||||
M3 | 0.5 | 4.5 mm | 1 | __ | 5.5 | 2.1 | 10 | 000000000 | 0000 | 000000 | 00 |
M4 | 0.7 | 5.5 mm | 1 | __ | 7 | 2.3 | 10 | 000000000 | 00000 | 000000 | 00 |
M5 | 0.8 | 6.5 mm | 1 | __ | 8 | 3.1 | 10 | 000000000 | 00000 | 000000 | 00 |
M6 | 1 | 8.0 mm | 1 | __ | 10 | 4.1 | 5 | 000000000 | 0000 | 000000 | 00 |
M8 | 1.25 | 10.0 mm | 2 | __ | 13 | 4.7 | 1 | 000000000 | 0000 | 000000 | 00 |
M10 | 1.5 | 12.5 mm | 2 | __ | 15 | 6.2 | 1 | 000000000 | 0000 | 000000 | 00 |
M12 | 1.75 | 14.5 mm | 3 | __ | 17 | 7.2 | 1 | 000000000 | 0000 | 000000 | 00 |
Flush-Mount Press-Fit Nuts for Sheet Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/946/94674a515_91cf09d3-b244-4c73-90db-03fab3859fa4@halfx_638044865172215919.png?ver=imagenotfound)
A flat hex head sits flush against the material surface for use in low-clearance applications. Press them into a drilled or punched hole with an installation tool or an arbor press. Installation requires access to both sides of the panel. Made from 18-8 stainless steel, they're chemical resistant and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/946/9467al1-i187-rev1671041105-p9@halfx_638066163074818027.png?ver=imagenotfound)
Flange | Press-Fit Nuts | |||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Drill Bit Size | For Min. Panel Thick. | Wd. | Thick. | Ht. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
4-40 | No. 20 | 0.04" | 3/16" | 0.01" | 0.036" | 25 | 000000000 | 000000 |
4-40 | No. 20 | 0.062" | 3/16" | 0.02" | 0.058" | 25 | 000000000 | 00000 |
4-40 | No. 20 | 0.125" | 3/16" | 0.03" | 0.117" | 10 | 000000000 | 00000 |
6-32 | 13/64" | 0.062" | 1/4" | 0.02" | 0.058" | 25 | 000000000 | 00000 |
6-32 | 13/64" | 0.125" | 1/4" | 0.03" | 0.117" | 25 | 000000000 | 00000 |
8-32 | 17/64" | 0.062" | 5/16" | 0.02" | 0.058" | 25 | 000000000 | 00000 |
8-32 | 17/64" | 0.125" | 5/16" | 0.03" | 0.117" | 10 | 000000000 | 00000 |
10-32 | 17/64" | 0.093" | 5/16" | 0.03" | 0.085" | 25 | 000000000 | 00000 |
10-32 | 17/64" | 0.125" | 5/16" | 0.03" | 0.117" | 25 | 000000000 | 00000 |
1/4"-20 | W | 0.125" | 7/16" | 0.03" | 0.117" | 10 | 000000000 | 0000 |
1/4"-20 | W | 0.187" | 7/16" | 0.03" | 0.177" | 10 | 000000000 | 00000 |
1/4"-20 | W | 0.375" | 7/16" | 0.03" | 0.359" | 10 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/946/9467al1-i187-rev1671041105-p9@halfx_638066163074818027.png?ver=imagenotfound)
Thread | Flange | Press-Fit Nuts | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Drill Bit Size | For Min. Panel Thick., mm | Wd., mm | Thick., mm | Ht., mm | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
M2 | 0.4 | 4.4 mm | 1.53 | 4.8 | 0.5 | 1.53 | 10 | 000000000 | 00000 |
M2.5 | 0.45 | 4.4 mm | 1.53 | 4.8 | 0.5 | 1.53 | 25 | 000000000 | 00000 |
M3 | 0.5 | 4.4 mm | 1.53 | 4.8 | 0.5 | 1.53 | 25 | 000000000 | 00000 |
M3 | 0.5 | 4.4 mm | 2.32 | 4.8 | 0.6 | 2.3 | 25 | 000000000 | 00000 |
M4 | 0.7 | 7.4 mm | 1.53 | 7.9 | 0.5 | 1.53 | 10 | 000000000 | 0000 |
M4 | 0.7 | 7.4 mm | 2.32 | 7.9 | 0.6 | 2.3 | 10 | 000000000 | 0000 |
M5 | 0.8 | 7.9 mm | 1.53 | 8.7 | 0.5 | 1.53 | 10 | 000000000 | 0000 |
M5 | 0.8 | 7.9 mm | 2.32 | 8.7 | 0.6 | 2.3 | 10 | 000000000 | 0000 |
M6 | 1 | 8.7 mm | 3.18 | 9.5 | 0.8 | 3.05 | 10 | 000000000 | 00000 |
M6 | 1 | 8.7 mm | 3.96 | 9.5 | 1 | 3.84 | 10 | 000000000 | 00000 |
Stainless Steel Aligning Press-Fit Nuts for Sheet Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/909/90936a800p1-light-b01-digital@halfx_637048550349410276.png?ver=imagenotfound)
These nuts have good chemical resistance and may be mildly magnetic. They have threads that float within the body so you can install a bolt at a slight angle to align off-center parts. Knurls on the bottom of the nut hold them firmly in place. Press them into a drilled or punched hole with an installation tool or an arbor press. Installation requires access to both sides of the panel.
For technical drawings and 3-D models, click on a part number.
Head | Press-Fit Nuts | |||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Drill Bit Size | For Min. Panel Thick. | OD | Ht. | PEM® Part No. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
4-40 | L | 0.038" | 0.36" | 0.13" | AC-440-1 | 5 | 000000000 | 00000 |
4-40 | L | 0.054" | 0.36" | 0.13" | AC-440-2 | 5 | 000000000 | 0000 |
6-32 | 21/64" | 0.038" | 0.39" | 0.13" | AC-632-1 | 5 | 000000000 | 0000 |
6-32 | 21/64" | 0.054" | 0.39" | 0.13" | AC-632-2 | 5 | 000000000 | 0000 |
8-32 | U | 0.054" | 0.44" | 0.13" | AC-832-2 | 5 | 000000000 | 0000 |
10-24 | 13/32" | 0.054" | 0.47" | 0.17" | AC-024-2 | 1 | 000000000 | 0000 |
10-32 | 13/32" | 0.038" | 0.47" | 0.17" | AC-032-1 | 1 | 000000000 | 0000 |
10-32 | 13/32" | 0.054" | 0.47" | 0.17" | AC-032-2 | 5 | 000000000 | 00000 |
1/4"-20 | 33/64" | 0.054" | 0.6" | 0.21" | AC-0420-2 | 1 | 000000000 | 0000 |
1/4"-28 | 33/64" | 0.054" | 0.6" | 0.21" | AC-0428-2 | 1 | 000000000 | 0000 |
Thread | Head | Press-Fit Nuts | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Drill Bit Size | For Min. Panel Thick., mm | OD, mm | Ht., mm | PEM® Part No. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
M3 | 0.5 | 7.4 mm | 0.97 | 9.14 | 3.31 | AC-M3-1 | 5 | 000000000 | 00000 |
M3 | 0.5 | 7.4 mm | 1.38 | 9.14 | 3.31 | AC-M3-2 | 1 | 000000000 | 0000 |
M4 | 0.7 | 9.4 mm | 0.97 | 11.18 | 3.31 | AC-M4-1 | 1 | 000000000 | 0000 |
M4 | 0.7 | 9.4 mm | 1.38 | 11.18 | 3.31 | AC-M4-2 | 1 | 000000000 | 0000 |
M5 | 0.8 | 10.4 mm | 1.38 | 11.94 | 4.32 | AC-M5-2 | 1 | 000000000 | 0000 |
M6 | 1 | 13.1 mm | 1.38 | 15.24 | 5.34 | AC-M6-2 | 1 | 000000000 | 0000 |
Nylon-Insert Press-Fit Locknuts for Sheet Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/918/91835a550p1-b01-digital@halfx_637048533406211149.png?ver=imagenotfound)
These press-fit nuts have a nylon insert that grips threads to resist loosening and knurls on the bottom of the nut that hold them firmly in place. Press them into a drilled or punched hole with an installation tool or an arbor press. Installation requires access to both sides of the panel.
18-8 stainless steel locknuts are chemical resistant and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Thread Size | Drill Bit Size | For Min. Panel Thick. | Flange Dia. | Head Ht. | Insert Max. Temp., °F | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
2-56 | 1/8" | 0.05" | 0.17" | 0.08" | 250° | 10 | 000000000 | 000000 |
4-40 | 5/32" | 0.05" | 0.2" | 0.09" | 250° | 10 | 000000000 | 00000 |
6-32 | 3/16" | 0.05" | 0.28" | 0.13" | 250° | 10 | 000000000 | 00000 |
8-32 | 7/32" | 0.05" | 0.31" | 0.16" | 250° | 10 | 000000000 | 00000 |
10-32 | 1/4" | 0.05" | 0.34" | 0.18" | 250° | 10 | 000000000 | 00000 |
Stainless Steel Press-Fit Nuts for Soft Metal and Plastic
![](/prerenderstable/mvPRE/contents/gfx/imagecache/946/94648a320p1-b01-digitall@halfx_637066503921088164.png?ver=imagenotfound)
These nuts have good chemical resistance and may be mildly magnetic. Also known as broach style captive nuts, press them into a drilled or punched hole in plastic and soft metal with an arbor press or similar pressure tool. Installation requires access to both sides of the panel. Knurls on the bottom of the nut hold them firmly in place. A tin plating provides corrosion resistance to chemicals and salt water.
For technical drawings and 3-D models, click on a part number.
Press-Fit Nuts | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Head | Installation Tool | |||||||||
Thread Size | Drill Bit Size | For Min. Panel Thick. | OD | Ht. | PEM® Part No. | Pkg. Qty. | Pkg. | Each | ||
18-8 Stainless Steel | ||||||||||
2-56 | No. 26 | 0.06" | 0.22" | 0.07" | KFS2-256 | 25 | 000000000 | 000000 | 000000000 | 0000000 |
4-40 | No. 19 | 0.06" | 0.22" | 0.07" | KFS2-440 | 25 | 000000000 | 00000 | 000000000 | 000000 |
6-32 | No. 3 | 0.06" | 0.28" | 0.07" | KFS2-632 | 25 | 000000000 | 00000 | 000000000 | 000000 |
8-32 | 1/4" | 0.06" | 0.34" | 0.1" | KFS2-832 | 25 | 000000000 | 00000 | 000000000 | 000000 |
10-24 | I | 0.06" | 0.38" | 0.13" | KFS2-024 | 10 | 000000000 | 0000 | 000000000 | 000000 |
10-32 | I | 0.06" | 0.38" | 0.13" | KFS2-032 | 10 | 000000000 | 0000 | 000000000 | 000000 |
1/4"-20 | 21/64" | 0.06" | 0.44" | 0.24" | KFS2-0420 | 10 | 000000000 | 00000 | 000000 | 00 |
Metric Stainless Steel Press-Fit Nuts for Soft Metal and Plastic
![](/prerenderstable/mvPRE/contents/gfx/imagecache/941/94100a140p1-b01-digital@halfx_637060455024016146.png?ver=imagenotfound)
Made from 18-8 stainless steel, these nuts have good chemical resistance and may be mildly magnetic. Also known as broach style captive nuts, press them into a drilled or punched hole in plastic and soft metal with an arbor press or similar pressure tool. Installation requires access to both sides of the panel. Knurls on the bottom of the nut hold them firmly in place.
For technical drawings and 3-D models, click on a part number.
Press-Fit Nuts | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Head | Installation Tool | |||||||||
Size | Pitch, mm | Drill Bit Size | For Min. Panel Thick., mm | OD, mm | Ht., mm | PEM® Part No. | Pkg. Qty. | Pkg. | Each | ||
18-8 Stainless Steel | |||||||||||
M2 | 0.4 | No. 26 | 1.53 | 5.56 | 1.5 | KFS2-M2 | 10 | 000000000 | 00000 | 000000000 | 0000000 |
M2.5 | 0.45 | No. 19 | 1.53 | 5.56 | 1.5 | KFS2-M2.5 | 10 | 000000000 | 0000 | 000000000 | 000000 |
M3 | 0.5 | No. 19 | 1.53 | 5.56 | 1.5 | KFS2-M3 | 20 | 000000000 | 00000 | 000000000 | 000000 |
M4 | 0.7 | 1/4" | 1.53 | 8.74 | 2 | KFS2-M4 | 20 | 000000000 | 00000 | 000000000 | 000000 |
M5 | 0.8 | I | 1.53 | 9.53 | 3 | KFS2-M5 | 20 | 000000000 | 00000 | 000000000 | 000000 |
Stainless Steel Snap-In Nuts
![](/prerenderstable/mvPRE/contents/gfx/imagecache/906/90680a300p1-b01-digitall@halfx_636713273767340000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i14/i149-90680a000-1610394868-p9@halfx_637459700879852100.png?ver=imagenotfound)
These nuts have good chemical resistance and may be mildly magnetic. Snap them into square holes in thin material. Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Mounting legs expand to lock the fastener in place. They can be installed by hand or with pliers.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch | For Panel Thick. | Square Hole Size | Wd. | Head Ht. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
10-24 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 000000 |
10-24 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
10-24 | __ | 0.093" to 0.126" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
10-24 | __ | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
10-32 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
10-32 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.49" | 0.25" | 5 | 000000000 | 0000 |
10-32 | __ | 0.093" to 0.126" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
10-32 | __ | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
1/4"-20 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
1/4"-20 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
1/4"-20 | __ | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
1/4"-20 | __ | 0.125" to 0.156" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
Metric 18-8 Stainless Steel | ||||||||
M5 | 0.8mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M5 | 0.8mm | 1.626mm to 2.667mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M5 | 0.8mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
M5 | 0.8mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M6 | 1mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M6 | 1mm | 1.626mm to 2.667mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M6 | 1mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M6 | 1mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |