How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Yor-Lok Fittings for Stainless Steel Tubing

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.
316 stainless steel fittings have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.


- For Use With: Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Natural Gas, Steam, Water
- Tubing: Use with welded or seamless 304/304L or 316/316L stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting. Caps for fittings replace the nut and sleeve of an existing fitting.
For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Temp. Range, °F | Each | |
For Tubing | ||||||
1/16" | 0.02" | 316 Stainless Steel | 9,000 psi @ 72° F | -420° to 1200° | 00000000 | 000000 |
1/8" | 0.035" | 316 Stainless Steel | 6,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
5/16" | 0.035" | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3mm | 0.5mm | 316 Stainless Steel | 9,700 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
4mm | 1mm | 316 Stainless Steel | 3,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
6mm | 1mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
8mm | 1mm | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
10mm | 0.5mm | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
12mm | 0.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
14mm | 1 to 2 mm | 316 Stainless Steel | 2,300 psi @ 72° F | -420° to 1200° | 0000000 | 00000 |
For Fitting | ||||||
1/16" | 0.02" | 316 Stainless Steel | 9,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/8" | 0.035" | 316 Stainless Steel | 6,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3mm | 0.5mm | 316 Stainless Steel | 9,700 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
4mm | 1mm | 316 Stainless Steel | 3,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
6mm | 1mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
8mm | 1mm | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
10mm | 0.5mm | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
12mm | 0.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |

For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | Temp. Range, °F | Each | |
1/16" | 0.02" | 316 Stainless Steel | 9,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/8" | 0.035" | 316 Stainless Steel | 6,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
3/8" | 0.035" | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3mm | 0.5mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
4mm | 1mm | 316 Stainless Steel | 3,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
6mm | 1mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
8mm | 1mm | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
10mm | 0.5mm | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
12mm | 0.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
14mm | 1.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |

For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Max. Pressure | Temp. Range, °F | Each | |
1/16" | 0.02" | 316 Stainless Steel | 9,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/8" | 0.035" | 316 Stainless Steel | 6,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
3/8" | 0.035" | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
5/8" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
3/4" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
1" | 0.065" | 316 Stainless Steel | 1,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3mm | 0.5mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
4mm | 1mm | 316 Stainless Steel | 3,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
6mm | 1mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
8mm | 1mm | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
10mm | 0.5mm | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
12mm | 0.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
14mm | 1.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |

PTFE sleeves are plastic instead of stainless steel, so they won’t damage tubing.
For Tube OD | Sleeve Material | Max. Pressure | Temp. Range, °F | Each | |
1/16" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 000000 |
1/8" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
3/16" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |
1/4" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
5/16" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
3/8" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
1/2" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
5/8" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |
3/4" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |
1" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |

Tube supports are recommended for soft plastic tubing to prevent the tube from collapsing.
For Tube | |||||
---|---|---|---|---|---|
OD | ID | Tube Support Material | Temp. Range, °F | Each | |
3/16" | 1/8" | 316 Stainless Steel | -420° to 1200° | 00000000 | 00000 |
1/4" | 1/8" | 316 Stainless Steel | -420° to 1200° | 00000000 | 0000 |
5/16" | 1/4" | 316 Stainless Steel | -420° to 1200° | 00000000 | 0000 |
3/8" | 1/4" | 316 Stainless Steel | -420° to 1200° | 00000000 | 0000 |
1/2" | 1/4" | 316 Stainless Steel | -420° to 1200° | 00000000 | 0000 |
5/8" | 3/8" | 316 Stainless Steel | -420° to 1200° | 00000000 | 00000 |
3/4" | 1/2" | 316 Stainless Steel | -420° to 1200° | 00000000 | 00000 |
1" | 3/4" | 316 Stainless Steel | -420° to 1200° | 00000000 | 00000 |
Precision AN 37° Flared Fittings for Stainless Steel Tubing

- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 1200° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings. They are made to exact AS (formerly AN) specifications and provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.

304 Stainless Steel | 316 Stainless Steel | |||||
---|---|---|---|---|---|---|
For Tube OD | Max. Pressure | Specifications Met | Each | Each | ||
1/8" | 3,000 psi @ 72° F | AN929-2J, ASTM A380, SAE AS4841 | 0000000 | 000000 | 000000 | 00 |
1/8" | 3,000 psi @ 72° F | AN929-2K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 000000 |
1/4" | 3,000 psi @ 72° F | AN929-4J, ASTM A380, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
1/4" | 3,000 psi @ 72° F | AN929-4K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
3/8" | 3,000 psi @ 72° F | AN929-6J, ASTM A380, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
3/8" | 3,000 psi @ 72° F | AN929-6K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
1/2" | 3,000 psi @ 72° F | AN929-8J, ASTM A380, SAE AS4841 | 0000000 | 00000 | 000000 | 00 |
1/2" | 3,000 psi @ 72° F | AN929-8K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
3/4" | 3,000 psi @ 72° F | AN929-12J, ASTM A380, SAE AS4841 | 0000000 | 00000 | 000000 | 00 |
3/4" | 3,000 psi @ 72° F | AN929-12K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
1" | 3,000 psi @ 72° F | AN929-16J, ASTM A380, SAE AS4841 | 00000000 | 00000 | 000000 | 00 |
1" | 3,000 psi @ 72° F | AN929-16K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |

304 Stainless Steel | 316 Stainless Steel | |||||
---|---|---|---|---|---|---|
For Tube OD | Max. Pressure | Specifications Met | Each | Each | ||
1/8" | 3,000 psi @ 72° F | AN806-J2, ASTM A380, SAE AS4841 | 0000000 | 000000 | 000000 | 00 |
1/8" | 3,000 psi @ 72° F | AN806-K2, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 000000 |
1/4" | 3,000 psi @ 72° F | AN806-J4, ASTM A380, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
1/4" | 3,000 psi @ 72° F | AN806-K4, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
3/8" | 3,000 psi @ 72° F | AN806-J6, ASTM A380, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
3/8" | 3,000 psi @ 72° F | AN806-K6, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
1/2" | 3,000 psi @ 72° F | AN806-J8, ASTM A380, SAE AS4841 | 0000000 | 00000 | 000000 | 00 |
1/2" | 3,000 psi @ 72° F | AN806-K8, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
3/4" | 3,000 psi @ 72° F | AN806-J12, ASTM A380, SAE AS4841 | 0000000 | 00000 | 000000 | 00 |
3/4" | 3,000 psi @ 72° F | AN806-K12, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
1" | 3,000 psi @ 72° F | AN806-J16, ASTM A380, SAE AS4841 | 00000000 | 00000 | 000000 | 00 |
1" | 3,000 psi @ 72° F | AN806-K16, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |

304 Stainless Steel | 316 Stainless Steel | |||||
---|---|---|---|---|---|---|
For Tube OD | Max. Pressure | Specifications Met | Each | Each | ||
1/8" | 3,000 psi @ 72° F | AN818-2J, ASTM A380, SAE AS4841 | 0000000 | 00000 | 000000 | 00 |
1/8" | 3,000 psi @ 72° F | AN818-2K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
1/4" | 3,000 psi @ 72° F | AN818-4J, ASTM A380, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
1/4" | 3,000 psi @ 72° F | AN818-4K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
3/8" | 3,000 psi @ 72° F | AN818-6J, ASTM A380, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
3/8" | 3,000 psi @ 72° F | AN818-6K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
1/2" | 3,000 psi @ 72° F | AN818-8J, ASTM A380, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
1/2" | 3,000 psi @ 72° F | AN818-8K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
3/4" | 3,000 psi @ 72° F | AN818-12J, ASTM A380, SAE AS4841 | 0000000 | 00000 | 000000 | 00 |
3/4" | 3,000 psi @ 72° F | AN818-12K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
1" | 3,000 psi @ 72° F | AN818-16J, ASTM A380, SAE AS4841 | 00000000 | 00000 | 000000 | 00 |
1" | 3,000 psi @ 72° F | AN818-16K, ASTM A380, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |

304 Stainless Steel | 316 Stainless Steel | |||||
---|---|---|---|---|---|---|
For Tube OD | Max. Pressure | Specifications Met | Each | Each | ||
1/8" | 3,000 psi @ 72° F | AN818-2J, ASTM A380, MS20819, SAE AS4841 | 0000000 | 00000 | 000000 | 00 |
1/8" | 3,000 psi @ 72° F | AN819-2K, ASTM A380, MS20819, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
1/4" | 3,000 psi @ 72° F | AN819-4J, ASTM A380, MS20819, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
1/4" | 3,000 psi @ 72° F | AN819-4K, ASTM A380, MS20819, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
3/8" | 3,000 psi @ 72° F | AN819-6J, ASTM A380, MS20819, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
3/8" | 3,000 psi @ 72° F | AN819-6K, ASTM A380, MS20819, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
1/2" | 3,000 psi @ 72° F | AN819-8J, ASTM A380, MS20819, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
1/2" | 3,000 psi @ 72° F | AN819-8K, ASTM A380, MS20819, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
3/4" | 3,000 psi @ 72° F | AN819-12J, ASTM A380, MS20819, SAE AS4841 | 0000000 | 0000 | 000000 | 00 |
3/4" | 3,000 psi @ 72° F | AN819-12K, ASTM A380, MS20819, SAE AS4841 | 000000 | 00 | 00000000 | 0000 |
1" | 3,000 psi @ 72° F | AN819-16J, ASTM A380, MS20819, SAE AS4841 | 00000000 | 00000 | 000000 | 00 |
1" | 3,000 psi @ 72° F | AN819-16K, ASTM A380, MS20819, SAE AS4841 | 000000 | 00 | 00000000 | 00000 |
Vibration-Resistant Precision AN 37° Flared Fittings for Stainless Steel Tubing

- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 500° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications. The threads on the tube end are Class 3A and adhere to tighter tolerances than other 37° flared fittings. They are made to exact AS (formerly AN) specifications and provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings are 316 stainless steel for excellent corrosion resistance. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.


For Tube OD | Material | Max. Pressure | Specifications Met | Each | |
1/4" | 316 Stainless Steel | 3,000 psi @ 72° F | ASTM A380, SAE AS9100D, SAE AS9104/1 | 00000000 | 000000 |
3/8" | 316 Stainless Steel | 3,000 psi @ 72° F | ASTM A380, SAE AS9100D, SAE AS9104/1 | 00000000 | 00000 |
1/2" | 316 Stainless Steel | 3,000 psi @ 72° F | ASTM A380, SAE AS9100D, SAE AS9104/1 | 00000000 | 00000 |
3/4" | 316 Stainless Steel | 3,000 psi @ 72° F | ASTM A380, SAE AS9100D, SAE AS9104/1 | 00000000 | 00000 |

For Tube OD | Nut Material | Max. Pressure | Specifications Met | Each | |
1/4" | 316 Stainless Steel | 3,000 psi @ 72° F | AN818-4K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
3/8" | 316 Stainless Steel | 3,000 psi @ 72° F | AN818-6K, ASTM A380, SAE AS4841 | 00000000 | 0000 |
1/2" | 316 Stainless Steel | 3,000 psi @ 72° F | AN818-8K, ASTM A380, SAE AS4841 | 00000000 | 0000 |
3/4" | 316 Stainless Steel | 3,000 psi @ 72° F | AN818-12K, ASTM A380, SAE AS4841 | 00000000 | 00000 |

For Tube OD | Sleeve Material | Max. Pressure | Specifications Met | Each | |
1/4" | 316 Stainless Steel | 3,000 psi @ 72° F | AN819-4K, ASTM A380, MS20819, SAE AS4841 | 00000000 | 00000 |
3/8" | 316 Stainless Steel | 3,000 psi @ 72° F | AN819-6K, ASTM A380, MS20819, SAE AS4841 | 00000000 | 0000 |
1/2" | 316 Stainless Steel | 3,000 psi @ 72° F | AN819-8K, ASTM A380, MS20819, SAE AS4841 | 00000000 | 0000 |
3/4" | 316 Stainless Steel | 3,000 psi @ 72° F | AN819-12K, ASTM A380, MS20819, SAE AS4841 | 00000000 | 0000 |
37° Flared Fittings for Stainless Steel Tubing

- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514, except fittings with BSPP and BSPT threads meet SAE J514 only
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They are 316 stainless steel for excellent corrosion resistance. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
For Tube OD | Material | Each | |
1/8" | 316 Stainless Steel | 000000000 | 000000 |
1/4" | 316 Stainless Steel | 000000000 | 00000 |
5/16" | 316 Stainless Steel | 000000000 | 00000 |
3/8" | 316 Stainless Steel | 000000000 | 00000 |
1/2" | 316 Stainless Steel | 000000000 | 00000 |
5/8" | 316 Stainless Steel | 000000000 | 00000 |
3/4" | 316 Stainless Steel | 000000000 | 00000 |
1" | 316 Stainless Steel | 000000000 | 00000 |

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
For Tube OD | Material | Each | |
1/8" | 316 Stainless Steel | 000000000 | 000000 |
1/4" | 316 Stainless Steel | 000000000 | 0000 |
5/16" | 316 Stainless Steel | 000000000 | 00000 |
3/8" | 316 Stainless Steel | 000000000 | 00000 |
1/2" | 316 Stainless Steel | 000000000 | 00000 |
5/8" | 316 Stainless Steel | 000000000 | 00000 |
3/4" | 316 Stainless Steel | 000000000 | 00000 |
1" | 316 Stainless Steel | 000000000 | 00000 |

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
For Tube OD | Nut Material | Each | |
1/8" | 316 Stainless Steel | 000000000 | 00000 |
1/4" | 316 Stainless Steel | 000000000 | 0000 |
5/16" | 316 Stainless Steel | 000000000 | 0000 |
3/8" | 316 Stainless Steel | 000000000 | 0000 |
1/2" | 316 Stainless Steel | 000000000 | 0000 |
5/8" | 316 Stainless Steel | 000000000 | 00000 |
3/4" | 316 Stainless Steel | 000000000 | 00000 |
1" | 316 Stainless Steel | 000000000 | 00000 |

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
For Tube OD | ||||
---|---|---|---|---|
Inch | Metric, mm | Sleeve Material | Each | |
Inch | ||||
1/8" | __ | 316 Stainless Steel | 000000000 | 00000 |
1/4" | __ | 316 Stainless Steel | 000000000 | 0000 |
5/16" | __ | 316 Stainless Steel | 000000000 | 0000 |
3/8" | __ | 316 Stainless Steel | 000000000 | 0000 |
1/2" | __ | 316 Stainless Steel | 000000000 | 0000 |
5/8" | __ | 316 Stainless Steel | 000000000 | 0000 |
3/4" | __ | 316 Stainless Steel | 000000000 | 00000 |
1" | __ | 316 Stainless Steel | 000000000 | 00000 |
Inch × Metric | ||||
1/4" | 6 | 316 Stainless Steel | 000000000 | 00000 |
5/16" | 8 | 316 Stainless Steel | 000000000 | 00000 |
3/8" | 10 | 316 Stainless Steel | 000000000 | 00000 |
1/2" | 12 | 316 Stainless Steel | 000000000 | 00000 |
Precision Compression Fittings for Stainless Steel Tubing

- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -420° to 1200° F
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Compatible With: Parker CPI
Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. Also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are 316 stainless steel for excellent corrosion resistance. A molybdenum disulfide coating on the nut acts as a lubricant for easy installation.
For technical drawings and 3-D models, click on a part number.


Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting. Caps for fittings replace the nut and sleeve of an existing fitting.
For Tube | For Tubing | For Fitting | |||||
---|---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Each | Each | ||
1/16" | 0.02" | 316 Stainless Steel | 7,500 psi @ 72° F | 00000000 | 000000 | 00000000 | 000000 |
1/8" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 00000 | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
1/2" | 0.035" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |

For Tube | |||||
---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | Each | |
1/16" | 0.02" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 7,500 psi @ 72° F | 00000000 | 00000 |
3/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 0000 |
1/4" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 0000 |
5/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 | 0000 |
3/8" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 0000 |
1/2" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 0000 |
5/8" | 0.049" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 |
3/4" | 0.049" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 |

For Tube | |||||
---|---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Max. Pressure | Each | |
1/16" | 0.02" | 316 Stainless Steel | 7,500 psi @ 72° F | 00000000 | 00000 |
1/8" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 0000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 0000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 | 0000 |
3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 0000 |
1/2" | 0.035" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 0000 |
5/8" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 0000 |
3/4" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 |
Compression Fittings for Stainless Steel Tubing

- For Use With:
303 Stainless Steel, 316 Stainless Steel with 17-4 PH Stainless Steel Sleeve, and 360 Brass: Air, Water, Hydraulic Fluid
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water - Temperature Range: See table
- Tubing:
303 Stainless Steel and 360 Brass: Use with welded or seamless 304 or 316 stainless steel
316 Stainless Steel: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A269 - Specifications Met:
316 Stainless Steel: ISO 8434, DIN 2353
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: SAE J514
A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless fittings or bite fittings.
316 stainless steel fittings have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.

For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Temp. Range, °F | Each | |
1/8" | 0.028" | 316 Stainless Steel | 4,300 psi @ 72° F | -420° to 1200° | 000000000 | 000000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
1/2" | 0.049" | 316 Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
5/8" | 0.058" | 316 Stainless Steel | 2,300 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
3/4" | 0.065" | 316 Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 000000 |

For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | Temp. Range, °F | Each | |
1/8" | 0.028" | 316 Stainless Steel | 4,300 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 000000000 | 0000 |
3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | -420° to 1200° | 000000000 | 0000 |
1/2" | 0.049" | 316 Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 0000 |
5/8" | 0.058" | 316 Stainless Steel | 2,300 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
3/4" | 0.065" | 316 Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |

For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Max. Pressure | Temp. Range, °F | Each | |
1/8" | 0.028" | 17-4 PH Stainless Steel | 4,300 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
1/4" | 0.035" | 17-4 PH Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 000000000 | 0000 |
3/8" | 0.035" | 17-4 PH Stainless Steel | 2,600 psi @ 72° F | -420° to 1200° | 000000000 | 0000 |
1/2" | 0.049" | 17-4 PH Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 0000 |
5/8" | 0.058" | 17-4 PH Stainless Steel | 2,300 psi @ 72° F | -420° to 1200° | 000000000 | 0000 |
3/4" | 0.065" | 17-4 PH Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |
1" | 0.065" | 17-4 PH Stainless Steel | 1,900 psi @ 72° F | -420° to 1200° | 000000000 | 00000 |