To prevent accidental opening, these latches have a safety catch.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

To prevent accidental opening, these latches have a safety catch.

Mount these latches on a corner to draw perpendicular surfaces together.

No need for a strike plate, these latches hook into a lip or notch.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

To prevent accidental opening, these latches have a safety catch.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

No need for a strike plate, these latches hook into a lip or notch.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

Bolts are spring-loaded to stay latched until you activate the pull.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

To ensure the correct fit on your drawer, these locks include two latch bolts.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.

To prevent doors from slamming, these latches are hydraulic.

When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.

To open, push in the knob and pull the tab.

An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.

Turn the padlock eye to fasten these hasps without a padlock.

Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.

Mount these padlockable eyes on the inside edge of a door and door frame.

Choose these hasps if you need hasps that each open with a different key.

Choose these locks if you need several that open with the same key.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.

For frequently used doors, these knobs last twice as long as standard door knobs.

In addition to lasting twice as long as standard key-locking door handles, these mortise mount into a cutout in the door to withstand vandalism.

For frequently used doors, these knobs last twice as long as standard key-locking door knobs.

In addition to lasting twice as long as standard self-locking door handles, these mortise mount into a cutout in the door to withstand vandalism.

For frequently used doors, these knobs last twice as long as standard self-locking door knobs.

For frequently used doors, these knobs last twice as long as standard key- and button-locking door knobs.

For frequently used doors, these knobs last twice as long as standard button-locking door knobs.

Crossbars open doors with a push and are often used on emergency exits.

A slight push or pull on the lever opens your door.

These versatile strike plates are for use with door handles and knobs, pry-resistant door handles and knobs, and pry-resistant crossbars.

In addition to sliding gates, these locks are for use on cantilever and fixed-roller gates.

Hold bathroom doors closed by swinging these latches into a notch in the strike plate.

Shackle is concealed to make it difficult to cut.

For added security, locks have specially designed keys that cannot be duplicated and cannot be removed when the lock is open.

Vertical shackle clearance is greater than 1". These corrosion-resistant padlocks are well suited for refineries and marine applications. Set your own combination and change it at any time.

Vertical shackle clearance is greater than 1”.

Vertical shackle clearance is greater than 1". Open the shackle with a control key as well as the combination.

Push the lever to lock the handle and prevent accidental opening.

Push the lever to lock the handle and prevent accidental opening.

Mount these clamps below a surface.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

The ring allows you to attach these spring plungers to a lanyard.

Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.

Thread onto machinery or attach a knob or handle to the threaded spindle.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A smooth ball handle is easy to grip and won't catch on other parts.

Add a knob or handle to the threaded shank.