Stainless Steel Metric Key Stock Bars

Filter by

System of Measurement

Material

316/316L Stainless Steel

Width

Height

Length

Key Type

Tolerance Rating

Minimum Hardness

Specifications Met

Hardness

RoHS

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Number of Pieces

Container Type

Container Features

180 Products

Machine Key Stock

Cut this square or rectangular key stock to length to create a straight machine key. Straight keys are the most common type of key. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.

18-8 Stainless Steel

18-8 stainless steel key stock offers a balance of strength and corrosion resistance. It may be mildly magnetic. 18-8 stainless steel key stock is more corrosion resistant than steel key stock.

Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.

Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.

DIN 6880—Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.

			Tolerance, mm
	Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Min. Hardness	Specs. Met		Each
305 mm Long



		3 mm × 3 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	—	98810A169	000000


		3 mm × 3 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6880	90457A410	0000
		4 mm × 4 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A100	0000
		4 mm × 4 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6880	90457A420	0000
		5 mm × 5 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A110	0000
		5 mm × 5 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6880	90457A430	0000
		6 mm × 6 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A120	00000
		6 mm × 6 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6880	90457A440	00000
		7 mm × 7 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A130	00000
		7 mm × 7 mm	Undersized	-0.090 to 0.000	-0.090 to 0.000	Rockwell B82	DIN 178	98810A812	00000
		7 mm × 8 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 174	98810A140	00000


		8 mm × 8 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A150	00000
		8 mm × 8 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Not Rated	DIN 6880	90457A460	00000
		8 mm × 10 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 174	98810A152	00000
		8 mm × 12 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A155	00000
		9 mm × 14 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 174	98810A160	00000
		10 mm × 10 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A170	00000
		10 mm × 10 mm	Undersized	-0.090 to 0.000	-0.090 to 0.000	Rockwell B82	DIN 178	98810A332	00000
		12 mm × 12 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A180	00000
		14 mm × 14 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A200	00000
		16 mm × 16 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A210	00000


		18 mm × 18 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A220	00000
		20 mm × 20 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A230	000000
		22 mm × 22 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A240	000000
		24 mm × 24 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Rockwell B82	DIN 178	98810A250	000000

304 Stainless Steel

304 stainless steel key stock offers a good balance of strength, corrosion resistance, and machinability. 304 stainless steel key stock is more corrosion resistant than steel key stock.

DIN 6880—Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.

			Tolerance, mm
	Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Min. Hardness	Specs. Met		Each
305 mm Long



		2 mm × 2 mm	Undersized	-0.025 to 0.000	-0.025 to 0.000	Rockwell B80	DIN 6880	92288A601	000000


		4 mm × 6 mm	Undersized	-0.075 to 0.000	-0.030 to 0.000	Rockwell B80	DIN 6880	92288A602	00000
		6 mm × 10 mm	Undersized	-0.030 to 0.000	-0.036 to 0.000	Rockwell B80	DIN 6880	92288A603	00000
		7 mm × 8 mm	Undersized	-0.090 to 0.000	-0.036 to 0.000	Rockwell B80	DIN 6880	92288A604	00000
		8 mm × 10 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B80	DIN 6880	92288A605	00000
		8 mm × 12 mm	Undersized	-0.036 to 0.000	-0.043 to 0.000	Rockwell B80	DIN 6880	92288A606	00000
		9 mm × 14 mm	Undersized	-0.090 to 0.000	-0.043 to 0.000	Rockwell B80	DIN 6880	92288A607	00000


		1,000 mm Long



				2 mm × 2 mm	Undersized	-0.025 to 0.000	-0.025 to 0.000	Rockwell B80	DIN 6880	92288A608	00000


				3 mm × 5 mm	Undersized	-0.060 to 0.000	-0.030 to 0.000	Rockwell B80	DIN 6880	92288A614	00000
				4 mm × 4 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B80	DIN 6880	92288A615	00000
				4 mm × 6 mm	Undersized	-0.075 to 0.000	-0.030 to 0.000	Rockwell B80	DIN 6880	92288A609	00000
				5 mm × 5 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B80	DIN 6880	92288A616	00000
				6 mm × 6 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B80	DIN 6880	92288A617	00000
				7 mm × 8 mm	Undersized	-0.090 to 0.000	-0.036 to 0.000	Rockwell B80	DIN 6880	92288A610	00000
				8 mm × 8 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B80	DIN 6880	92288A618	00000
				8 mm × 10 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B80	DIN 6880	92288A611	00000
				8 mm × 12 mm	Undersized	-0.036 to 0.000	-0.043 to 0.000	Rockwell B80	DIN 6880	92288A612	00000
				9 mm × 14 mm	Undersized	-0.090 to 0.000	-0.043 to 0.000	Rockwell B80	DIN 6880	92288A613	000000

316 Stainless Steel

316 stainless steel key stock has the best corrosion resistance of our stainless steel key stock and may be mildly magnetic. 316 stainless steel key stock is more corrosion resistant than steel key stock.

DIN 6880—Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.

			Tolerance, mm
	Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Min. Hardness	Specs. Met		Each
305 mm Long



		4 mm × 6 mm	Undersized	-0.075 to 0.000	-0.030 to 0.000	Rockwell B85	DIN 6880	92288A621	000000


		14 mm × 25 mm	Undersized	-0.110 to 0.000	-0.052 to 0.000	Rockwell B85	DIN 6880	92288A622	000000
		16 mm × 28 mm	Undersized	-0.110 to 0.000	-0.052 to 0.000	Rockwell B85	DIN 6880	92288A623	000000
		18 mm × 32 mm	Undersized	-0.110 to 0.000	-0.062 to 0.000	Rockwell B85	DIN 6880	92288A624	000000


		1,000 mm Long



				3 mm × 3 mm	Undersized	-0.025 to 0.000	-0.025 to 0.000	Rockwell B85	DIN 6880	92288A628	00000


				3 mm × 5 mm	Undersized	-0.060 to 0.000	-0.030 to 0.000	Rockwell B85	DIN 6880	92288A637	00000
				4 mm × 4 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B85	DIN 6880	92288A638	00000
				5 mm × 5 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B85	DIN 6880	92288A639	00000
				6 mm × 6 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B85	DIN 6880	92288A640	00000
				7 mm × 7 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B85	DIN 6880	92288A641	00000
				7 mm × 8 mm	Undersized	-0.090 to 0.000	-0.036 to 0.000	Rockwell B85	DIN 6880	92288A642	00000
				8 mm × 8 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B85	DIN 6880	92288A643	00000
				8 mm × 10 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B85	DIN 6880	92288A644	00000
				8 mm × 12 mm	Undersized	-0.036 to 0.000	-0.043 to 0.000	Rockwell B85	DIN 6880	92288A645	00000
				9 mm × 14 mm	Undersized	-0.090 to 0.000	-0.043 to 0.000	Rockwell B85	DIN 6880	92288A646	000000


				10 mm × 10 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B85	DIN 6880	92288A647	00000
				10 mm × 12 mm	Undersized	-0.036 to 0.000	-0.043 to 0.000	Rockwell B85	DIN 6880	92288A648	000000
				10 mm × 16 mm	Undersized	-0.090 to 0.000	-0.043 to 0.000	Rockwell B85	DIN 6880	92288A649	000000
				11 mm × 18 mm	Undersized	-0.110 to 0.000	-0.043 to 0.000	Rockwell B85	DIN 6880	92288A650	000000
				12 mm × 12 mm	Undersized	-0.043 to 0.000	-0.043 to 0.000	Rockwell B85	DIN 6880	92288A651	000000
				14 mm × 14 mm	Undersized	-0.043 to 0.000	-0.043 to 0.000	Rockwell B85	DIN 6880	92288A653	000000
				14 mm × 22 mm	Undersized	-0.110 to 0.000	-0.052 to 0.000	Rockwell B85	DIN 6880	92288A654	000000
				14 mm × 25 mm	Undersized	-0.110 to 0.000	-0.052 to 0.000	Rockwell B85	DIN 6880	92288A630	000000
				16 mm × 28 mm	Undersized	-0.110 to 0.000	-0.052 to 0.000	Rockwell B85	DIN 6880	92288A631	000000

316/316L Stainless Steel

316/316L stainless steel key stock has the best corrosion resistance of our stainless steel key stock and may be mildly magnetic. 316/316L stainless steel key stock is more corrosion resistant than steel key stock.

DIN 6880—Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.

			Tolerance, mm
	Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Min. Hardness	Specs. Met		Each
305 mm Long



		2 mm × 2 mm	Undersized	-0.025 to 0.000	-0.025 to 0.000	Rockwell B86	DIN 6880	90457A100	00000


		3 mm × 3 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Not Rated	—	92288A130	0000
		3 mm × 3 mm	Undersized	-0.025 to 0.000	-0.025 to 0.000	Rockwell B86	DIN 6880	90457A110	0000
		4 mm × 4 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Not Rated	—	92288A159	00000
		4 mm × 4 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B86	DIN 6880	90457A120	0000
		5 mm × 5 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B86	DIN 6880	90457A130	0000
		6 mm × 6 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Not Rated	—	92288A172	00000
		6 mm × 6 mm	Undersized	-0.030 to 0.000	-0.030 to 0.000	Rockwell B86	DIN 6880	90457A140	0000
		7 mm × 7 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Not Rated	—	92288A225	00000
		7 mm × 7 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B86	DIN 6880	90457A150	00000
		7 mm × 8 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Not Rated	—	92288A183	00000


		7 mm × 8 mm	Undersized	-0.090 to 0.000	-0.036 to 0.000	Rockwell B86	DIN 6880	90457A155	00000
		8 mm × 8 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B86	DIN 6880	90457A160	00000
		8 mm × 10 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B86	DIN 6880	90457A164	00000
		8 mm × 12 mm	Undersized	-0.036 to 0.000	-0.043 to 0.000	Rockwell B86	DIN 6880	90457A165	00000
		9 mm × 14 mm	Undersized	-0.090 to 0.000	-0.036 to 0.000	Rockwell B86	DIN 6880	90457A166	00000
		10 mm × 10 mm	Oversized	0.000 to 0.076	0.000 to 0.076	Not Rated	—	92288A119	00000
		10 mm × 10 mm	Undersized	-0.036 to 0.000	-0.036 to 0.000	Rockwell B86	DIN 6880	90457A170	00000
		10 mm × 12 mm	Undersized	-0.036 to 0.000	-0.043 to 0.000	Rockwell B86	DIN 6880	90457A175	00000
		10 mm × 16 mm	Undersized	-0.090 to 0.000	-0.043 to 0.000	Rockwell B86	DIN 6880	90457A176	00000
		11 mm × 18 mm	Undersized	-0.090 to 0.000	-0.043 to 0.000	Rockwell B86	DIN 6880	90457A177	00000


		12 mm × 12 mm	Undersized	-0.043 to 0.000	-0.043 to 0.000	Rockwell B86	DIN 6880	90457A180	00000
		12 mm × 20 mm	Undersized	-0.110 to 0.000	-0.052 to 0.000	Rockwell B86	DIN 6880	90457A185	00000
		14 mm × 14 mm	Undersized	-0.043 to 0.000	-0.043 to 0.000	Rockwell B86	DIN 6880	90457A190	00000
		14 mm × 22 mm	Undersized	-0.110 to 0.000	-0.052 to 0.000	Rockwell B86	DIN 6880	90457A195	00000
		16 mm × 16 mm	Undersized	-0.043 to 0.000	-0.043 to 0.000	Rockwell B86	DIN 6880	90457A200	00000

Machine Keys

Straight keys, with a square or rectangular cross section, are the most common type of key. Install them in keyways to transmit torque from shafts to gears and other components. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.

Undersized Tolerance—Slightly smaller than the size listed in the table, undersized keys are the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use them when parts need to be taken apart frequently, such as for maintenance or prototyping.

			Tolerance, mm
	Lg., mm	Tolerance Rating	Ht.	Wd.	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
316 Stainless Steel







				3 mm × 3 mm

				8	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A103	00000


				10	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A105	0000
				12	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A106	0000
				14	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A107	0000
				15	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A112	0000
				18	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A114	0000
				20	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A119	0000
				22	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A124	0000
				25	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A125	0000
				30	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A132	0000
				40	Undersized	-0.025 to 0.000	-0.025 to 0.000	Not Rated	DIN 6885	5	98870A143	00000




						4 mm × 4 mm

						12	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A159	0000


						14	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A163	0000
						15	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A164	0000
						20	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A172	0000
						25	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A175	0000
						28	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A177	0000
						30	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A181	0000
						32	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A185	0000
						35	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A202	0000
						40	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A207	00000
						50	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A210	00000




								5 mm × 5 mm

								8	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A213	0000


								10	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A217	0000
								12	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A220	0000
								15	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A228	0000
								16	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A237	0000
								18	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A244	0000
								20	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A246	0000
								25	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A250	00000
								30	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A262	00000
								35	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A273	00000
								40	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A278	00000


								50	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A295	00000
								55	Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A297	00000
70								Undersized	-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	1	98870A313	0000




		6 mm × 6 mm

		10	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A316	0000


		15	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A328	0000
		20	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A339	00000
		25	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A356	00000
		30	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A359	00000
		32	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A368	00000
		35	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A372	00000
		40	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	5	98870A393	00000
		45	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	1	98870A396	0000
		56	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	1	98870A401	0000
		60	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	1	98870A411	0000


		65	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	1	98870A429	0000
		70	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	1	98870A436	0000
		75	Undersized					-0.030 to 0.000	-0.030 to 0.000	Not Rated	DIN 6885	1	98870A441	0000
		80	Undersized	-0.030 to 0.000				-0.030 to 0.000	Not Rated	DIN 6885	1	98870A463	0000
		90	Undersized	-0.030 to 0.000	-0.030 to 0.000			Not Rated	DIN 6885	1	98870A466	0000
		100	Undersized	-0.030 to 0.000	-0.030 to 0.000			Not Rated	DIN 6885	1	98870A472	0000
		120	Undersized	-0.030 to 0.000	-0.030 to 0.000			Not Rated	DIN 6885	1	98870A477	0000




				7 mm × 8 mm

				18	Undersized			-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	5	98870A498	00000


				20	Undersized			-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	5	98870A499	00000
				25	Undersized			-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	5	98870A509	00000
				28	Undersized			-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A510	0000
				30	Undersized			-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A511	0000
				35	Undersized			-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A523	0000
				36	Undersized			-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A526	0000
				40	Undersized			-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A530	0000
				65	Undersized	-0.090 to 0.000		-0.036 to 0.000	Not Rated	DIN 6885	1	98870A556	0000
				80	Undersized	-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A564	0000
				90	Undersized	-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A566	0000


				100	Undersized	-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A571	00000
				125	Undersized	-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A584	00000
				150	Undersized	-0.090 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A598	00000




						8 mm × 10 mm

						45	Undersized	-0.036 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A630	0000


						50	Undersized	-0.036 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A634	0000
						55	Undersized	-0.036 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A635	0000
						56	Undersized	-0.036 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A636	0000
						70	Undersized	-0.036 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A648	00000
						90	Undersized	-0.036 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A660	00000
125						Undersized	-0.036 to 0.000	-0.036 to 0.000	Not Rated	DIN 6885	1	98870A672	00000




						8 mm × 12 mm

						20	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A674	0000


						22	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A678	0000
						36	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A740	0000
						50	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A850	0000
						70	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A898	00000
						80	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A907	00000
						110	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A934	00000
						130	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A946	00000
						140	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A947	00000
						150	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A948	00000
						200	Undersized	-0.036 to 0.000	-0.043 to 0.000	Not Rated	DIN 6885	1	98870A955	00000

Oversized Key Stock Assortments

Make a key that is the exact length you need. Because this key stock is slightly larger than standard key stock, keys will fit tightly in worn keyways.

18-8 Stainless Steel—18-8 stainless steel key stock is chemical resistant and may be mildly magnetic.

	Straight Keys Included	Key Size Tolerance, mm	Container Type		Each
18-8 Stainless Steel



	31	4 mm × 4 mm × 305 mm Lg. (5 Pieces) 5 mm × 5 mm × 305 mm Lg. (5 Pieces) 6 mm × 6 mm × 305 mm Lg. (5 Pieces) 7 mm × 7 mm × 305 mm Lg. (5 Pieces) 8 mm × 8 mm × 305 mm Lg. (5 Pieces) 10 mm × 10 mm × 305 mm Lg. (3 Pieces) 12 mm × 12 mm × 305 mm Lg. (3 Pieces)	0 to 0.076	Cardboard Box	90143A150	0000000