About Hinges
More
Cabinet Pivot Hinges
Instead of mounting to the side of a door, mount these hinges to the top and bottom to allow doors to open wide. Use them on doors that cover their frame. Mount the frame leaf to the face of the cabinet frame and the door leaf to the edge of the door. All of these hinges have a nonremovable pin to deter tampering. Capacity is based on one pair of hinges per door. A pair is for one door and includes one top and one bottom hinge.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size  | Pair | |
For Overlay Door—Standard | |||||||||||||||
430 Stainless Steel—Dull | |||||||||||||||
| 13/16" | 29/32" | 2 9/16" | 29/32" | 1 31/32" | 2 9/16" | 0.118" | 270° | 8 | 430 Stainless Steel | Yes | 12 | Countersunk | No. 6 | 00000000 | 000000 |
Wraparound Full-Length Entry Door Hinges
One leaf mounts around the edge of the door for a secure hold, while the other mounts to the frame. Longer than other entry door hinges, this piano-style hinge runs the entire length of doors for strength and durability. Bearings allow the hinge to open and close doors smoothly. A nonremovable pin deters tampering. Capacity is based on a maximum door size of 4' Wd. × 7' Ht. Cut hinge to size with a hacksaw. The hinge is UL Listed for use with labeled fire doors.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | For Door Thick. | Pin Dia. | Pin Material | Specifications Met | Mounting Fasteners Included | Each | |
304 Stainless Steel—Dull | ||||||||||||||
| 83" | 2 1/4" | 83" | 2 1/4" | 4 1/2" | 0.078" | 180° | 600 | 1 3/4" | 3/16" | 304 Stainless Steel | UL Listed, ANSI A156.26 Grade 1 | Yes | 00000000 | 0000000 |
Strut Channel Pivots
Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.
304 stainless steel pivots are more corrosion resistant than galvanized steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pivot Type | (A) | (B) | For Strut Channel Wd. | Range of Motion | Thick. | Hole Dia. | Fasteners Included | Each | |
304 Stainless Steel | |||||||||
| Single Arm | 5 3/8" | 5 3/8" | 1 5/8" | 30°-90° | 1/4" | 9/16" | No | 000000000 | 0000000 |