McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    40 Products

    Corrosion-Resistant Rolling Platform Ladders

    Made of 304 stainless steel, these ladders resist corrosion from wet areas and frequent washdowns better than steel or aluminum ladders. Their steps and platform have serrated surfaces to prevent slipping and allow liquids and debris to pass through. Without work boots, standing on them for extended periods may be uncomfortable. Use the step lock to keep casters from rolling.
    The taller the ladder, the wider the base needs to be to remain compliant with OSHA or Cal/OSHA. Bases are widest at the back. The number of steps listed includes the platform.
    Note: All ladders meet OSHA or Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Unassembled
    Image of Product. Front orientation. Contains Annotated. Ladders. Corrosion-Resistant Rolling Platform Ladders.
    Image of Specification. Front orientation. Contains Border. Serrated Step. Corrosion-Resistant Rolling Platform Ladders.
    Unassembled ladders ship flat, so they are more economical than assembled ladders.
    Ladders
    Replacement Casters (Two
    Swivel and Two Rigid)
    Replacement
    Nonskid Feet/Pads
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Max. Climbing
    Ht.
    Wt. Cap.,
    lb.
    Ground Clearance
    Ht.
    Wheel
    Configuration
    Wt. Actuation
    Type
    Specs. Met
    Each
    Each
    Pkg.
    Qty.
    Pkg.
    304 Stainless Steel
     
    Serrated Steps and Platform
    550"24"14"7 ft.32"46"50"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T11400000000080105T16000000049200N12000000
    65 ft.24"14"94"32"52"5 ft.4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T1150000000080105T1600000049200N1200000
    770"24"14"104"32"58"70"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T1160000000080105T1600000049200N1200000
    880"24"14"114"32"64"80"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T1170000000080105T1600000049200N1200000
    990"24"14"124"32"70"90"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T1180000000080105T1600000049200N1200000
    10100"24"14"134"32"76"100"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T1190000000080105T1600000049200N1200000
    11110"24"14"12 ft.32"82"110"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T1210000000080105T1600000049200N1200000
    1210 ft.24"14"154"32"88"10 ft.4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T1220000000080105T1600000049200N1200000
     
    Assembled
    Image of Product. Front orientation. Contains Annotated. Ladders. Corrosion-Resistant Rolling Platform Ladders.
    Image of Specification. Front orientation. Contains Border. Serrated Step. Corrosion-Resistant Rolling Platform Ladders.
    Assembled ladders have fully welded connections.
    Ladders
    Replacement Casters
    Replacement Wheels
    for Rigid Casters
    Replacement
    Nonskid Feet/Pads
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Max. Climbing
    Ht.
    Wt. Cap.,
    lb.
    Ground Clearance
    Ht.
    Wheel
    Configuration
    Wt. Actuation
    Type
    Specs. Met
    Each
    No. of
    Casters
    Each
    No. of
    Wheels
    Each
    Pkg.
    Qty.
    Pkg.
    304 Stainless Steel
     
    Serrated Steps and Platform
    550"24"10"92"30"40"50"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2380575T650000000001 Swivel80105T63000000180105T62000000179975T88000000
    65 ft.24"10"102"30"46"5 ft.4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2380575T111000000001 Swivel80105T6300000180105T6200000179975T8800000
    770"24"10"112"30"53"70"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2380575T66000000001 Swivel80105T6300000180105T6200000179975T8800000
    880"24"10"122"32"61"80"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2380575T112000000001 Swivel80105T6300000180105T6200000179975T8800000
    990"24"10"11 ft.32"67"90"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2380575T113000000001 Swivel80105T6300000180105T6200000179975T8800000
    10100"24"10"130"32"72"100"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.2380575T68000000001 Swivel80105T6300000180105T6200000179975T8800000
    10100"26"10"142"42"72"100"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2380575T71000000001 Swivel80105T6300000180105T6200000179975T8800000
     

    Corrosion-Resistant Tilt-to-Roll High-Stability Platform Ladders

    Image of Product. Front orientation. Contains Annotated. Ladders. Corrosion-Resistant Tilt-to-Roll High-Stability Platform Ladders.
    Image of Specification. Front orientation. Contains Border. Diamond-Tread Step. Corrosion-Resistant Tilt-to-Roll High-Stability Platform Ladders.

    Diamond-Tread Step

    Image of Specification. Front orientation. Contains Border. Serrated Step. Corrosion-Resistant Tilt-to-Roll High-Stability Platform Ladders.

    Serrated Step

    Made of 304 stainless steel, these ladders are more corrosion resistant than steel and aluminum ladders. They withstand wet environments and repeated washdowns. Tilt these ladders to roll them on their wheels. When you set the ladders upright again, the wheels lift off the floor to keep them stationary while in use. The number of steps listed includes the platform.
    Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Diamond-Tread Step—Diamond steps have an open grid that lets liquids, such as oil, and dirt pass through better than serrated steps. Without raised treads, they’re comfortable to stand on—even when you’re not wearing work boots.
    Serrated Step—Serrated steps have sharp, raised treads that give you better slip resistance than diamond steps. However, standing on them for extended periods without work boots may be uncomfortable.
    Ladders
    Replacement
    Nonskid Feet/Pads
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Max. Climbing
    Ht.
    Wt. Cap.,
    lb.
    Ground Clearance
    Ht.
    Wheel
    Configuration
    Assembly
    With
    Handrail
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    304 Stainless Steel
     
    Diamond-Tread Steps and Platform
    220"24"10"50"28"23"20"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T1110000000179975T88000000
    220"24"20"50"28"34"20"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11200000000179975T8800000
    330"24"10"5 ft.28"30"30"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4200000000179975T8800000
    330"24"20"5 ft.28"40"30"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4600000000179975T8800000
    440"24"10"70"28"37"40"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4300000000179975T8800000
    440"24"20"70"28"46"40"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4700000000179975T8800000
    550"24"10"92"28"43"50"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11300000000179975T8800000
    550"24"20"92"28"54"50"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4800000000179975T8800000
     
    Serrated Steps and Platform
    220"24"10"50"28"23"20"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11400000000179975T8800000
    220"24"20"50"28"34"20"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11800000000179975T8800000
    330"24"10"5 ft.28"30"30"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11500000000179975T8800000
    330"24"20"5 ft.28"40"30"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11900000000179975T8800000
    440"24"10"70"28"37"40"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11600000000179975T8800000
    440"24"20"70"28"46"40"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T12100000000179975T8800000
    550"24"10"92"28"43"50"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11700000000179975T8800000
    550"24"20"92"28"54"50"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T12200000000179975T8800000
     
    Replacement Wheels

    Clean Room Work Platforms

    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Clean Room Work Platforms.
    Platforms have a smooth finish and sanitary-grade welds, so there are no cracks or crevices that can harbor dust, dirt, and bacteria.
    Note: The number of steps listed includes the platform.
    316 Stainless Steel—They are 316 stainless steel to withstand repeated washdowns.
    Perforated—Platform is perforated to provide slip resistance.
    Perforated Step—Steps are perforated to provide slip resistance.
    Six Swivel Casters—Easily move the platform with the six swivel casters.
    Spring-Loaded Casters—They’re spring loaded to stay stationary while in use—when you step on, the casters retract; when you step off, the casters roll again.
    Fed. Std. Class 100 and ISO Class 5—Access elevated areas with these platforms that meet Fed. Std. Class 100 and ISO Class 5 clean room requirements.
    Platform
    Overall
    Steps
    Wd.
    Dp.
    Ht.
    (D)
    Tread
    Wd.
    (B)
    Dp.
    (C)
    Wd.
    Dp.
    Tread
    Ground Clearance
    Ht. (E)
    Wt. Cap.,
    lb.
    Assembly
    Wheel
    Configuration
    Wt. Actuation Type
    Clean Room Std.
    Each
    316 Stainless Steel
     
    56" Overall Height (A)
    34"48"20"Perforated36"54"34"8"Perforated20"300AssembledSix Swivel CastersSpring-Loaded CastersFed. Std. Class 100, ISO Class 5
    4193N11000000000
     

    Rolling Clean Room Step Stools

    Image of Product. Front orientation. Contains Annotated. Step Stools. Rolling Clean Room Step Stools.
    With spring-loaded casters, these step stools are easy to move between work areas in your clean room. When you're on the stool, the casters retract to keep the stool stationary; when you step off, the casters roll again. Stools meet Fed. Std. Class 100 and ISO Class 5 clean room requirements. Made of 316 stainless steel, they withstand repeated washdowns. Steps are perforated for slip resistance that’s easy on your shoes. The leveling feet and wheels are nonmarring.
    Overall
    Top
    Step
    Middle
    Step
    Bottom
    Step
    No. of
    Steps
    Wt. Cap.,
    lb.
    Ladder Duty
    Rating
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wd.
    Dp.
    Assembly
    Wheel
    Configuration
    Features
    Clean Room Std.
    Specs. Met
    Each
    316 Stainless Steel
     
    With Perforated Steps
    2300Type IA25"30"21 1/2"21"28"13"28"7 1/2"AssembledFour Swivel CastersNonskid Leveling FeetFed. Std. Class 100, ISO Class 5
    OSHA Compliant 29 CFR 1926.1053
    5420N12000000000
    3300Type IA34"30"29"31"28"13"28"7 1/2"28"7 1/2"AssembledFour Swivel CastersNonskid Leveling FeetFed. Std. Class 100, ISO Class 5
    OSHA Compliant 29 CFR 1926.1053
    5420N1100000000
     
    back to top